Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[fittsy]

is this miner mine EXP ?

Yes you can mine EXP with this.  Read the first post or read the readme.txt included.

-allcoins exp

[adamvp]

Hello Comunity!
The story is little bit complicated,but i will try to tell you with some words.
Before 1week a good friend of mine call me and tell me that he owned 2 miners.I was excited.He tell me that he was bought the machines,but no have idea how to manage them and etc.,the man who managed them was start job that need to travel and cant support him.And now the miners are in my home,cuz its interested for me to "touch" crypto-currency.Thats is the story and now  i have some problems and etc.
They are two rigs metal construction 70x40x70cm.
First one:
MB:Asrock H81 Pro BTC
PSU:2xAurum Au-1200 proH
GPU:6xR9 390 [4xR9 390 windforce   2xR9 390 Sapphire Nitro]
HDD:120Gb SSD
CPU:Intel Celeron G1840 2.8Ghz
RAM:8Gb Adata
Powered risers
OS:Windows 10.0.10586
Second one:
MB:Asrock H81 Pro BTC
PSU:2xAurum Au-1200 proH
GPU:6xRX 480 [4xSapphire Radeon RX480 Nitro]
HDD:120Gb SSD
RAM:8Gb Patriot
CPU:Intel Celeron G1840 2.8Ghz
OS:Windows 10.0.14393


And now i will tell you what happends here.I use Claymore Dual Miner v5.1 on both miners.Used Crimson 16.6 on both.Installed TeamViewer on both.
Rig with R9 390 is stable now,but when try to open GPU-Z in background crash,windows stuck.On the beggining when i take this machines that rig ofently shows blue screen:thread_stuck_in_device_driver after that restart and wont up before switch PSUs and turn on againt,now i mining in single mode and its stable if you dont try to start GPU-Z.These are the setting of GPUs Those settings are set for 4GPUs and for other 2 are:Clock:+10,5 ;Power: 0% ;Mem Clock:1575Mhz
Fan:100%.
Now i mining with this rig in single mode with 196Mh/s.In dual mode rig crash after time.
Command Line:EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYADRESS7bad2985ee264cf67b0c12db7d.rig1 -epsw x
I make and reboot.bat and try to use -r 1 and miners says no reboot.bat file.My reboot file is:C:\Windows\System32\shutdown.exe /r /t 5 /f.


Rig with RX 480 this is super strange machine.On the begining its runs with 6xGPUs and stuck after time,windows freeze.And waits for hard restart.yesterday i have many GPU fault and miner crash and crash,then i decide to remove one GPU and i remove one RX 480(not NITRO).And the machine runs very well.Today when i back from work i saw that in the miner have only 3GPUs and the second PSU was stopped.I try to turn on/off from the button,but nothing happens,i need to remove the bridge between Green and Black from molex and put again to start the PSU.Now i mining with 5xGPUs and seems stable.
GPU settings:
4xGPUs are set to 1342 Mhz and 1xGPU is set to 1250Mhz
Mining in single mode with 124 MH/s.
Command line:EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal MYADRESS85ee264cf67b0c12db7d.RX_480 -epsw x

I tried on both miners to set -r 1 to reboot when gpu faults but without success.I try on both -dbg 1 but its only create 2 files(on R9 390) one was empty,second was :Missed option value after -r option; ( then i see i was space between r and 1,and correct it)But everytime when something gone wrong its not reboot and dont make debug file.
Guys do you have some suggestions what to do?

They Draw from the wall 200kW/h for 6 days.

And some pics:

Try to check cards separately one by one..

[Trimegistus]

@Claymore, we need a new second coin to mine... DCR, LBR and SC are worthless

Any ideas?   

[molitar]

I could not get the remote management to work.. tried..   http://192.168.1.3:3333  and https://192.168.1.3333 and it does not work. Port scanner shows the port open and active but the browser can not open the page just sits there spinning.

[fr4nkthetank]

I could not get the remote management to work.. tried..   http://192.168.1.3:3333  and https://192.168.1.3333 and it does not work. Port scanner shows the port open and active but the browser can not open the page just sits there spinning.

try putting -mport -3333 for just monitoring see if that works.  or, try choosing another port -mport xxxx

[chakchaks]

I could not get the remote management to work.. tried..   http://192.168.1.3:3333  and https://192.168.1.3333 and it does not work. Port scanner shows the port open and active but the browser can not open the page just sits there spinning.

Try this http://localhost:3333/

[padrino]

I could not get the remote management to work.. tried..   http://192.168.1.3:3333  and https://192.168.1.3333 and it does not work. Port scanner shows the port open and active but the browser can not open the page just sits there spinning.

Browser meaning a web browser or the remote management app? Unless something changed recently you need to see the application provided in the windows archive for remote management

[giagge]

Any news for mining ETH + Zcash on nvidia windows ? .

[CoRpO]

Any news for mining ETH + Zcash on nvidia windows ? .

Both are using the same part of the gpu, so that's unlikely to happen

[denis1995]

Is this the more powerfull miner?

[Psynthax]

I need help with my 6x 1070 rig.. I keep getting the following error and then the miner crashes and restarts..
I didnt overclock it is on default settings..

NVML: cannot get current temperature, error 999 (an internal driver error occurred)
GPU 0, GpuMiner cu_k02 failed 30, unknown error
GPU 0, GpuMiner kx failed 1
GPU 3, GpuMiner kx failed 1
GPU 5, GpuMiner kx failed 1
GPU 4, GpuMiner cu_k02 failed 30, unknown error
GPU 4, GpuMiner kx failed 1
GPU 1, GpuMiner cu_k02 failed 30, unknown error
GPU 1, GpuMiner kx failed 1
NVML: cannot get current temperature, error 999 (an internal driver error occurred)


Any help would be appreciated.. Thanks

[sp_]

@Claymore, we need a new second coin to mine... DCR, LBR and SC are worthless

Any ideas?  

Steem

http://coinmarketcap.com/currencies/steem/

[Marvell1]

@Claymore, we need a new second coin to mine... DCR, LBR and SC are worthless

Any ideas?  

Steem

http://coinmarketcap.com/currencies/steem/

Get it done claymore

[Claymore]

@Claymore, we need a new second coin to mine... DCR, LBR and SC are worthless

Any ideas?  

Steem

http://coinmarketcap.com/currencies/steem/

Get it done claymore

Sorry, I'm too busy currently, also have to sleep sometimes

[Trimegistus]

Sorry, I'm too busy currently, also have to sleep sometimes

Man, you released 4 versions of your ZEC miner... Focus on this one for a while, will you?

Please?  

[Namiks]

Just decided (well, was going to) to start mining Eth again after not doing so for a while.

Are 2GB cards now useless due to DAG size?

[gribgo]

Sorry, I'm too busy currently, also have to sleep sometimes

Man, you released 4 versions of your ZEC miner... Focus on this one for a while, will you?

Please?  

I hope it will be ZEC + ETH (ETC)
what do you think Claymore?
peace

[semajjames]

does any one know what cause this

OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s

cheers

[Namiks]

does any one know what cause this

OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s

cheers

It's most likely due to the fact that the DAG size is too much for 2GB GPUs.

[semajjames]

does any one know what cause this

OpenCL error - cannot allocate big buffer for DAG
OpenCL error -38 - cannot write buffer for DAG
ETH: 11/08/16-20:00:22 - New job from europe1.ethereum.miningpoolhub.com:20535
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s

cheers

It's most likely due to the fact that the DAG size is too much for 2GB GPUs.

thanks ,, I have 4gb gpu and i lowered -ethi down to 1 ,,,,still the same