Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[_javi_]

may someone post 15.12 dll files for OpenCL ? thanks

[1713946023]

1713946023

[1713946023]

1713946023

[kanoptx]

hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred! 

[Claymore]

hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred! 

You can mine expanse and decred, check OP or readme file:

...
Ethereum forks mining:

   EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1
...

Just set your address add decred parameters to this sample command line.

[hashine]

Claymore, thanks for nice work, can you add power limit option?

[kanoptx]

hey claymore, could you make one of these for decred and expanse? it would be cool and it should work, right?

This miner works like a charm. I dont mind the fees at all since it increased my hashrate by more than 3% without counting decred! 

You can mine expanse and decred, check OP or readme file:

...
Ethereum forks mining:

   EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1
...

Just set your address add decred parameters to this sample command line.

oh! sorry  didn't see it.

thank you for this kickass miner

[revelacaogr]

Recently i got on my all pc and all ver of miner on different pools

Code:

Stratum - Cannot connect  to dcr.suprnova.cc port 2252
 DCR: Stratum - Failed to connect, retry in 20 sec...

Code:

Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

and

Code:

DCR: Job timeout, disconnect, retry in 20 sec...

ETH with ethermine pool is ok!

Code:

 DCR: Stratum - connecting to 'dcr.pool.mn' <136.243.50.159> port 4800
ETH: 04/21/16-14:13:42 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.801 Mh/s, Total Shares: 115, Rejected: 0, Time: 04:36
ETH: GPU80 28.801 Mh/s
 DCR - Total Speed: 792.021 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.021 Mh/s
ETH: 04/21/16-14:13:57 - SHARE FOUND - (GPU 0)
ETH: Share accepted!
ETH: 04/21/16-14:14:00 - New job (target 0x0000000112e0be82) from eu1.ethermine
org:4444
ETH - Total Speed: 28.832 Mh/s, Total Shares: 116, Rejected: 0, Time: 04:36
ETH: GPU0 28.832 Mh/s
 DCR - Total Speed: 792.884 Mh/s, Total Shares: 1063, Rejected: 0
 DCR: GPU0 792.884 Mh/s
Stratum - Cannot connect  to dcr.pool.mn port 4800
 DCR: Stratum - Failed to connect, retry in 20 sec...

it trying to connect and then it show this error. All of this working a few hours ago, i even did.t touching my miners.

any news???

[revelacaogr]

pool.mn works now with stratum....

[revelacaogr]

suprnova also...

[sam1]

I connected to http://dcr.pool.mn:4723 when it was problems with Stratum and got bigger hashrate and less rejected shares. So, I'm not confident in need to use stratum again

[revelacaogr]

for me its the oposite...
+/-10% rejects without stratum

[sam1]

for me its the oposite...
+/-10% rejects without stratum

And with? I have 5% without and little bit more with

[Realetim]

I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.

.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart 

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.

[revelacaogr]

BTC

for me its the oposite...
+/-10% rejects without stratum

And with? I have 5% without and little bit more with

i mine dcr for 1/2 hour with 0 % rejects

but the normal for me (( beforE DDOS )) was 2-2.5% rejects (( dcr )

[citronick]

what the meaning of "--farm-recheck 600" again?

Note: I googled it but couldn't find a good answer - any experts out there?

anyone can help me understand this "--farm-recheck" ?

[Claymore]

I tried to use -wd 1, but can't make it to close the miner
tried -r -1
tried -r 0
When I mistype pool name (simulating dns /connectivity problem) it just keeps retrying to connect every 20sec, won't close the miner

My miner does not close. It will hang the system. So I use -wd 0 to disable the watchdog, and -r -1 not to restart.

.
+1 , after ver. 3.0 i found my rig 2 times freezed after a crash, i will test with -wd 0 and -r -1 now

+1 same here windows totally freezes and crash sometime i have no unplug it to restart 

When GPU fails, often Windows cannot work properly anymore and often it cannot even reboot normally.

In your old miner, 1.0 to 2.0, when the one GPU hang, the mining can still continue in other GPUs.

Disable watchdog: "-wd 0" if you want to continue mining if some GPU failed.

[sam1]

anyone can help me understand this "--farm-recheck" ?

Check for new task every x.xxx seconds

[shacky]

@Claymore

Thanks for this kind of software!!!

I want to know if it posible to disable one GPU for mining, for example: I wan to mine with GPU 1,2,3. And exclude the GPU 0.

Thanks

[qqqq]

So what it was ? DDOS ? I mean stratum error on few pools ?

[Maxikosw]

I take my word back. This newer version is mutch better. Only thing that i miss is failover servers.

[Maxikosw]

@Claymore

Thanks for this kind of software!!!

I want to know if it posible to disable one GPU for mining, for example: I wan to mine with GPU 1,2,3. And exclude the GPU 0.

Thanks

you just dont put that 0 on the list so its not mining on number 0. like -di 123