MonetaCoin
|
|
July 02, 2017, 06:26:10 PM |
|
Maybe its the new vs? Or is eth getting to difficult to dual mine?
|
|
|
|
vikeh
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 02, 2017, 06:43:44 PM |
|
I'm trying this miner for the first time and I'm getting these unstable Mh/s
ETH: 07/02/17-20:38:52 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 63.816 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:03 ETH: GPU0 5.487 Mh/s, GPU1 20.439 Mh/s, GPU2 5.204 Mh/s, GPU3 18.170 Mh/s, GPU4 9.374 Mh/s, GPU5 5.142 Mh/s
These should read minimum of 21Mh/s
I'm running windows 10 x64 G4400 CPU TB250-BTC v6 6 x 1060 GPUS Latest Nvidia Driver PSU Cougar 1050
Any help would be appreciated.
|
|
|
|
Vann
|
|
July 02, 2017, 06:59:04 PM |
|
I'm trying this miner for the first time and I'm getting these unstable Mh/s
ETH: 07/02/17-20:38:52 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 63.816 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:03 ETH: GPU0 5.487 Mh/s, GPU1 20.439 Mh/s, GPU2 5.204 Mh/s, GPU3 18.170 Mh/s, GPU4 9.374 Mh/s, GPU5 5.142 Mh/s
These should read minimum of 21Mh/s
I'm running windows 10 x64 G4400 CPU TB250-BTC v6 6 x 1060 GPUS Latest Nvidia Driver PSU Cougar 1050
Any help would be appreciated.
Make sure Windows 10 is updated to the latest version through Windows Update then uninstall the drivers in safe mode using DDU and reinstall the latest driver.
|
|
|
|
vikeh
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 02, 2017, 07:04:46 PM |
|
I'm trying this miner for the first time and I'm getting these unstable Mh/s
ETH: 07/02/17-20:38:52 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 63.816 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:03 ETH: GPU0 5.487 Mh/s, GPU1 20.439 Mh/s, GPU2 5.204 Mh/s, GPU3 18.170 Mh/s, GPU4 9.374 Mh/s, GPU5 5.142 Mh/s
These should read minimum of 21Mh/s
I'm running windows 10 x64 G4400 CPU TB250-BTC v6 6 x 1060 3GB GPUS Latest Nvidia Driver PSU Cougar 1050
Any help would be appreciated.
Make sure Windows 10 is updated to the latest version through Windows Update then uninstall the drivers in safe mode using DDU and reinstall the latest driver. It is updated. Just to provide more information, I unplugged all the GPUs and plugged them 1 by 1 and tested the miner for every card. All stable 21 Mh/s, when connected together starts the unstable Mh/s.
|
|
|
|
MinerosYV
Newbie
Offline
Activity: 72
Merit: 0
|
|
July 02, 2017, 08:18:47 PM |
|
I'm trying this miner for the first time and I'm getting these unstable Mh/s
ETH: 07/02/17-20:38:52 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 63.816 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:03 ETH: GPU0 5.487 Mh/s, GPU1 20.439 Mh/s, GPU2 5.204 Mh/s, GPU3 18.170 Mh/s, GPU4 9.374 Mh/s, GPU5 5.142 Mh/s
These should read minimum of 21Mh/s
I'm running windows 10 x64 G4400 CPU TB250-BTC v6 6 x 1060 3GB GPUS Latest Nvidia Driver PSU Cougar 1050
Any help would be appreciated.
Make sure Windows 10 is updated to the latest version through Windows Update then uninstall the drivers in safe mode using DDU and reinstall the latest driver. It is updated. Just to provide more information, I unplugged all the GPUs and plugged them 1 by 1 and tested the miner for every card. All stable 21 Mh/s, when connected together starts the unstable Mh/s. I read somewhere that new versions of windows are giving problems with more that 4 GPUs, they just don't like miners, got a 5 card rig that is giving me problems just after the last Windows 10 update.
|
|
|
|
vikeh
Newbie
Offline
Activity: 14
Merit: 0
|
|
July 02, 2017, 08:43:12 PM |
|
I'm trying this miner for the first time and I'm getting these unstable Mh/s
ETH: 07/02/17-20:38:52 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 63.816 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:03 ETH: GPU0 5.487 Mh/s, GPU1 20.439 Mh/s, GPU2 5.204 Mh/s, GPU3 18.170 Mh/s, GPU4 9.374 Mh/s, GPU5 5.142 Mh/s
These should read minimum of 21Mh/s
I'm running windows 10 x64 G4400 CPU TB250-BTC v6 6 x 1060 3GB GPUS Latest Nvidia Driver PSU Cougar 1050
Any help would be appreciated.
Make sure Windows 10 is updated to the latest version through Windows Update then uninstall the drivers in safe mode using DDU and reinstall the latest driver. It is updated. Just to provide more information, I unplugged all the GPUs and plugged them 1 by 1 and tested the miner for every card. All stable 21 Mh/s, when connected together starts the unstable Mh/s. I read somewhere that new versions of windows are giving problems with more that 4 GPUs, they just don't like miners, got a 5 card rig that is giving me problems just after the last Windows 10 update. I went back to an older version of the Nvidia drivers and is much better now. Will try and go further back to see if it keeps more stable.
|
|
|
|
Chipychop
Member
Offline
Activity: 91
Merit: 10
|
|
July 02, 2017, 08:50:39 PM |
|
hey there
I hope you can help me, I'm running EWBF's CUDA Zcash miner with my gtx 1080 ti but I also have a rx 480 on second pci-e slot, that I used for mining ethereum
So I wonder if it is possible to set up ony the rx 480 in claymore miner and force not to use 1080 ti? if that, how?
Thanks in advance
|
|
|
|
shvetsv
Newbie
Offline
Activity: 50
Merit: 0
|
|
July 02, 2017, 08:51:31 PM |
|
Claymore, please make new version with best optimize Nvidia card. Etherminer and nicehash miner give more hashrate than claymore. Nvidia 1060 make on claymore 23Mh, on Etherminer make 24. Nicehash miner also give 24 but working only with nicehash.
|
|
|
|
ozzy1926
|
|
July 02, 2017, 08:52:30 PM |
|
I was mining @40mh/s since today with cuda miner 2x980 untill today for 10 days but it dropped to 37 mh/s.Is this because difficulty raised ?
|
|
|
|
MonetaCoin
|
|
July 02, 2017, 09:01:45 PM |
|
So no one else has noticed freeze ups or extreme lag lately while dual mining on the latest vs of claymore? Is it the recent difficulty increase or new vs?
|
|
|
|
Munhenhos
Member
Offline
Activity: 72
Merit: 10
|
|
July 02, 2017, 09:10:02 PM |
|
hey there
I hope you can help me, I'm running EWBF's CUDA Zcash miner with my gtx 1080 ti but I also have a rx 480 on second pci-e slot, that I used for mining ethereum
So I wonder if it is possible to set up ony the rx 480 in claymore miner and force not to use 1080 ti? if that, how?
Thanks in advance
check readme.txt on claymore folder. there's info there showing how to do it.
|
|
|
|
Truthchanter
|
|
July 02, 2017, 09:27:53 PM |
|
I'm having a weird issue. Claymore just waits after it starts and says OpenCL initializing... then it lists the cards and just waits.
I used to be able to fix this by restarting claymore or restarting the computer but it's not helping anymore.. it just waits every time and won't mine.. Any ideas?
|
|
|
|
G1EthMiner
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 02, 2017, 09:30:05 PM |
|
I'm mining only ETH but for some reason it is also mining DCR. Is DCR being mined as a fee?
-epool us2.ethpool.org:3333 -ewal ETHAddress.RigName -epsw x -allpools 1
Is it really taking my config options or is it taking something that I'm not inputting? Where is that DCR info coming from? I want to solo mine. Thanks
|
|
|
|
Vann
|
|
July 02, 2017, 09:32:40 PM |
|
I'm having a weird issue. Claymore just waits after it starts and says OpenCL initializing... then it lists the cards and just waits.
I used to be able to fix this by restarting claymore or restarting the computer but it's not helping anymore.. it just waits every time and won't mine.. Any ideas?
Sounds like it could be hanging from too high of an overclock. Try backing down the core clock by 10 MHz and the memory clock by 50 MHz and see if it helps.
|
|
|
|
Vann
|
|
July 02, 2017, 09:34:07 PM |
|
I'm mining only ETH but for some reason it is also mining DCR. Is DCR being mined as a fee?
-epool us2.ethpool.org:3333 -ewal ETHAddress.RigName -epsw x -allpools 1
Is it really taking my config options or is it taking something that I'm not inputting? Where is that DCR info coming from? I want to solo mine. Thanks
You need to use -mode 1 if you don't want to dual mine.
|
|
|
|
Truthchanter
|
|
July 02, 2017, 09:44:11 PM |
|
I'm having a weird issue. Claymore just waits after it starts and says OpenCL initializing... then it lists the cards and just waits.
I used to be able to fix this by restarting claymore or restarting the computer but it's not helping anymore.. it just waits every time and won't mine.. Any ideas?
Sounds like it could be hanging from too high of an overclock. Try backing down the core clock by 10 MHz and the memory clock by 50 MHz and see if it helps. Thanks. I narrowed it down to 1 card but that card messes it up even at stock clocks/volts. I figured it out by trying just the first card using -di 0 and it actually loaded correctly and mined. Then tried -di 01 and it didn't work.. then I tried all but that 1.. -di 02345 and it worked! so it's 1 card in particular giving me and issue.. it's actually the same card that kept hanging every few days stopping the rig from mining. I'll have to check the riser and maybe try that specific card in another rig to see what's up
|
|
|
|
potatotda
Newbie
Offline
Activity: 27
Merit: 0
|
|
July 02, 2017, 09:52:01 PM |
|
Hi guys,
i need some help.
i have Sapphire nitro RX 580 8GB an a nice Bios mod wich runs on windows 10 brilliant. Unfortunately on Simple mining not so much because i can not adjust the voltage as well as in Windows.
i need to set one of those 2 Settings:
======================= setting 1 =====================
*1120 - Core Clock *2250 - Memory Clock *-96 Vol - Voltage at MSIafterburner *60% - FAN Speed
29.45-30.1 MH/s - Mining ETH 75-76 - Watts per card / GPU-Z and Msiafterburner ========================setting 2==================== *1130 - Core Clock *2080 - Memory Clock *-96 Vol - Voltage at MSIafterburner *70% - FAN Speed
30.1-30.04 MH/s - Mining ETH 75-77 - Watts per card / GPU-Z and Msiafterburner
SETTING THE CLOCKS for memory and core is clear ....... but how to set -96Vol ?
is it possible with -cvddc and -mvddc ??
THANK YOU IN ADVANCE !
REGARDS DANIEL
|
|
|
|
G1EthMiner
Newbie
Offline
Activity: 2
Merit: 0
|
|
July 02, 2017, 10:52:58 PM |
|
I'm mining only ETH but for some reason it is also mining DCR. Is DCR being mined as a fee?
-epool us2.ethpool.org:3333 -ewal ETHAddress.RigName -epsw x -allpools 1
Is it really taking my config options or is it taking something that I'm not inputting? Where is that DCR info coming from? I want to solo mine. Thanks
You need to use -mode 1 if you don't want to dual mine. Thank you!
|
|
|
|
Jpopple
Newbie
Offline
Activity: 27
Merit: 0
|
|
July 02, 2017, 11:05:16 PM |
|
Ok so after a couple days of troubleshooting finally got my first rig up. Im currently running 5 out of my 6 six gpu though.
I have a r9 380 x and a rx 480 I figured they would be compatible as I have run them alone. However if I both installed with driver 15.12 only the rx 380 works hashes and I get no temp or power reads on either. Than if I run it with the latest drivers like 17.1 they both work however the r9 380 hashes at 0. ANy suggestions on a cross compatibility driver?
|
|
|
|
Munhenhos
Member
Offline
Activity: 72
Merit: 10
|
|
July 02, 2017, 11:32:59 PM |
|
Hi guys,
i need some help.
i have Sapphire nitro RX 580 8GB an a nice Bios mod wich runs on windows 10 brilliant. Unfortunately on Simple mining not so much because i can not adjust the voltage as well as in Windows.
i need to set one of those 2 Settings:
======================= setting 1 =====================
*1120 - Core Clock *2250 - Memory Clock *-96 Vol - Voltage at MSIafterburner *60% - FAN Speed
29.45-30.1 MH/s - Mining ETH 75-76 - Watts per card / GPU-Z and Msiafterburner ========================setting 2==================== *1130 - Core Clock *2080 - Memory Clock *-96 Vol - Voltage at MSIafterburner *70% - FAN Speed
30.1-30.04 MH/s - Mining ETH 75-77 - Watts per card / GPU-Z and Msiafterburner
SETTING THE CLOCKS for memory and core is clear ....... but how to set -96Vol ?
is it possible with -cvddc and -mvddc ??
THANK YOU IN ADVANCE !
REGARDS DANIEL
-cvddc 960 equals to 0.96V. Is that the number you get on MSI Afterburner? This is for GPU core . If you want to adjust the memory voltage you have to use the -mvddc comand.
|
|
|
|
|