Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[madmartyk]

Can the miner be configured to work with ethermine.org/

[1714040838]

1714040838

[1714040838]

1714040838

[MTJ151]

+1 wanting a solo miner version of this

[Eliovp]

Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

[qqqq]

OK, so I actually took the time to look through the thread for Claymore's comments on creating a solo version. Seems he wants to do it, but it isn't a priority for him.

Here are good reasons to support solo mining:

Decentralization and overall ETH health (People, get off of dwarf FFS!!)

No loss of revenue due to pool mining. I ALWAYS come out ahead solo mining VS pool mining with ETH, I've done a lot of testing. If you have over 100MH/s and greater patience than a 3 year old, you should SOLO. (eth just isn't made for pool mining with it's crazy fast blocks)

No trust needed in pool operators (hacks, hiding blocks, hidden fees, human error, etc)

Much funner than mining on a pool.

In an ideal world, your solo miner would work with this solo proxy because of the added statistics it provides. Not sure I'd solo without it.

So, I ran 500MH/s on nano/supr in dual mode over night. Love your miner. Switching back to solo, though. Now I await your solo version to switch my 2GH/s over to your miner.

I was posting a few same phrases in the thread about advantages also. Totally agree with you.

[revelacaogr]

Can the miner be configured to work with ethermine.org/

me too...all good

[Prelude]

Glad to see that there are quite a few people wanting solo mining ability. Hopefully that bumps up priority for Claymore! I'm sure there are quite a few GH/s worth of miners out there that would be happy to pay the 2% fee to use his superior miner solo ETH pool DCR mode.

[bensam1231]

Still no comment on Nvidia OCL support?

Don't hate the brand, hate the coins.

[madmartyk]

Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks

[Cyberclones]

Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks

thDcrMiner64.exe -dbg 1 -esm 1 -epool us1.ethermine.org:4444 -ewal walletaddress.workername -epsw x

[Alex822]

v 1.2
important for R9 290/X 390/X, tested at 3x290.
Consumption as compared to ether only above -20%, cards temperature- 5%.
eth 0% rejected, dcr 5% (2 hour)
                 
                              profit for 1 day:

• dcri 20   eth 93      dcr 930     eth 9.7  $    dcr 1.258 $ = 10.958$

• dcri 30   eth 91.6   dcr 1373    eth 9.56 $   dcr 1.912 $ = 11.472$

• dcri 40   eth 87.7   dcr 1755    eth 9.15 $   dcr 2.438 $ = 11.588$

• dcri 50   eth 82.8   dcr 2070    eth 8.64 $   dcr 2.876 $ = 11.516$

• dcri 60   eth 77.9   dcr 2337    eth 8.13 $   dcr 3.255 $ = 11.385$

• dcri 100  eth 62     dcr 3103    eth 6.47 $   dcr 4.321 $ = 10.791$

$ figures may vary due to different counting different calculators

He was counting on the exchange rate:
1 eth -8.5$
1 dcr -1.5$

[Tacalt]

I am using the 1.2 version now. For the old version such as 1.0, I got lots of invalid shares. I change the intensity to 15 instead of 16 in Eth mining. Is that the intended function of the intensity?

[madmartyk]

Can the miner be configured to work with ethermine.org/

Sure, i'm using it on ether mine.org

works fine!

Can you paste your cmd file?  Do you remove the password cmd?  I couldn't get it to work

Thanks

thDcrMiner64.exe -dbg 1 -esm 1 -epool us1.ethermine.org:4444 -ewal walletaddress.workername -epsw x

Seems to be working, takes a while for them to show up..  Thanks!!

[WhyMe]

Testing on 4 280x @1050/1500
dcri 25

After 2 hours :
~79.5M on ETH + ~990M on DCR
0 rejected on ETH, ~14% rejected on DCR

~100w more at wall ( 1035w )

With official ETH miner, i'm at ~81-82M

See more after night.

17.4% rejected after 11h30 running ...
Not sure it's a good deal finally.

Better with changing suprnova port for DCR.
7.69% rejected after 45mn.

[revelacaogr]

I am using the 1.2 version now. For the old version such as 1.0, I got lots of invalid shares. I change the intensity to 15 instead of 16 in Eth mining. Is that the intended function of the intensity?

eth -intensity  15 rejects 0

dcr -intensity 20

dcr diff 64 supr rejects 0

i think its about balance between the intensitys....

and ofcorse diff 64

[chup]

1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.

Please make choice of restarting whole computer. When GPU hangs (repeating exactly same hashrate for 3+ times) and I restart miner, GPU that was hanging starts hashing with exactly half speed. GPU reset via TRIXX has no effect. If I reboot, than everything is normal again. Thx.

[DaveyJones]

Miner in the dough a little more than a day. It's okay for now. Over time, fading farm name on the pool. Usually after work to the author.
Supernova and stable work https: //dcr.maxminers.net and https://pool.mn/dcr. Less mistakes.

If you mean, that the miner suddenly stops sending worker name, then I confirm. Just saw this. It should be rig1 and rig2. But actually looks like an empty name.

I confirm this also.

Not even just dropping workername .... could even get the shares to my balance... even though miner said he is happely sending shares ... claymore pls fix this... restarting the client here and than cannot be the solution

[Claymore]

v2.0 with Stratum for Decred and many improvements/fixes wil be available within 24 hours.

[bensam1231]

v2.0 with Stratum for Decred and many improvements/fixes wil be available within 24 hours.

Features like Nvidia support? :O

[Gagana]

1. It seems GPU thread hangs, so its speed is not updated. I will add timestamp on latest speed value and miner will show "0" speed if that time is too old. Also I will add watchdog for miner autorestart.

Please make choice of restarting whole computer. When GPU hangs (repeating exactly same hashrate for 3+ times) and I restart miner, GPU that was hanging starts hashing with exactly half speed. GPU reset via TRIXX has no effect. If I reboot, than everything is normal again. Thx.

+1 Sometimes just restarting doesn't help. It could be an option

-forcereboot X

X - number of attempts to restart the thread with no effect. If X=0 then "never"

[igorwhite]

Hello Claymore.
Planned version for Linux?
Best Regards