Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Havane]

Hi everyone, my miner has been working fine for several days in a row, until all of a sudden it has started mining at 0.000 MH/s, just after switching from Dev mining fee (which is not actually mined but still appear) to the pool where I am mining.

It was really weird as it kept mining for a good 15 minutes at 0.000 Mh/s without restarting or stopping, and even closing and restarting Claymore's software it was still mining at 0.000 Mh/s, while after restarting the miner itself it has started working normally again.

I have searched but it looks like no one has got this issue? All I could see online was people having one GPU going to 0, but not all 6 GPU and the software still going.

Any idea why this happened?

Any help is appreciated, thanks.

My rig is made of 5x XFXrx480 8GB GPUs + 1x rx480Nitro 8GB and the batch file is the standard one, as recommended in Claymore's readme.

Any idea regarding this? Thanks

Maybe a windows update.
Try to uninstall the driver with ddu, and install the blockchain driver

[armyman]

Hi everyone, my miner has been working fine for several days in a row, until all of a sudden it has started mining at 0.000 MH/s, just after switching from Dev mining fee (which is not actually mined but still appear) to the pool where I am mining.

It was really weird as it kept mining for a good 15 minutes at 0.000 Mh/s without restarting or stopping, and even closing and restarting Claymore's software it was still mining at 0.000 Mh/s, while after restarting the miner itself it has started working normally again.

I have searched but it looks like no one has got this issue? All I could see online was people having one GPU going to 0, but not all 6 GPU and the software still going.

Any idea why this happened?

Any help is appreciated, thanks.

My rig is made of 5x XFXrx480 8GB GPUs + 1x rx480Nitro 8GB and the batch file is the standard one, as recommended in Claymore's readme.

Any idea regarding this? Thanks

aybe a windows update.
Try to uninstall the driver with ddu, and install the blockchain driver

Thank you for your reply, I have done this just a couple of days ago and the miner was working just fine apart from this problem that I have described.

[bithead007]

I'm getting a weird 11.6 problem on latest-patched Windows 10 for one rig that has 4 GTX 1060 cards (2 of them only 3GB) and 3 AMD cards (MX570 and 580).  The software starts then crashes after the banner but before any cards are recognized. Zero useful information in the logs or from Windows. Device Manager is clear.  What do I look for?

[jeremyismer]

I'm getting a weird 11.6 problem on latest-patched Windows 10 for one rig that has 4 GTX 1060 cards (2 of them only 3GB) and 3 AMD cards (MX570 and 580).  The software starts then crashes after the banner but before any cards are recognized. Zero useful information in the logs or from Windows. Device Manager is clear.  What do I look for?

Check your anti virus or windows defender aren't shutting it down. It sounds just like mine when I forget to add an exception.

[bithead007]

I'm getting a weird 11.6 problem on latest-patched Windows 10 for one rig that has 4 GTX 1060 cards (2 of them only 3GB) and 3 AMD cards (MX570 and 580).  The software starts then crashes after the banner but before any cards are recognized. Zero useful information in the logs or from Windows. Device Manager is clear.  What do I look for?

Check your anti virus or windows defender aren't shutting it down. It sounds just like mine when I forget to add an exception.

Thanks but that's not it. I added another exclusion anyway. 

Can you think of anything else to check?  Already reinstalled the Claymore software.

CJ

[leonix007]

I'm getting a weird 11.6 problem on latest-patched Windows 10 for one rig that has 4 GTX 1060 cards (2 of them only 3GB) and 3 AMD cards (MX570 and 580).  The software starts then crashes after the banner but before any cards are recognized. Zero useful information in the logs or from Windows. Device Manager is clear.  What do I look for?

Check your anti virus or windows defender aren't shutting it down. It sounds just like mine when I forget to add an exception.

Thanks but that's not it. I added another exclusion anyway. 

Can you think of anything else to check?  Already reinstalled the Claymore software.

CJ

Start with basic troubleshoot, use 1 card only, install it on PCIe x16, Uninstall/Reinstall driver, then run miner

if successful then add other GPU's

[bithead007]

I'm getting a weird 11.6 problem on latest-patched Windows 10 for one rig that has 4 GTX 1060 cards (2 of them only 3GB) and 3 AMD cards (MX570 and 580).  The software starts then crashes after the banner but before any cards are recognized. Zero useful information in the logs or from Windows. Device Manager is clear.  What do I look for?

Check your anti virus or windows defender aren't shutting it down. It sounds just like mine when I forget to add an exception.

Thanks but that's not it. I added another exclusion anyway. 

Can you think of anything else to check?  Already reinstalled the Claymore software.

CJ

Start with basic troubleshoot, use 1 card only, install it on PCIe x16, Uninstall/Reinstall driver, then run miner

if successful then add other GPU's

That's a last effort I think, this was working, and now 2 more miners have since gone down. What's going on with 11.6, some kind of time bomb?

CJ

[Suslived]

One one of my new rigs i am using claymore's miner with my GTX 1070 but am only getting 2 MHs. Any ideas?
I've already tried overclocking but its still the same. It's strange because i can mining ZEC at the expected hashrate of. 400+ h/s. Just when mining ETH with claymore that hashrate is so low.

[leonix007]

One one of my new rigs i am using claymore's miner with my GTX 1070 but am only getting 2 MHs. Any ideas?
I've already tried overclocking but its still the same. It's strange because i can mining ZEC at the expected hashrate of. 400+ h/s. Just when mining ETH with claymore that hashrate is so low.

is the GPU connected to a monitor? try to plug them or remove then observe

how many GPU's of 1070 getting 2mhs?

Are you using risers? try to plug them in PCIe x16 slot

these are only basics that you could try

[bithead007]

I'm getting a weird 11.6 problem on latest-patched Windows 10 for one rig that has 4 GTX 1060 cards (2 of them only 3GB) and 3 AMD cards (MX570 and 580).  The software starts then crashes after the banner but before any cards are recognized. Zero useful information in the logs or from Windows. Device Manager is clear.  What do I look for?

Check your anti virus or windows defender aren't shutting it down. It sounds just like mine when I forget to add an exception.

Thanks but that's not it. I added another exclusion anyway. 

Can you think of anything else to check?  Already reinstalled the Claymore software.

CJ

Start with basic troubleshoot, use 1 card only, install it on PCIe x16, Uninstall/Reinstall driver, then run miner

if successful then add other GPU's

That's a last effort I think, this was working, and now 2 more miners have since gone down. What's going on with 11.6, some kind of time bomb?

CJ

It seems that after running troublefree for 3 weeks there were 3 machines that all died within 2 hours with 3 different problems.

[ArtaxCoin]

Great Mining Program.  One of my favorites.   

[Dubbeh]

Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.

3GB Zotacs DAG file too big again .. thanks for the extra month xx

[Jax1979]

Great Mining Program.  One of my favorites.   

But today it stop mine on GTX 1060 3gb((

Ceгoдня c yтpa yжe нe дoбывaeт эфиp видeoкapтa gtx 1060 c 3gb нa win10

http://priscree.ru/img/266398352ae8ab.jpg

[ziadsa]

Hello, is it possible to add Cryptonight light V7,

my favourite software is Claymore, and if you can help us out and add this cryptinight light V7 support, as many coin now use this algo to fight ASIC.

[Dubbeh]

same here .. it was inevitable .. 3gb zotacs were near end of dag file size

Great Mining Program.  One of my favorites.   

But today it stop mine on GTX 1060 3gb((

Ceгoдня c yтpa yжe нe дoбывaeт эфиp видeoкapтa gtx 1060 c 3gb нa win10

http://priscree.ru/img/266398352ae8ab.jpg

[mbdmbn]

same here .. it was inevitable .. 3gb zotacs were near end of dag file size

Great Mining Program.  One of my favorites.   

But today it stop mine on GTX 1060 3gb((

Ceгoдня c yтpa yжe нe дoбывaeт эфиp видeoкapтa gtx 1060 c 3gb нa win10

Switch to windows 7 or linux, you'll be good for another while.

[potificate]

I want to know i have 2 GPU GPU0 1060 and GPU1 1070ti
want to mine with GPU1 only and and leave the GPU0 Idle what to do?

add -di 1 to your bat file (same line as the rest)

[Claymore]

v11.7:

- added temperature management and overclock support for recent Nvidia cards in Windows: "-tt", "-powlim", "-cclock", "-mclock", "-tt", "-fanmax", "-fanmin" options are supported for Nvidia too.
- now "y" key also disables CrossFire.
- added "-y" option.
- fixed issue with miner restart that was required sometimes to apply overclock settings for AMD cards.
- fixed issue with rejected shares when "-esm 3" option is used.
- Linux version: fixed issue with remote management.
- some changes in watchdog routines to improve ability to restart miner after various OpenCL fails.
- a few minor bug fixes and improvements.

PS. For Nvidia "-cclock" and "-mclock" options also support delta mode, for example, "-mclock +400", see readme for details.

[Krishi]

My 1060 3gb could no longer mine since today because of the DAG, not unexpected, I knew it was coming.

My problem:
I'm now using integrated graphics for windows and my GPU is sitting quietly in the PCIe slot, no load, no VRAM usage, nothing.
Yet when I try and run the miner again i get the same problem of not enough VRAM. By using integrated graphics for windows I freed up 300-400mb of VRAM for my GPU, is that still not enough??

[salvo2002]

Thanks for the updated version @Claymore!

Quick question...on Linux [HiveOS] when I run two claymore dual instances [v11.6] eth only mode (split up a 10 card rig // -di 01234 in one mining eth and -di 56789 in the other mining etc) claymore reports the temps and fan settings for all 10 cards in both instances and I get OpenCL hangs. If I run one instance of claymore with all 10 cards its stable -- no OpenCL hangs.

I assume I get the OpenCL hangs when running two instances due to both instances trying to query temps & fan speeds at the same time. Is there a setting I am missing that only queries/controls the cards enabled in the instance