Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Pair]

Hey,

I am having the issue that Claymore doesnt detect my GTX 970 GPUs.

I already tried to change to Driver 352.84 but still having this issue.

OS is Win 10

[1713592841]

1713592841

[Claymore]

There is an interesting optimization for Nvidia Cuda (esp. 1060 cards) being discussed here:

https://github.com/ethereum-mining/ethminer/pull/18

Maybe something for Claymore as well.

You are sixth or seventh here. Try to read thread before posting something

It will take me a few days to check it and release an update.
Firstly, I need to buy 1060 card since I have 1080 and 1070 only, 1060 was not good for mining in past so I did not buy it and did not check it.
Then I will try to get higher speed in dual mining for these cards.

I am having some problems with the temp/fan monitor, v9.5 shows only 3 out of 4 cards temp/fan (gpu0, gpu1, gpu2).
After updated to v9.6, it shows gpu0, gpu2, gpu3. Any solution to show all 4 cards temp/fan?
GPU-z shows all 4 cards stats without problem.

May be disable crossfire? If it is not the case, I need more info about GPUs.

[ckh]

I am having some problems with the temp/fan monitor, v9.5 shows only 3 out of 4 cards temp/fan (gpu0, gpu1, gpu2).
After updated to v9.6, it shows gpu0, gpu2, gpu3. Any solution to show all 4 cards temp/fan?
GPU-z shows all 4 cards stats without problem.

May be disable crossfire? If it is not the case, I need more info about GPUs.

[/quote]

Didn't realize crossfire is not disable, problem solved. Thanks a lot!

[Claymore]

Claymore,
Can you verify if you are in talk with AMD developers to get this bug thrashing issue fixed? While your at it, how about getting it fixed on the R9 280X also, I miss the 28MH/s speeds I used to get with Tahiti GPUs.

Yes I can confirm it, but it does not mean that this problem will be fixed.

[Coin++]

Thank you for this new version, particulary for Linux users :-).

Are you thinking about some optimisation for nVidia users (for example because DAG limitations for AMD users) ?

[Claymore]

I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube.
So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.

[Bojcha]

I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube.
So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.

Where's llink?

[NoOneLt]

Hey guys, help to troubleshoot, on ethermine.org my ETH rate is well below reported though SIA is OK. Should i switch pool or look somwhere into my system? Win 10 latest version, latest drivers, on wifi:


WiFir esults:

Anyone can help?

[Msobh]

I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube.
So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.

Where's llink?

You can find that in this video https://www.youtube.com/watch?v=l3XOtQtFKSQ          >> 15:40
Bits Be Trippin' channel

so can anyone test sgminer  for epoch 140 and compare it with claymore

[Bojcha]

I found some messages that slowdown for bigger DAGs is related to my miner only, and sgminer is ok. I would like to see some proofs instead of rumors from youtube.
So if someone can post the command line for sgminer for some future epoch (e.g. #150 or higher) here and the link to sgminer binary that should be used for tests, it would be good and we all could confirm it.

Where's llink?

You can find that in this video https://www.youtube.com/watch?v=l3XOtQtFKSQ
Bits Be Trippin' channel

so can anyone test sgminer  for epoch 140 and compare it with claymore

No i dont see it.

[justchil]

Good update for Ethman   Solved issues I was having!

I still have the little quirk with the webpage -- if you have a black background this text is black too... so you have to highlight it to make it visible.


Total Ethereum Hashrate: 986.32 MH/s, 269/0 (0.00%)
Total Decred Hashrate: 0.0 MH/s, 0/0 (0.00%)
Total Online Miners: 9
Total Working GPUs: 33

[Beroxull]

I've read the guide so I understand the basic premises of the command switches. I really need some examples of command line switches of different GPU Frankenstein setups so I can emulate and tweak what I need.

Does some sort of brain dump exist out there of something like this?

[ciripel1289]

My question is about the Dpools.txt back pools file.
I want to mine UBQ as main coin from a main pool and i have also a second pool as backup. this is set up.
I want to mine sia as main second coin from a pool. If that pool is down i want to mine decred instead from the backup pool.
I can't make the dpools.txt file to work like this.

Normally i can set up the -dcri command in the config.txt file and also the -dcoin command.
But i want to set up 2 pools as a backup. First pool to be a Decred pool and the second one to be a Siacoin pool.
Can i make a file dpools.txt like this?

POOL: stratum+tcp://sia-eu1.nanopool.org:7777, WALLET: <ADRESS>/<USER>/<mail>, DCOIN: sia, DCRI: 17
POOL: stratum+tcp://dcr.suprnova.cc:3252, WALLET: user.1, PSW: 1, DCRI: 28


Seems to not be accepted the DCOIN and DCRI command in the dpools.txt.
So due to this i guess it is only possible to mine only one time of second coin and to set up 2 pools for the same coin.
Is this correct or there is another workaround?

[Killcycle]

This is, how i Looks like for me with -dcri 17

ETH: 06/27/17-17:29:36 - New job from eu1.nanopool.org:9999
ETH - Total Speed: 24.412 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:15
ETH: GPU0 24.412 Mh/s
 SC - Total Speed: 414.996 Mh/s, Total Shares: 6, Rejected: 0
 SC: GPU0 414.996 Mh/s

GPU0 t=88C fan=69%

Great or not, or what do you think?

[joosep]

This is, how i Looks like for me with -dcri 17

ETH: 06/27/17-17:29:36 - New job from eu1.nanopool.org:9999
ETH - Total Speed: 24.412 Mh/s, Total Shares: 4, Rejected: 0, Time: 00:15
ETH: GPU0 24.412 Mh/s
 SC - Total Speed: 414.996 Mh/s, Total Shares: 6, Rejected: 0
 SC: GPU0 414.996 Mh/s

GPU0 t=88C fan=69%

Great or not, or what do you think?

Temperature is too high, I keep at least under 75C.

[Bob_chemist]

@Claymore

I've found a bug in EthMan 3.3:
Right clicking on rig turned off (red or grey) and choosing "Edit config.txt" causes crash of EthMan. Sometimes is needed to do it twice.

[goro2030]

Hi guys! I'm using v9.6, and have 2 identical computers, with exactly the same GPU ( Nvidia 1050 TI , 4GB ) ... one is performing at 11 MH/S, and the other at 2 MH/S . The one at 2MH is also showing a 90% CPU usage when running ... I'm mining ETH+PASC .

Any quick guidance on where to start looking for the problem on the one running at just 2 MH/S?

[ciripel1289]

Hi guys! I'm using v9.6, and have 2 identical computers, with exactly the same GPU ( Nvidia 1050 TI , 4GB ) ... one is performing at 11 MH/S, and the other at 2 MH/S . The one at 2MH is also showing a 90% CPU usage when running ... I'm mining ETH+PASC .

Any quick guidance on where to start looking for the problem on the one running at just 2 MH/S?

What Hash u have on it when u mine only ETH?
If it is aprox 11 then try using the -dcri command and lower the value... use - in CLI.

[goro2030]

Hi guys! I'm using v9.6, and have 2 identical computers, with exactly the same GPU ( Nvidia 1050 TI , 4GB ) ... one is performing at 11 MH/S, and the other at 2 MH/S . The one at 2MH is also showing a 90% CPU usage when running ... I'm mining ETH+PASC .

Any quick guidance on where to start looking for the problem on the one running at just 2 MH/S?

What Hash u have on it when u mine only ETH?
If it is aprox 11 then try using the -dcri command and lower the value... use - in CLI.

Thanks for the quick reply! Nope, no luck... if just mining ETH, it's still at 2 MH/S

Any other suggestions to check?

[reb0rn21]

fixed ethermine for 1060, tested on 5x 1070 with memory set to 2400mhz