AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
November 26, 2018, 09:29:25 PM |
|
After dag 224 miner says that "Socket was closed remotely by pool. Along time that not mined for developing mode" or something like that and then set automatically nofee mode and decrease the hashrate. I didn't any thing in my rig. What's is problem. Has any one the same problem? I am from Iran. Is it possible that ISP steal the shares?
Unfortunately I am from Iran too and I'm sure our ISPs In addition to highly web censoring, block most important ports and services too. For example I can't connect to ethermine.org with ports 4444 and 5555 because my ISP (Fanava) blocked this ports and I can only use port 14444 without SSL on ethermine.org. But since version 11.0 Claymore only uses SSL and port 5555 for dev-fee mining and only for this reason I had to change my pool from ethermine.org to nanopool.org or use another Eth miner. Now I use PhoenixMiner for months and as a fu*king Iranian, I recommend you to use this miner instead of Claymore but don't update AMD Driver to newer than 18.9.3 because PhoenixMiner don't recognize newer AMD drivers. https://bitcointalk.org/index.php?topic=2647654.0Sorry for my bad English, as you know our language is Farsi and our best English assistant is Google Translate Your english is good. Why it is problem to mine with 1% fee? It gives you about 2% more than nofee option.
|
|
|
|
|
|
|
|
I HATE TABLES I HATE TABLES I HA(╯°□°)╯︵ ┻━┻ TABLES I HATE TABLES I HATE TABLES
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
jojoledemago
Newbie
Offline
Activity: 10
Merit: 0
|
|
November 27, 2018, 12:05:15 AM Last edit: November 27, 2018, 12:26:12 AM by jojoledemago |
|
Hi ! Am I the only one to see very big fluctuations in my hashrate since about 7 hours I'm mining ethereum with nanopool for several months and it's the first time I can see that... EDIT : sorry I just figured out what was going wrong, I have an IOTA node running on my miner and hashrate came back to regular basis when I stopped it...
|
|
|
|
miner95
Newbie
Offline
Activity: 28
Merit: 2
|
|
November 27, 2018, 01:53:38 PM |
|
Your english is good. Why it is problem to mine with 1% fee? It gives you about 2% more than nofee option.
I don't know about others but even 2% means a lot to me, because I mine with only two RX 580 and have only 62MH that give me 0.032 ETH a week. In my country, a US Dollar is equal to the price of a full pizza (1,500,000 Rial) and because that I can still pay my electricity bills and also make a profit even at very low ETH prices
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
November 27, 2018, 03:08:58 PM |
|
Your english is good. Why it is problem to mine with 1% fee? It gives you about 2% more than nofee option.
I don't know about others but even 2% means a lot to me, because I mine with only two RX 580 and have only 62MH that give me 0.032 ETH a week. In my country, a US Dollar is equal to the price of a full pizza (1,500,000 Rial) and because that I can still pay my electricity bills and also make a profit even at very low ETH prices What I mean: Claymore's nofee option mines 3% less than full 1%fee ( as several ppl reported ) so is still 2% better. And 2% is a lot nowadays...
|
|
|
|
RentGPU
|
|
November 28, 2018, 05:43:48 AM |
|
How can i autostart the miner with windows but sets a delay about 5mins after windows boot , i tried to make a batch file to load at startup then a timer in the batch starts the miner but it didn't the miner crashes Anyone knows how to do it the right way?
|
2016 GPU Miner
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
November 28, 2018, 06:48:49 AM |
|
How can i autostart the miner with windows but sets a delay about 5mins after windows boot , i tried to make a batch file to load at startup then a timer in the batch starts the miner but it didn't the miner crashes Anyone knows how to do it the right way?
Winpatrol, there is "Delayed Start" tab...and a lot more
|
|
|
|
senya2k
Newbie
Offline
Activity: 31
Merit: 0
|
|
November 28, 2018, 02:38:45 PM |
|
How can i autostart the miner with windows but sets a delay about 5mins after windows boot , i tried to make a batch file to load at startup then a timer in the batch starts the miner but it didn't the miner crashes Anyone knows how to do it the right way?
timeout /t 300
|
|
|
|
VasilyS
|
|
November 28, 2018, 03:13:04 PM |
|
Anyone still gpu mining? It is not mining at the moment. It is heating of the apartment using mining rigs. Hope in a few weeks the situation will be changed to something better.
|
|
|
|
abstractHaze
Newbie
Offline
Activity: 106
Merit: 0
|
|
November 28, 2018, 04:54:13 PM |
|
.8 etc a day to over 2. id say rewards going up lol.
|
|
|
|
RentGPU
|
|
November 28, 2018, 06:42:20 PM |
|
How can i autostart the miner with windows but sets a delay about 5mins after windows boot , i tried to make a batch file to load at startup then a timer in the batch starts the miner but it didn't the miner crashes Anyone knows how to do it the right way?
timeout /t 300 What is the right start command you use after the timeout command , i used start "start batch path" but it crashes
|
2016 GPU Miner
|
|
|
Bojcha
|
|
November 28, 2018, 07:37:21 PM |
|
How can i autostart the miner with windows but sets a delay about 5mins after windows boot , i tried to make a batch file to load at startup then a timer in the batch starts the miner but it didn't the miner crashes Anyone knows how to do it the right way?
timeout /t 300 What is the right start command you use after the timeout command , i used start "start batch path" but it crashes 300 is ofc too much, for win10 5-10 is enough with ssd, on win7 15-20. But always best is to test it.
|
|
|
|
Jonet
Jr. Member
Offline
Activity: 82
Merit: 3
|
|
November 28, 2018, 08:30:16 PM |
|
What is the right start command you use after the timeout command , i used start "start batch path" but it crashes
Maybe change directory to where Claymore miner is before you start the batch file
|
|
|
|
dwarf0
Newbie
Offline
Activity: 49
Merit: 0
|
|
November 30, 2018, 06:03:56 AM |
|
Hello Claymore. Are you planning to release free version of the miner for win 7 like you did for win 10? I mean 3GB and lower cards.
|
|
|
|
cscheat
Newbie
Offline
Activity: 84
Merit: 0
|
|
December 01, 2018, 10:00:04 AM |
|
Mr CLaymore. any ETA for CLAYMORE V12 ?
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
December 01, 2018, 02:24:51 PM |
|
just put
:start timeout /t 3 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
Program.exe
goto start
should do the trick
|
|
|
|
Ursul0
|
|
December 04, 2018, 05:29:55 PM |
|
How can i autostart the miner with windows but sets a delay about 5mins after windows boot , i tried to make a batch file to load at startup then a timer in the batch starts the miner but it didn't the miner crashes Anyone knows how to do it the right way?
The right way would be to use Task Scheduler, create a task there and in the "Triggers" add one that suits you (I normally use sysinternal's autologon + trigger "at logon" in Task Scheduler ) and set the desired delay there.
|
|
|
|
johnambush
|
|
December 04, 2018, 10:59:31 PM |
|
Ok. I have not been mining since April this year. I have Sapphire RX 470 4Gb. First reason was that Windows update that slowed down rig. So I figured it out. Now I have problem getting full hash with this card on windows 10. I keep getting 50% lower hash rate than it can give, around 13.8. Windows version is 17.03. I managed 3 months ago to get 27.4 just to see is it possible to mine with these cards. Then I had to format disc and now I don't know what drivers version was that and how to get full hash. With every driver I tried I get 50% less. Can someone give me advice with this? Someone still mine with this cards?
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
December 05, 2018, 12:34:34 AM |
|
Ok. I have not been mining since April this year. I have Sapphire RX 470 4Gb. First reason was that Windows update that slowed down rig. So I figured it out. Now I have problem getting full hash with this card on windows 10. I keep getting 50% lower hash rate than it can give, around 13.8. Windows version is 17.03. I managed 3 months ago to get 27.4 just to see is it possible to mine with these cards. Then I had to format disc and now I don't know what drivers version was that and how to get full hash. With every driver I tried I get 50% less. Can someone give me advice with this? Someone still mine with this cards?
Man...1709 win updated but without 1803 or 1809 or 1811 ( updates/advanced/feature postponed to 365days ) 18.5.1 drivers , with Compute mode "on". Atikmdag patched, ofc...
|
|
|
|
wpsd
Newbie
Offline
Activity: 41
Merit: 0
|
|
December 05, 2018, 11:34:07 AM |
|
Hi what encoding do you use that appear in the console and log file ?
|
|
|
|
crypper
Member
Offline
Activity: 239
Merit: 12
|
|
December 05, 2018, 01:11:51 PM |
|
How can i autostart the miner with windows but sets a delay about 5mins after windows boot , i tried to make a batch file to load at startup then a timer in the batch starts the miner but it didn't the miner crashes Anyone knows how to do it the right way?
timeout /t 300 What is the right start command you use after the timeout command , i used start "start batch path" but it crashes I do it in this way. Here is the bat file that I just add to startup folder: REM 1. allow 5 min for windows to settle timeout /t 300
REM 2. send email notification to myself that miner restarted powershell.exe -nonprofile -executionpolicy bypass -file C:\path_to_powershell_script.ps1 timeout /t 10
REM 3. load overclocks by OverdriveNtool start cmd /k "cd C:\path_to_file_with_overclocks" timeout /t 30
REM 4. start claymore start cmd /k "cd C:\path_to_claymore_bat_file"
|
|
|
|
|