Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[gennadiv]

friends I often see that GPU #1 is Wrong share. If you see this warning often, make sure that You are not
too hard to overclock it! or GPU #0 what the error is

[chronek]

friends I often see that GPU #1 is Wrong share. If you see this warning often, make sure that You are not
too hard to overclock it! or GPU #0 what the error is

5x sapphire rx480 4gb 3104/1900, 0 memory gpu errors , eth+lbc, lbry 69% wrong shares

[xeridea]

Having extremely high rejects on DCR Suprnova.  Like 99%, usually gets better after a bit, but getting worse. If it gets better, it goes to ~1% rejects until I restart miner.  Anyone else having terrible issues?  Happens on most rigs.  Cards are 100% stable, never crash, Eth rejects are rare.

[Pennywis3]

I get some rejects from Decred too, but nothing too bad.

Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees 

Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...

[xeridea]

I get some rejects from Decred too, but nothing too bad.

Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees 

Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...

I switched to dcr.coinmine.pl now getting 0.00% rejects, across 29 cards. suprnova dcr pools seems crap I guess.

[Eyedol-X]

@Claymore

Will there be an update for this or response to this? Thanks.

NiceHash Miner ^v1.7.4.3

Download:
https://www.nicehash.com/?p=nhmintro

This is a minor bug-fix release and minor feature updates.

You all need to add Claymore as a 3rd party ETH miner option, it works fine and doesn't have all these driver issues you're having with the ETH Miner and SGMiner.

It is not up to us.
Ask Claymore to modify his miner so it will fit the NiceHash Miner.

[hoze]

I have a question for RX 470 and 480 users

What power consumption do you guys get with what hash rates?

Have you read the forum ? there is alot of post already referencing those numbers.

I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link.

470 runs around 26@120
480 runs around 29@135

Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.

Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)
 
ETH - Total Speed: 114.433 Mh/s, Total Shares: 5248, Rejected: 0, Time: 26:11
ETH: GPU0 28.610 Mh/s, GPU1 28.635 Mh/s, GPU2 28.577 Mh/s, GPU3 28.612 Mh/s
ETH: 01/30/17-22:19:46 - SHARE FOUND - (GPU 3)
ETH: Share accepted (78 ms)!

[wacko]

Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)

That's probably Samsung memory you've got there? Those can usually overclock to 2100+ with 1750 strap timings. But most 470s, as far as I'm aware, don't use Samsung chips but rather Hynix (not bad as well) or Elpida (those are a bit worse I think?).

[ronald88]

Why my miner wont connect to eu1-etc.ethermine.org help

[hoze]

Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)

That's probably Samsung memory you've got there? Those can usually overclock to 2100+ with 1750 strap timings. But most 470s, as far as I'm aware, don't use Samsung chips but rather Hynix (not bad as well) or Elpida (those are a bit worse I think?).

Elpida memory gpu 1122 / mem 2020 core voltage -96mV . I got with samsung memory too. I will test them in few day...

[Pennywis3]

I get some rejects from Decred too, but nothing too bad.

Whats bad is the temps of the cards... Can't run it on 7950's as they go over 80 degrees  

Any advice here? tried lowering the clocks to 800Mhz and memory to 1200 Mhz, lowered voltages but still geting too hot...

I switched to dcr.coinmine.pl now getting 0.00% rejects, across 29 cards. suprnova dcr pools seems crap I guess.

I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.

Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.

[wacko]

Elpida memory gpu 1122 / mem 2020 core voltage -96mV . I got with samsung memory too. I will test them in few day...

At 2020 memclock, which timings do you use? From which strap - 1500, 1625, 1750?

[vapourminer]

Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)

That's probably Samsung memory you've got there? Those can usually overclock to 2100+ with 1750 strap timings. But most 470s, as far as I'm aware, don't use Samsung chips but rather Hynix (not bad as well) or Elpida (those are a bit worse I think?).

my powercolor red dragon 470/4 will also do 28+. does 28.5-28.8 on eth with 1750 straps @ 1300/2100 -75mv  -i 8. runs 24/7 with no problems. about a month ago it could hit the low 29s, guess the epoch increase slowed it down a touch.

seems to be a samsung thing?

[mafaz]

I have a question for RX 470 and 480 users

What power consumption do you guys get with what hash rates?

Have you read the forum ? there is alot of post already referencing those numbers.

I read plenty of post about hash rates but power draw is not so consistent. Problem when searching these terms even with quotations is it only requires the words to appear anywhere on the page, even if one is in a post and the other is a related link.

470 runs around 26@120
480 runs around 29@135

Theoretically its possible to run 470 at 28, but it requires hardcore mem OC and not many cards can handle it 24/7.

Without any problem, withoutn crash. Sapphire RX470 4GB Nitro+ (moded bios)
 
ETH - Total Speed: 114.433 Mh/s, Total Shares: 5248, Rejected: 0, Time: 26:11
ETH: GPU0 28.610 Mh/s, GPU1 28.635 Mh/s, GPU2 28.577 Mh/s, GPU3 28.612 Mh/s
ETH: 01/30/17-22:19:46 - SHARE FOUND - (GPU 3)
ETH: Share accepted (78 ms)!

mind to share the bios and afterburner settings or whichever u use? and memory type... elpida? hynix? samsung?

[matmator]

Hello

How do the following commands work with claymore?

I would like that my card starts with the voltages following 950mv and the fans has 50% minimum, I therefore apologize these commands in the .bat

But it does not work.

-cvddc 950 -mvddc 900 -fanmin 50

an idea ?

thank you

[hoze]

Elpida memory gpu 1122 / mem 2020 core voltage -96mV . I got with samsung memory too. I will test them in few day...

At 2020 memclock, which timings do you use? From which strap - 1500, 1625, 1750?

1500

[rawbot]

Can anybody tell me what the best crimson driver version is to use for Windows 10 for a 6 gpu rig (Sapphire RX 470 8gb cards)?  I think 16.11.5 beta is installed right now

Also what is the best mining pool to use with Claymore?

[mafaz]

Hi i got 6 elpida 4 hynix 1 samsung rx 470
Rig with 3 elpida 3 hynix ones is running great.
Rig 2 with 3 elpida 1 hynix 1 samsung..... one gpu gets a high load of rejected shares.... might it be some faulty gpu or what might be the reason for it? I use same afterburner settings for all of them on both rigs and only 1 gpu is having problems...

[Encho]

I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.

Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.

Regarding those RX, set the core clocks to 1050, thank me tomorrow

[Pennywis3]

I dont mind a few % rejects, its realy a small amount.
The temperatures are the problem, i can get the RX series cards to 70 - 74 degrees, which is not that bad, but the 79xx series just goes 80+ hehe.

Can anyone tell me what the degrees are on 280x cards for istance? Im guessing they overheat to, since its basicly at 7970 repacked.

Regarding those RX, set the core clocks to 1050, thank me tomorrow

Thanks for the tip, im trying it out.

So far, ETH drops from 24Mh/s to 20MH/s  

Anyway, im geting bad results on SApphire Nitro+ RX 480 4GB
About 24MH/s ETH + 1.1Gh/s Decred is the best i can do at 1300/2000
Kinda sux, seeing people are geting 28Mh/s ETH on 470's.
Even if i tune down Decred to oblivion, ETH won't go past 24.5Mh/s 
Noobs shouldn't mine hehe.