Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[totikk]

I'am on version 3.2 And I use stratum.
And I see this on other Decred miners((
http://i.piccy.info/i9/d9c9db201818a09002342e5a8a92bf4b/1461335864/151726/1027577/Snymok.jpg

[1713520249]

1713520249

[citronick]

v3.2 report

5 x MSI R9-390 with MSI Afterburner settings: MV: -100v, CC: 1015Mhz, MC: 1500Mhz
Crimson 15.12 / Win8.1 / Celeron 1840 / ASrock H81-BTC / 8GB RAM / 16GB Windows Virtual Memory

Runtime: 3 hours

ETH, 149.6 Mh/s (29.9Mh/s per card). 0 Rejects @ ethpool.org
DCR, 2244 Mh/s (448.8Mh/s per card). 1+% Rejects @ zpool.ca

Very big improvements on DCR rejects reduction, from 8-9% to 1-2%

Great work Mr. Claymore. Cant wait for the solo mining version.

[merc84]

-epsw x seems to set worker name to x for dwarfpool, if i change this all eth shares are rejected is it possible to set different worker name for different rigs, as sent hashrate only displays for 1/2 rigs.

[citronick]

-epsw x seems to set worker name to x for dwarfpool, if i change this all eth shares are rejected is it possible to set different worker name for different rigs, as sent hashrate only displays for 1/2 rigs.

use -eworker <your worker name> -epsw x -esm 0

[knobson]

Pool returned error #56.
 DCR: Failed to check work on pool, retry in 20 sec...

[Pustul]

For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

[citronick]

Pool returned error #56.
 DCR: Failed to check work on pool, retry in 20 sec...

try removing the -esm 0, and let the dualminer do auto detect

[melloyellow]

Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

[minerkin]

I use my own eth-proxy. with ethminer, the syntax to connect to my proxy is:

ethminer -G -F http://127.0.0.1:8080/rig1

How do I connect to my proxy and assign a worker name for ETH side of the miner?

[dominuspro]

Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

[gami82]

I use the miner v3.2 on coinotron for testing.

EthDcrMiner64.exe -mode 1 -epool coinotron.com:3344 -ewal user.pass -esm 2 -epsw x -dbg -1 -allpools 1

2 questions:
1. I get a message shortly after start bat: "CANNOT Parse JSON!" Is this a warning or an error?
2. Is "-allpools 1" necessary?

[Walrusbonzo]

For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

[Flomess]

I am using "standard" settings for my 7970

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)

[avirdoz]

I am using "standard" settings for my 7970

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)

What clocks are you using? For stock it's normal h/r.

[Flomess]

I am using "standard" settings for my 7970

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


And getting about 19.7 Mh/s on EHT (which is fine) but only 295 Mh/s on DCR, which is less than a fourth of what i could get solo mining DCR.
Already downgraded to 15.12 drivers.
What could it be? (i'm pretty noobish at mining)

What clocks are you using? For stock it's normal h/r.

Oh; i thought i could get my standard DCR hash (about 1.3 Gh/s) PLUS my standard ETH hash. I guess it whould have been too good to be true 
Stock clocks yep

[madmartyk]

Is anybody getting paid what the calculator's say you should get paid?  I am definitely not.  If you are, which calculators and pools are you using?

I'm facing the same bullshit on ethermine... The displayed hashrate(poolside 76Mh) is nice and smooth, the calculated earning(pool calc) is a bit above 1eth/24h. I have checked it quite often in the last 4 days and the actual revenue is lower than it should be.
I should get the payment each day a bit earlier but those are the facts:
Thu Apr 21 2016 14:52:58 GMT+0200 (CEST)
Wed Apr 20 2016 12:47:05 GMT+0200 (CEST)
Tue Apr 19 2016 09:42:50 GMT+0200 (CEST)
Mon Apr 18 2016 07:51:57 GMT+0200 (CEST


I know those are the pools... But no way of going solo below 500Mh.

I have about 70Mh and show just below 1 ETH /Day that is what I have been getting.

[Pustul]

For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

With which miner settings ? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.

[Walrusbonzo]

For anyone who is interested in knowing how to get the dlls from any driver version. Download the specific driver you want the dll's for and start the install, after it has finished extracting select cancel, this will stop the install but the contents of the driver has already been unpacked. Then look for C:\AMD\Radeon-Crimson-15.12-With-DOTNet45-Win7-64Bit\Packages\Drivers\Display\W76A_INF\B297238
Here i have used 15.12 as an example but u get the idea

Thank you for the info! But how do you know if it has worked? I have same exact hashing speed with 15.12 dlls than I had with the installed 16.1.1 catalyst.

Btw, I've got 18.5 MH/s with a 7970, is it ok or is there some parameters I could try to up it a bit?

23mh/s is possible with 7970.

But be prepared to overclock it to 1100/1700MHz

With which miner settings ? I used to oc it to 1200-1600 for scrypt back in the day but it doesn't seem to affect eth that much.

Clock speeds make a big difference on Eth, especially RAM. But I have also used a hex editor to change the RAM timings on my GFX card ROM. That helps a lot too. On my 7970, I got 2mh/s just from changing the RAM timings.

Here is my miner settings, with Cat 16.3.2

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.nanopool.org:9999 -ewal 0x9c4545befe9bfec17ffcdfbebe34a7ecc80e9165 -epsw x -eworker Main -etha 1,1,1 -ethi 16,16,4 -wd 1 -mode 1 -r 0 -dbg -1

I use intensity of 4 on my display card so as not to make my PC unusable

[Termie]

finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?

[sam1]

finally it runs with coinotron.
But after 1:04h run time the miner finds instead of green "share found!" only white "outdated share found - skip"
what does this mean?

Please, post here bat file to Coinotrone