sir4o
Newbie

Activity: 67
Merit: 0
|
 |
March 13, 2018, 12:48:11 PM |
|
Upgraded to 11.4 and quite stable for me as 11.3. Will monitor the stales for 24h though....
|
|
|
|
|
DiHunter
Member


Activity: 154
Merit: 28
|
 |
March 13, 2018, 12:48:20 PM |
|
Hello. Does anybody have Sapphire rx 550 4gb? What is the hashrate with 11.3 version on ETH? Do your cards find more shares now with increased hashrate on 11.3 version?
I have a couple of this cards, all with Micron RAM and modded BIOS. The hashrate is ~13 Mh/s @23W up to ~14 Mh/s @30W, it depends on your gpu-core and RAM speed/voltage settings. I got Saphhire RX550 2GB, mining MUSICOIN with v11.3, speed increase from 11.xMH/s to 13.7MH/s. Shares increase a bit, not very much.
Thank you guys. R0land , can you send me your modded bios, please?
|
|
|
|
|
RYXES
Member


Activity: 140
Merit: 10
Merit me or don't.
|
 |
March 13, 2018, 12:56:49 PM |
|
MSI RX580 8GB gone from 29.79mh/s to 30.28mh/s.
Although the Wattage has increased from 88W to 100W, undervolting in script seems slightly off. Need to test some different volts and check if it is still controlled through the script.
|
Merit me or don't.
|
|
|
|
mshordja
|
 |
March 13, 2018, 01:03:40 PM |
|
any feedback for stale shares? and what about incorrect shares?
|
|
|
|
mayers8851
Newbie

Activity: 45
Merit: 0
|
 |
March 13, 2018, 01:12:41 PM |
|
any feedback for stale shares? and what about incorrect shares?
Zero incorrects for 16 hours, 1% stale shares, sometimes 2% and sometimes 0%.
|
|
|
|
|
RYXES
Member


Activity: 140
Merit: 10
Merit me or don't.
|
 |
March 13, 2018, 01:17:38 PM |
|
any feedback for stale shares? and what about incorrect shares?
Currently, my v11.4 Rig is 9% stale and my v10.0 Rig is 0% stale.
|
Merit me or don't.
|
|
|
|
mshordja
|
 |
March 13, 2018, 01:23:49 PM |
|
any feedback for stale shares? and what about incorrect shares?
Zero incorrects for 16 hours, 1% stale shares, sometimes 2% and sometimes 0%. if these are the numbers are very promising
|
|
|
|
|
john1010
|
 |
March 13, 2018, 01:50:36 PM |
|
In your opinion guys, which is better version should i use 11, 11.2 or the new one? Hope that i can get your advice, thanks
|
|
|
|
|
Omg9500
Newbie

Activity: 112
Merit: 0
|
 |
March 13, 2018, 01:53:20 PM |
|
I use 11.4 without any problems or errors hence I recommend 11.4
|
|
|
|
|
|
john1010
|
 |
March 13, 2018, 02:07:07 PM |
|
I use 11.4 without any problems or errors hence I recommend 11.4
Thanks I will give it a try. How about the stale share it will decrease or increase?
|
|
|
|
|
Elange
Newbie

Activity: 73
Merit: 0
|
 |
March 13, 2018, 02:36:26 PM |
|
I use 11.4 without any problems or errors hence I recommend 11.4
Thanks I will give it a try. How about the stale share it will decrease or increase? Don't know about stale shares, but going from V11.2 to V11.3 increased card fail rate for my AMD rigs (GPU hangs on OpenCL call). There was no hashrate rise, but 11.3 is less stable. Everyone's going for Phoenix miner anyways, it's much stable and much lower devfee heh. I can't upgrade to Phoenix because I run linux.
|
|
|
|
|
_voyager_
Newbie

Activity: 12
Merit: 0
|
 |
March 13, 2018, 02:45:25 PM |
|
Is the Win 10 v.1709 mandatory for more than 8xAMD GPU or the newest Adrenaline Edition driver v.18 3.2 enough?
|
|
|
|
|
53nsk
Newbie

Activity: 26
Merit: 0
|
 |
March 13, 2018, 02:48:31 PM |
|
Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080  Other cards (various 570 and 580) still working without issues.
|
|
|
|
|
janding
Jr. Member

Activity: 170
Merit: 6
|
 |
March 13, 2018, 03:08:24 PM |
|
 My experience with 11.4 and Stale Shares. Arrow marks the spot where I upgraded from 11.3 to 11.4 The image is 11.3 to left of arrow and 11.4 to the right. I would say this is a great success in reducing stale shares from 11.3 to 11.4 Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions. I would say this is a complete success.
|
|
|
|
|
Omg9500
Newbie

Activity: 112
Merit: 0
|
 |
March 13, 2018, 03:10:27 PM |
|
I cannot see any. Others apparently do...
|
|
|
|
|
Omg9500
Newbie

Activity: 112
Merit: 0
|
 |
March 13, 2018, 03:11:46 PM |
|
https://i.imgur.com/EL9xHtp.gifMy experience with 11.4 and Stale Shares. Arrow marks the spot where I upgraded from 11.3 to 11.4 The image is 11.3 to left of arrow and 11.4 to the right. I would say this is a great success in reducing stale shares from 11.3 to 11.4 Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions. I would say this is a complete success. where do you get this graph?
|
|
|
|
|
RYXES
Member


Activity: 140
Merit: 10
Merit me or don't.
|
 |
March 13, 2018, 03:13:25 PM |
|
 My experience with 11.4 and Stale Shares. Arrow marks the spot where I upgraded from 11.3 to 11.4 The image is 11.3 to left of arrow and 11.4 to the right. I would say this is a great success in reducing stale shares from 11.3 to 11.4 Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions. I would say this is a complete success. where do you get this graph? Ethermine mining pool.
|
Merit me or don't.
|
|
|
janding
Jr. Member

Activity: 170
Merit: 6
|
 |
March 13, 2018, 03:18:02 PM |
|
 My experience with 11.4 and Stale Shares. Arrow marks the spot where I upgraded from 11.3 to 11.4 The image is 11.3 to left of arrow and 11.4 to the right. I would say this is a great success in reducing stale shares from 11.3 to 11.4 Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions. I would say this is a complete success. where do you get this graph? Ethermine mining pool. Yes. Ethermine mining pool.
|
|
|
|
|
androstan1234
Jr. Member

Activity: 251
Merit: 6
|
 |
March 13, 2018, 03:20:04 PM |
|
I love version 11.4, but it's annoying that Windows Defender sees it as a virus. Just annoying, not a dealbreaker.
|
|
|
|
|
Omg9500
Newbie

Activity: 112
Merit: 0
|
 |
March 13, 2018, 03:25:29 PM |
|
Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080  Other cards (various 570 and 580) still working without issues. Question is at what hashrate your cards were running.... My Nitro+ RX580 are running at 1175/850 core and 2200/875 mem and output per card is 31.5 mh/s. this is from claymore 11.4
|
|
|
|
|
|