Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[jackallman]

When using Claymore miner one of my GTX 970 cards runs slower than the other at 16mh/s rather than at 22 mh/s. I am running Windows 7 with the latest drivers. Whats weird is that when i restart the miner, the other card may become the slow one and the other the fast one. When I run ethminer i get 41 mh/s suggesting both cards are running at a good speed. Anyone have any ideas as i want to dual mine?

[1713973896]

1713973896

[1713973896]

1713973896

[1713973896]

1713973896

[Yamakoro]

How it can be?

One 280x Gigabyte - 80 mh.

https://vimeo.com/223814452

https://www.dropbox.com/sh/6hnnv7b1829lurf/AAB-Vpdx4AwCKQ_qOIS6kmg2a?dl=0

I've attach a couple of files with screenshots and log files with reports for 6-7 hours.

[thameur]

goodbye DAG  

I found solution to have full hashrate with Claymore, Strix R9 390 @ 32.3 Mh/s in ETH temperature 70°C

[ReaperCaution]

I added a couple Nvidia GPU's to my rig and now the temp/fan output line doesn't parse correctly and then it crashes my monitoring app when I go to use it.

It doesn't show the info for GPU0 (AMD).  It shows "; GPU1 t-56 fan-40%, GPU2 t-57 fan-40%"  (just the Nvidia's)

I've search around and haven't found an answer.  Any ideas?

I shifted my AMD card to mine Zcash and put the 2 NVIDIA's on Claymore's Dual.  The temp/fan info now shows correctly with the 2 GPU's and no longer crashes the monitoring app.

How can I add back in my AMD card to Claymores Dual and get it to output correctly?

[adaseb]

How it can be?

One 280x Gigabyte - 80 mh.

https://vimeo.com/223814452

https://www.dropbox.com/sh/6hnnv7b1829lurf/AAB-Vpdx4AwCKQ_qOIS6kmg2a?dl=0

I've attach a couple of files with screenshots and log files with reports for 6-7 hours.

Your memory straps are messed up. Your real hashrate is like 10mh/s. I had this happen also.

[xxoanser]

goodbye DAG  

I found solution to have full hashrate with Claymore, Strix R9 390 @ 32.3 Mh/s in ETH temperature 70°C

¿What is the solution? :O 

[nicog5]

goodbye DAG  

I found solution to have full hashrate with Claymore, Strix R9 390 @ 32.3 Mh/s in ETH temperature 70°C

Please, write your solution! 

[boysie]

Not working with Vega :9 using 9.6

21:00:54:687   19c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:00:54:689   19c8   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6      º
21:00:54:691   19c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:00:54:694   19c8   
21:00:54:897   19c8   ETH: 1 pool is specified
21:00:54:900   19c8   Main Ethereum pool is eu1-etc.ethermine.org:4444
21:00:54:903   19c8   DCR: 0 pool is specified
21:00:54:966   19c8   OpenCL platform: AMD Accelerated Parallel Processing
21:00:54:969   19c8   OpenCL initializing...

21:00:54:973   19c8   AMD Cards available: 1
21:00:54:976   19c8   GPU #0: gfx900, 16192 MB available, 64 compute units
21:00:54:979   19c8   POOL/SOLO version
21:00:54:981   19c8   b365
21:00:54:983   19c8   Platform: Windows
21:00:55:030   19c8   start building OpenCL program for GPU 0...
21:00:55:055   19c8   done
21:00:55:160   19c8   Error: AMD HSA Code Object loading failed.

[fcaldas]

Not working with Vega :9 using 9.6

21:00:54:687   19c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:00:54:689   19c8   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6      º
21:00:54:691   19c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:00:54:694   19c8   
21:00:54:897   19c8   ETH: 1 pool is specified
21:00:54:900   19c8   Main Ethereum pool is eu1-etc.ethermine.org:4444
21:00:54:903   19c8   DCR: 0 pool is specified
21:00:54:966   19c8   OpenCL platform: AMD Accelerated Parallel Processing
21:00:54:969   19c8   OpenCL initializing...

21:00:54:973   19c8   AMD Cards available: 1
21:00:54:976   19c8   GPU #0: gfx900, 16192 MB available, 64 compute units
21:00:54:979   19c8   POOL/SOLO version
21:00:54:981   19c8   b365
21:00:54:983   19c8   Platform: Windows
21:00:55:030   19c8   start building OpenCL program for GPU 0...
21:00:55:055   19c8   done
21:00:55:160   19c8   Error: AMD HSA Code Object loading failed.

oh wow, nice. make sure you let us know the hashrate when this is fixed

[fredeq]

boysie is this professional vega or RX one?

[tumjuk]

why my Mh/s drop so much.

my card is 1060 6gb.

https://prnt.sc/fq8c76

ETH is 21 Mh/s is normal.
LBC is 13 Mh/s is abnormal because i have 190 Mh/s per card if i run only LBC.

My code.
ethdcrminer64.exe -epool eth.suprnova.cc:5005 -ewal tumjuk.eth -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal tumjuk.lbry -dpsw x -dcoin lbry -allpools 1

sorry for my english language.

regards,

[burgla7711]

So i know this post is for Claymore miner, but i was having such issues, I moved to nicehash, does anyone else on here use nicehash with multiple gpus. It benchmarks all the algo's fine. When i go to start, it starts mining and then 20-30 min into mining the computer locks up. It doesn't turn off , or give any error message. It just locks , no mouse or keyboard. I have to then hard shut down the pc, and start mining over and it does it again. I don't know if it is certain algo's causing it or not, i tried most of them individually and it seems to do the same thing. I just want my rig mining already and i am having so many issues with the software configuration. any help is appreciated. Even if it is claymore code that will allow me to mine nicehash stratum links.

[jackbox]

So i know this post is for Claymore miner, but i was having such issues, I moved to nicehash, does anyone else on here use nicehash with multiple gpus. It benchmarks all the algo's fine. When i go to start, it starts mining and then 20-30 min into mining the computer locks up. It doesn't turn off , or give any error message. It just locks , no mouse or keyboard. I have to then hard shut down the pc, and start mining over and it does it again. I don't know if it is certain algo's causing it or not, i tried most of them individually and it seems to do the same thing. I just want my rig mining already and i am having so many issues with the software configuration. any help is appreciated. Even if it is claymore code that will allow me to mine nicehash stratum links.

When mining any Ethash coin Nicehash miner uses Claymore so you have accomplished nothing. It is just a shell running the typical mining software depending on coin being mined.

[notbatman]

oh, 16GB with 64 cores....

edit:

it's called the frontier edition and has some triangles on it, lol.

[Jpopple]

Ok so I have 2 x gtx 970s and 2 x gtx 1060s. Windows 10 how can I possibly run all four at the same time? They use two different video drivers?

[FFI2013]

I'm sure this has been asked before in the last 600 something pages but I keep seeing incorrect eth shares gpu 1 and 2 what exactly does this mean the submitted share count is off or is there a problem with those 2 gpus one is a 290 and the other 390 win 10 15.12 drivers thanks

[achalmersman]

Ok so I have 2 x gtx 970s and 2 x gtx 1060s. Windows 10 how can I possibly run all four at the same time? They use two different video drivers?

I'm a newb but to my knowledge you can't.  I started with a 970 and got it hashing 19 MH/s but was unable to use it and the 1070s I started buying.  I only have 10xx series cards in my windows machine now.  My Linux rig runs 1070s, 1060s and 1 970s all without any trouble however I cannot figure out how to overclock the 970 in Linux so its running around 18.5 MH/s.  But at least its running and I can control the fan speed.  The 10xx series cards all overclock via server-x settings without any problem

[xxoanser]

goodbye DAG  

I found solution to have full hashrate with Claymore, Strix R9 390 @ 32.3 Mh/s in ETH temperature 70°C

 

Share the solution please

[antonio2234]

I have problem with my 4x1070.
Nvidia Driver version: 368.81
Windows 10.
My virtual memory: Min 18,000 MB and max 25,000 on drive C (windows).

[boysie]

Not working with Vega :9 using 9.6

21:00:54:687   19c8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:00:54:689   19c8   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.6      º
21:00:54:691   19c8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:00:54:694   19c8   
21:00:54:897   19c8   ETH: 1 pool is specified
21:00:54:900   19c8   Main Ethereum pool is eu1-etc.ethermine.org:4444
21:00:54:903   19c8   DCR: 0 pool is specified
21:00:54:966   19c8   OpenCL platform: AMD Accelerated Parallel Processing
21:00:54:969   19c8   OpenCL initializing...

21:00:54:973   19c8   AMD Cards available: 1
21:00:54:976   19c8   GPU #0: gfx900, 16192 MB available, 64 compute units
21:00:54:979   19c8   POOL/SOLO version
21:00:54:981   19c8   b365
21:00:54:983   19c8   Platform: Windows
21:00:55:030   19c8   start building OpenCL program for GPU 0...
21:00:55:055   19c8   done
21:00:55:160   19c8   Error: AMD HSA Code Object loading failed.

So not a claymore issue looks like a windows driver issue with all openCL with the vega.

I've tried a lot of miners now and not 1 works, new OS, new mobo, so seems we are going to be a while before we get a proper working vega on windows.

Nice on AMD

Boysie

errors:

AMD Cards available: 1
GPU #0: gfx900, 16192 MB available, 64 compute units
POOL/SOLO version
Cannot build OpenCL program for GPU 0
GPU #0: set -etha as 0 (ETH algo for fast cards)
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'eu1-etc.ethermine.org' <94.23.45.111> port 4444
ETH: Stratum - Connected (eu1-etc.ethermine.org:4444)
ETH: Authorized
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management is enabled on port 4028

Setting DAG epoch #133...
Setting DAG epoch #133 for GPU0
Create GPU buffer for GPU0
GPU0, OpenCL error -48 (0) - cannot create DAG on GPU
GPU 0 failed
Setting DAG epoch #133 for GPU0
GPU0, OpenCL error -48 (0) - cannot create DAG on GPU