Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[lance04]

hmm i Running Claymore's miner for 8 hours on 4x R9 380 (non X) rig,
the hash rate on miner shows 80 Mhash/sec, but on the pool (Etehrmine.org) it dropped from 75 Mhash down to 45 Mhash.
 I switched back to qtminer for a few hours and my pool hash rate returned to normal, so I rebooted the rig and tried
the Claymore miner again and within a hour I seen the hash rate going down again. For now I switched back to qtminer.

[mrdunns]

When setting this up where do you send the secondary coin your mining.

[scryptr]

When setting this up where do you send the secondary coin your mining.

USE A WALLET ADDRESS THAT YOU OWN--

Use the "-dwal" command to send the coins to an address that you own and control.  And, please read the "Readme!!!.txt" file before you start mining.  It may take a couple read-throughs to understand how to set up Claymore's miner.  There are several examples in the readme, and on the Opening Page (OP) of this thread.       --scryptr

[Socket54]

I am having a bit of trouble starting this miner up. I am getting this error and not sure why so any help would be greatly appreciated:
{"jsonrpc":"2.0","result":["0x00218ea06007476976060d6981fc54b9d59970fc80936077f4c44286afa29512","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

I get a similar if not exact error with job timeouts etc etc whether i try dual mining or solo mining ETH only. Here is a snip of the log file if that will help.

Code:

15:03:29:498	1728	args: -epool eth.suprnova.cc:5005 -ewal BlueBills.BlueBills1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal BlueBills.BlueBills -dpsw x -allpools 1 
15:03:29:498	1728	
15:03:29:499	1728	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
15:03:29:499	1728	º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7      º
15:03:29:500	1728	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
15:03:29:500	1728	
15:03:29:701	1728	ETH: 1 pool is specified
15:03:29:701	1728	Main Ethereum pool is eth.suprnova.cc:5005
15:03:29:702	1728	DCR: 1 pool is specified
15:03:29:702	1728	Main Decred pool is dcr.suprnova.cc:3252
15:03:29:963	1728	OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:017	1728	OpenCL platform: NVIDIA CUDA
15:03:30:018	1728	OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:019	1728	OpenCL initializing...

15:03:30:020	1728	AMD Cards available: 1 
15:03:30:020	1728	GPU #0: Ellesmere, 8192 MB available, 36 compute units
15:03:30:020	1728	GPU #0 recognized as Radeon RX 480/580
15:03:30:020	1728	POOL/SOLO version
15:03:30:021	1728	b370 
15:03:30:021	1728	Platform: Windows
15:03:30:068	1728	start building OpenCL program for GPU 0...
15:03:30:441	1728	done
15:03:30:685	1728	GPU #0: algorithm ASM
15:03:31:116	1728	CUDA initializing...

15:03:31:117	1728	NVIDIA Cards available: 1 
15:03:31:117	1728	CUDA Driver Version/Runtime Version: 8.0/8.0
15:03:31:118	1728	GPU #1: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1

15:03:31:119	1728	Total cards: 2 
15:03:34:761	1728	NVML version: 8.382.53
15:03:35:020	25fc	ETH: Stratum - connecting to 'eth.suprnova.cc' <149.202.76.194> port 5005
15:03:35:109	1728	DUAL MINING MODE ENABLED: ETHEREUM+DECRED

15:03:35:110	1728	ETH: nicehash stratum mode
15:03:35:110	ba4	 DCR: Stratum - connecting to 'dcr.suprnova.cc' <217.182.138.167> port 3252
15:03:35:112	1728	"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
15:03:35:113	1728	Watchdog enabled
15:03:35:114	1728	Remote management (READ-ONLY MODE) is enabled on port 3333
15:03:35:115	1728	

15:03:35:180	25fc	send: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}

15:03:35:181	25fc	send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

15:03:35:182	25fc	send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills1","x"]}

15:03:35:183	25fc	ETH: Stratum - Connected (eth.suprnova.cc:5005)
15:03:35:259	ba4	send: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}

15:03:35:260	ba4	send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

15:03:35:260	ba4	send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills","x"]}

15:03:35:262	ba4	 DCR: Stratum - Connected (dcr.suprnova.cc:3252)
15:03:35:412	ba4	got 579 bytes
15:03:35:412	ba4	buf: {"id":1,"result":[[["mining.notify","deadbeefcafebabeff6a050000000000"]],"c6d4e2a0d9c5c05b1cf7a8f4",12],"error":null}
{"id":null,"method":"mining.set_difficulty","params":[16]}
{"id":null,"method":"mining.notify","params":["acaf","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","c846cc7e26b0f67e268062ddb8875356ec6c7f47e1ebaf3cc442e2469e2d8c16a62916f53231e3d21ea621f4bbcd0cf892fd1441003c6f1126c01ab379fb6c8d0100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200e53300000fbb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb0f",false]}

15:03:35:412	ba4	parse packet: 117
15:03:35:413	ba4	remove first packet 461
15:03:35:414	ba4	new buf size: 461
15:03:35:415	ba4	parse packet: 58
15:03:35:415	ba4	remove first packet 402
15:03:35:416	ba4	new buf size: 402
15:03:35:417	ba4	parse packet: 401
15:03:35:418	ba4	new buf size: 0
15:03:35:553	ba4	got 36 bytes
15:03:35:590	ba4	buf: {"id":2,"result":true,"error":null}

15:03:35:591	ba4	parse packet: 35
15:03:35:592	ba4	 DCR: Authorized
15:03:35:593	ba4	new buf size: 0
15:03:38:462	25fc	checkread timeout
15:03:41:682	25fc	checkread timeout
15:03:44:926	25fc	checkread timeout
15:03:48:168	25fc	checkread timeout
15:03:49:844	25fc	got 236 bytes
15:03:49:845	25fc	buf: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:49:846	25fc	parse packet: 235
15:03:49:847	25fc	Received unknown response: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:49:848	25fc	new buf size: 0
15:03:52:666	ba4	got 401 bytes
15:03:52:666	ba4	buf: {"id":null,"method":"mining.notify","params":["acb0","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","d03938bd5a2167877421ed8c6c714d8fa398175698f25545e8c38e694d7a96598477890ac4e74a93bef2d093dcd29d71e15bee23fa08682b745482d2512711a70100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200bd3400002abb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb2a",true]}

15:03:52:666	ba4	parse packet: 400
15:03:52:666	ba4	new buf size: 0
15:03:52:667	ba4	 DCR: 07/19/17-15:03:52 - New job from dcr.suprnova.cc:3252
15:03:52:667	ba4	target: 0x000000000ffff000 (diff: 68GH), block #152258
15:03:53:009	25fc	got 236 bytes
15:03:53:009	25fc	buf: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:53:009	25fc	parse packet: 235
15:03:53:010	25fc	Received unknown response: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:53:010	25fc	new buf size: 0

[barismanco]

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

[P00P135]

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

Have you OC'd the card or modded the Bios?  Could just be an unstable overclock or maybe not enough power from your power supply.

[Korsakopf]

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

Try running the bat file from a Command window, then you can see if an error pops up instead of the window just closing. See https://www.windows-commandline.com/cmd-start-command/ on how to start a Command window in Windows. Good luck!

[barismanco]

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

Have you OC'd the card or modded the Bios?  Could just be an unstable overclock or maybe not enough power from your power supply.

I did not OC the card. Modded it before but windows could not recognise it. So I installed the default rom back. Now windows succesfully recognised. Until I start the miner, windows doesn't have problem. After miner starts, a few later screen turns off.

I am using a 450 Watt power supply with just single card.
I am not sure but I think this power is enough for single card.

 

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

Try running the bat file from a Command window, then you can see if an error pops up instead of the window just closing. See https://www.windows-commandline.com/cmd-start-command/ on how to start a Command window in Windows. Good luck!

I tried this just now. Nothing changed.
I monitored with msi afterburner. Normally it works around 300 MHz. Whe miner starts, it goes 1209 MHz and display turns off.

[w0lf0.]

i have better hashrate with older  

[Socket54]

I am having a bit of trouble starting this miner up. I am getting this error and not sure why so any help would be greatly appreciated:
{"jsonrpc":"2.0","result":["0x00218ea06007476976060d6981fc54b9d59970fc80936077f4c44286afa29512","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

I get a similar if not exact error with job timeouts etc etc whether i try dual mining or solo mining ETH only. Here is a snip of the log file if that will help.

Code:

15:03:29:498	1728	args: -epool eth.suprnova.cc:5005 -ewal BlueBills.BlueBills1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal BlueBills.BlueBills -dpsw x -allpools 1 
15:03:29:498	1728	
15:03:29:499	1728	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
15:03:29:499	1728	º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7      º
15:03:29:500	1728	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
15:03:29:500	1728	
15:03:29:701	1728	ETH: 1 pool is specified
15:03:29:701	1728	Main Ethereum pool is eth.suprnova.cc:5005
15:03:29:702	1728	DCR: 1 pool is specified
15:03:29:702	1728	Main Decred pool is dcr.suprnova.cc:3252
15:03:29:963	1728	OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:017	1728	OpenCL platform: NVIDIA CUDA
15:03:30:018	1728	OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:019	1728	OpenCL initializing...

15:03:30:020	1728	AMD Cards available: 1 
15:03:30:020	1728	GPU #0: Ellesmere, 8192 MB available, 36 compute units
15:03:30:020	1728	GPU #0 recognized as Radeon RX 480/580
15:03:30:020	1728	POOL/SOLO version
15:03:30:021	1728	b370 
15:03:30:021	1728	Platform: Windows
15:03:30:068	1728	start building OpenCL program for GPU 0...
15:03:30:441	1728	done
15:03:30:685	1728	GPU #0: algorithm ASM
15:03:31:116	1728	CUDA initializing...

15:03:31:117	1728	NVIDIA Cards available: 1 
15:03:31:117	1728	CUDA Driver Version/Runtime Version: 8.0/8.0
15:03:31:118	1728	GPU #1: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1

15:03:31:119	1728	Total cards: 2 
15:03:34:761	1728	NVML version: 8.382.53
15:03:35:020	25fc	ETH: Stratum - connecting to 'eth.suprnova.cc' <149.202.76.194> port 5005
15:03:35:109	1728	DUAL MINING MODE ENABLED: ETHEREUM+DECRED

15:03:35:110	1728	ETH: nicehash stratum mode
15:03:35:110	ba4	 DCR: Stratum - connecting to 'dcr.suprnova.cc' <217.182.138.167> port 3252
15:03:35:112	1728	"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
15:03:35:113	1728	Watchdog enabled
15:03:35:114	1728	Remote management (READ-ONLY MODE) is enabled on port 3333
15:03:35:115	1728	

15:03:35:180	25fc	send: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}

15:03:35:181	25fc	send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

15:03:35:182	25fc	send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills1","x"]}

15:03:35:183	25fc	ETH: Stratum - Connected (eth.suprnova.cc:5005)
15:03:35:259	ba4	send: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}

15:03:35:260	ba4	send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

15:03:35:260	ba4	send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills","x"]}

15:03:35:262	ba4	 DCR: Stratum - Connected (dcr.suprnova.cc:3252)
15:03:35:412	ba4	got 579 bytes
15:03:35:412	ba4	buf: {"id":1,"result":[[["mining.notify","deadbeefcafebabeff6a050000000000"]],"c6d4e2a0d9c5c05b1cf7a8f4",12],"error":null}
{"id":null,"method":"mining.set_difficulty","params":[16]}
{"id":null,"method":"mining.notify","params":["acaf","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","c846cc7e26b0f67e268062ddb8875356ec6c7f47e1ebaf3cc442e2469e2d8c16a62916f53231e3d21ea621f4bbcd0cf892fd1441003c6f1126c01ab379fb6c8d0100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200e53300000fbb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb0f",false]}

15:03:35:412	ba4	parse packet: 117
15:03:35:413	ba4	remove first packet 461
15:03:35:414	ba4	new buf size: 461
15:03:35:415	ba4	parse packet: 58
15:03:35:415	ba4	remove first packet 402
15:03:35:416	ba4	new buf size: 402
15:03:35:417	ba4	parse packet: 401
15:03:35:418	ba4	new buf size: 0
15:03:35:553	ba4	got 36 bytes
15:03:35:590	ba4	buf: {"id":2,"result":true,"error":null}

15:03:35:591	ba4	parse packet: 35
15:03:35:592	ba4	 DCR: Authorized
15:03:35:593	ba4	new buf size: 0
15:03:38:462	25fc	checkread timeout
15:03:41:682	25fc	checkread timeout
15:03:44:926	25fc	checkread timeout
15:03:48:168	25fc	checkread timeout
15:03:49:844	25fc	got 236 bytes
15:03:49:845	25fc	buf: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:49:846	25fc	parse packet: 235
15:03:49:847	25fc	Received unknown response: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:49:848	25fc	new buf size: 0
15:03:52:666	ba4	got 401 bytes
15:03:52:666	ba4	buf: {"id":null,"method":"mining.notify","params":["acb0","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","d03938bd5a2167877421ed8c6c714d8fa398175698f25545e8c38e694d7a96598477890ac4e74a93bef2d093dcd29d71e15bee23fa08682b745482d2512711a70100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200bd3400002abb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb2a",true]}

15:03:52:666	ba4	parse packet: 400
15:03:52:666	ba4	new buf size: 0
15:03:52:667	ba4	 DCR: 07/19/17-15:03:52 - New job from dcr.suprnova.cc:3252
15:03:52:667	ba4	target: 0x000000000ffff000 (diff: 68GH), block #152258
15:03:53:009	25fc	got 236 bytes
15:03:53:009	25fc	buf: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:53:009	25fc	parse packet: 235
15:03:53:010	25fc	Received unknown response: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}

15:03:53:010	25fc	new buf size: 0

Just to add to this, i can successfully mine at miningpoolhub doing ETH+Sia without any error responses.

[Skol600ml]

Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB

Its def give 21 mhs after flash 26mhs.

can someone help ? i would like got 28-30 mhs.

what I Did:

in flash/Bios   24 Mhs
Memory

MHz   Mv
300    1000
1000  1000
2000  1000

Mhz | Timing Strap

1750 copy
2000 replace.



in flash/Bios   26 mhs
Memory

MHz   Mv
300    900
1000  900
2000  900

Mhz | Timing Strap

1750 copy
2000 replace.



any ideas to get 28-30 mhs?

Coping 1750 isn't best option for Hynix 8gb. Seach for a better string. It's out there.

My Gigabyte Aorus 8GB Hynix are still doing on eth 29.4. eth / 1.02 DRC on dual and 30.7 when dag isn't problem like Ubiq.

[TechPark]

Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB

Its def give 21 mhs after flash 26mhs.

can someone help ? i would like got 28-30 mhs.

what I Did:

in flash/Bios   24 Mhs
Memory

MHz   Mv
300    1000
1000  1000
2000  1000

Mhz | Timing Strap

1750 copy
2000 replace.



in flash/Bios   26 mhs
Memory

MHz   Mv
300    900
1000  900
2000  900

Mhz | Timing Strap

1750 copy
2000 replace.



any ideas to get 28-30 mhs?

Increase RAM clock to 2200 (or close to that, what is stable for you)
Decrease GPU: 1200 MHz
Decrease TDP: -10%

With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows)

You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios.

I have 5 rigs and have not noticed hashrate drop.
The lastest screenshot: https://drive.google.com/file/d/0B1bdtLpUkQ3BQ3VfaDRLdlZBODQ/view?usp=sharing
W10, 17.6.2, CD9.7, RX480 8GB x4, 1250/2075
The first card is connected to the monitor therefor OC not applied.

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

Imagine asking a doctor: "I am dying, please help"...
If you want help you have to provide as much information as possible!
What is your Hardware, Software, Configuration, and etc? Post screenshots from GPU-Z, MSI AB, PBE, Claymore logs ant etc....

[fluxdane]

Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s

I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining).

My settings:
Power Limit: 65%
Temp Limit: 63 Cº
Core Clock: 145 Mhz
Memory Clock: 1000 Mhz
Fan: 90%

This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings.

Hope it helps

Thanks for the setting but did you checked the watt meter from wall because I get 720-730 with 7 cards

Wallmeter checked 704w, I’m solo mining eth. More info, CPU is Celeron, I have 4GB RAM and 2x750w Corsair PSUs.

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

Imagine asking a doctor: "I am dying, please help"...
If you want help you have to provide as much information as possible!
What is your Hardware, Software, Configuration, and etc? Post screenshots from GPU-Z, MSI AB, PBE, Claymore logs ant etc....

If this happens only when dual mining you are probably expecting too much from your cards. If you see this happening sometimes when solo mining as well, then you have probably overclocked too much, or incompatible GPU BIOS settings. Here a few things you can try:
Check overclocking settings, you may want to overclock less, resulting in less mh/s but more stable mining.
When dual mining try to decrease -dcri for the second coin until your rig runs stable.
Try also dual mining eth+another coin except SIA.
Try dual mining SIA+another coin except eth.
If nothing helps, you may have a faulty GPU or riser.

Cheers

[mzeoatrakeb]

Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB

Its def give 21 mhs after flash 26mhs.

can someone help ? i would like got 28-30 mhs.

what I Did:

in flash/Bios   24 Mhs
Memory

MHz   Mv
300    1000
1000  1000
2000  1000

Mhz | Timing Strap

1750 copy
2000 replace.



in flash/Bios   26 mhs
Memory

MHz   Mv
300    900
1000  900
2000  900

Mhz | Timing Strap

1750 copy
2000 replace.



any ideas to get 28-30 mhs?

Coping 1750 isn't best option for Hynix 8gb. Seach for a better string. It's out there.

My Gigabyte Aorus 8GB Hynix are still doing on eth 29.4. eth / 1.02 DRC on dual and 30.7 when dag isn't problem like Ubiq.

what option do you have? can you share it?

[Yey09]

Im getting 100% rejected Decred shares on decredpool.org, when using on nicehash only have 0-1%.

Where's the problem, decredpool.org?

[Nightwolf81]

Hi folks,

got a little problem this time, maybe anyone can help me out.

Using a rig with the following components:

MB: MSI Z270 Pro
CPU: Core i3T
RAM: 16 GB RAM
GPU: 6x Palit Gamerock 1070 (upgrading to 8 this weekend)
PWR: Corsair 1000W Platinum (660 W @wall)
OS: Win 10 Pro
Driver: 372.10 64 bit


Running smoothly oc'ed (Core +125, Mem +725 (Hynix) while using Powertarget of 57 in MSI Afterburner) at a reported ETH hashrate of ~192 MH/s, so each card pulls slighty >32 MH/s.

So everything should be fine, but since i updated to 9.7, statistics in ethermine is showing massive drops in current effective hashrate, not recovering to around of the reported hasrate (if this would be the normal up-and-down I already knew from 9.6, everything would be fine).

But in 9.7 the effective hashrate drops just after 3 hours of mining to about 160, stayin' there.
Restarting the Claymore is solving this issue and effective hashrate is also going up to normal.

Anyone got the same problem, or any suggestions?

Wishing good earnings
Wolf

[barismanco]

Hi,

I started to use this dual miner. I want to mine ETH+SC.

When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.

Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)

I didn't understand what happens.

Can anyone help me?

Thank you all.

Imagine asking a doctor: "I am dying, please help"...
If you want help you have to provide as much information as possible!
What is your Hardware, Software, Configuration, and etc? Post screenshots from GPU-Z, MSI AB, PBE, Claymore logs ant etc....

You are right. I am at work now. Later I'll share these infos too detalied.



But as a summary(as I remember)

Core2Duo processor,
160 GB 2.5" laptop harddrive,
pegatron ipx41-d3 motherboard.
4+2 GB RAM (I also tried with single 4 GB)
450 watt atx power supply
Claymore cryptonote 9.7

thank you.

[ne0x86]

Im getting 1 incorrect share every 2 hours but always 0 rejected. Its normal? could be overclock or underlock?

Thanks

[Nightwolf81]

Im getting 1 incorrect share every 2 hours but always 0 rejected. Its normal? could be overclock or underlock?

Thanks

That's possible for your scenario (oc'ed and uv'ed).
But I'm guessing 1 rejected share outta 400 isn't too bad at all..., is it?

Greetz Wolf

[Coin++]

i have better hashrate with older  

With your free version ?