Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Temporel]

Hi claymore and all,

My rig has 7 gpu.

I'm using biostar TB250-btc motherboard with 1050 Supersonic PSU.
Running 7 1070 Windforce OC 8GB gpu.

My rig can run from 1 to 2 days.

However, upon facing error, i have set -r 1 to trigger a reboot.bat to rs it.

This is where to problem occurs.

When my system restart and the claymore miners starts, it couldn't detect my gpu and starts prompting the error below:

No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit

The error just kept repeating itself.

The miner doesn't restart and this error doesn't trigger my -r 1 reboot.bat as well.

How do i solve it: i will have to manually restart my rig and sometimes i will have to do it 2 - 3 times till it detects again.

Any idea how to fix this problem or anyway to allow the system to restart upon facing not being able to detect GPUs?

Please help me out guys.

Thank you!

Reinstall GPU drivers

May i know what's the best driver to use?

I'm using 372.54 NVIDIA driver which is recommended by Claymore himself.
but still having problems now and then for unable to detect gpu after system rebooting.

I always use latest drivers. My rigs never crash, dont slowdown and I get same or better hashrate than previous versions (yes, I always install the latest).
Im currently using etherminer with my Nvidia cards but I never had a single problem with Claymore (any versions) dual or not.

Hi,

thanks for replying.

so i assumed you are using the latest NVIDIA driver 385.28?

is it working fine for claymore miner ?
because i have previously tried upgrading to higher drivers and after a 10mins run, it gives me a gpu error.

i tried to troubleshoot and ended up rolling back my drivers and found this workable driver which is 372.54.
But however, it still have some problem whenever my system restarts, it cant detect the gpu.

Do you think it may not be just driver issues?

last time I used Claymore (9.8 over Windows 10 64bit) with my Nvidia cards, I was using version 384.94 since the day it was released and I had no issue. Those cards are still running that version but with etherminer but thanks to you, I will upgrade today .

I dont plan to go back to Claymore with those cards for now but Ill run a 60 minutes test and report back.

reporting back, no crash while dual mining Sia. Same hashrate too.

[1713411656]

1713411656

[1713411656]

1713411656

[1713411656]

1713411656

[opies32765]

Anyone getting a flashing screen after the updates ?

I have cleared the drivers out several times and nothing

RX 480's Modded and overclocked...hashing fine

Also once in a while i get white noise across the entire screen ?

Thanks in advance

[TechPark]

Hello
did already someone test the AMD Mining driver?
pute-Release-Notes.aspx]https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx
If yes, is the DAG Problem solved with this driver?
Thank you.

(c) Never look back 

[TechPark]

Hey guys
how i start  eth mining ?

1. Run start.bat
2. If it does not help read the first page of this thread

[MinerosYV]

Hey!
I'm having a situation with my rig, the specs are as follow:

Windows 10
850W Gold Modular
4x RX580 8 GB Nitro+
Motherboard Gigabyte H110-D3A

Everything works smooth, except when adding the 5th RX580 8GB Pulse, after a few seconds the computer just crash.
Can anyone help me debugging this?
Where can I see why the computer is crashing, what is causing

Thanks

850 PSU is lacking power, got 4 x 580 8Gb nitros running they pull 1250 watts from the wall, mind you DCR +45.

[stoniestfool]

I have a problem. If I install any driver higher than 16.11 and start msi my hashrate is always 4 mhs on all cards. I know this is stuck in low power stat at 300/300. I can set all options in the .bat and they work fine on higher drivers. I do have setx's set in my bat.I am also using 9.8 but every version gives the same result. Msi running makes all card stay at 4mhs. I tried changing options in msi. Including kernal/user mode, voltage enable/disable,disable dsp,extend overclocking ect. Any idea's?
I was getting windows 10 error that graphic process was being limited. I google that and changed regit to have tdrdelay of 8. That did not fix it either. I do have 32 gb of virtual memory set.

[MinerosYV]

hi, i have dual eth+dcr, but i want to decrease only decred mining , without to lose eth mhs... (-dcri ) option  decrease both eth+dcr, how to decrease only dcr

That's what the + and - sings are for

[Myth888]

I have a problem. If I install any driver higher than 16.11 and start msi my hashrate is always 4 mhs on all cards. I know this is stuck in low power stat at 300/300. I can set all options in the .bat and they work fine on higher drivers. I do have setx's set in my bat.I am also using 9.8 but every version gives the same result. Msi running makes all card stay at 4mhs. I tried changing options in msi. Including kernal/user mode, voltage enable/disable,disable dsp,extend overclocking ect. Any idea's?
I was getting windows 10 error that graphic process was being limited. I google that and changed regit to have tdrdelay of 8. That did not fix it either. I do have 32 gb of virtual memory set.

have you updated your windows 10?

[stoniestfool]

I have a problem. If I install any driver higher than 16.11 and start msi my hashrate is always 4 mhs on all cards. I know this is stuck in low power stat at 300/300. I can set all options in the .bat and they work fine on higher drivers. I do have setx's set in my bat.I am also using 9.8 but every version gives the same result. Msi running makes all card stay at 4mhs. I tried changing options in msi. Including kernal/user mode, voltage enable/disable,disable dsp,extend overclocking ect. Any idea's?
I was getting windows 10 error that graphic process was being limited. I google that and changed regit to have tdrdelay of 8. That did not fix it either. I do have 32 gb of virtual memory set.

have you updated your windows 10?
I think it did auto update before I disabled that wit dws. That the problem?

[KGV]

DAG FIX

http://imgur.com/a/wDraV

Overdrive

http://forums.guru3d.com/showthread.php?t=416116

Dont forget atikmdag-patcher-1.4.5 after installing

[oslak]

DAG FIX

http://imgur.com/a/wDraV

Overdrive

http://forums.guru3d.com/showthread.php?t=416116

Dont forget atikmdag-patcher-1.4.5 after installing

What OS? doesn't work even after applying patch on windows 7.

[KGV]

WIN10 LTSB

1 Use DDU
2 Manual install
3 Patch
GO!

Also MSI Afterburner 4.4.0 Beta 16

[Havane]

Quick feedback : everything is stable with my 6 RX 480 rig, and the new AMD blockchain driver. With a modded bios, MSI afterburner for undervolting, I have 180 Mh/s back with ETH + DCR mining, instead of 160 Mh/s before   

[juville]

Hi claymore and all,

My rig has 7 gpu.

I'm using biostar TB250-btc motherboard with 1050 Supersonic PSU.
Running 7 1070 Windforce OC 8GB gpu.

My rig can run from 1 to 2 days.

However, upon facing error, i have set -r 1 to trigger a reboot.bat to rs it.

This is where to problem occurs.

When my system restart and the claymore miners starts, it couldn't detect my gpu and starts prompting the error below:

No NVIDIA CUDA GPUs detected.
No AMD OPENCL or NVIDIA CUDA GPUs found, exit

The error just kept repeating itself.

The miner doesn't restart and this error doesn't trigger my -r 1 reboot.bat as well.

How do i solve it: i will have to manually restart my rig and sometimes i will have to do it 2 - 3 times till it detects again.

Any idea how to fix this problem or anyway to allow the system to restart upon facing not being able to detect GPUs?

Please help me out guys.

Thank you!

Reinstall GPU drivers

May i know what's the best driver to use?

I'm using 372.54 NVIDIA driver which is recommended by Claymore himself.
but still having problems now and then for unable to detect gpu after system rebooting.

I always use latest drivers. My rigs never crash, dont slowdown and I get same or better hashrate than previous versions (yes, I always install the latest).
Im currently using etherminer with my Nvidia cards but I never had a single problem with Claymore (any versions) dual or not.

Hi,

thanks for replying.

so i assumed you are using the latest NVIDIA driver 385.28?

is it working fine for claymore miner ?
because i have previously tried upgrading to higher drivers and after a 10mins run, it gives me a gpu error.

i tried to troubleshoot and ended up rolling back my drivers and found this workable driver which is 372.54.
But however, it still have some problem whenever my system restarts, it cant detect the gpu.

Do you think it may not be just driver issues?

last time I used Claymore (9.8 over Windows 10 64bit) with my Nvidia cards, I was using version 384.94 since the day it was released and I had no issue. Those cards are still running that version but with etherminer but thanks to you, I will upgrade today .

I dont plan to go back to Claymore with those cards for now but Ill run a 60 minutes test and report back.

reporting back, no crash while dual mining Sia. Same hashrate too.

Can i know how many GPUs and what GPUs do you have?

Also, what watt PSU are you using right now?

I'm running at around 1000watt on a 1050watt PSU.
Not sure is this the reason why it has problem detecting my GPU whenever the system restarts.

Or its just purely driver issue.

[kkourmousis]

i have 5 x RX580 Nitro + Cards (Hynix)

I ahve updated to beta driver and Claymore 9.8 like others i cant control voltages in claymore nor latest AfterBurner but i can in trixx. Im actually settings clocks in voltages and fans in trixx and im running stable at 30 Mhs dual mining eth and SIA using around 100w per card in GPUz

I have same cards and TRIXX does not work. Are yours 8GB as well?

When TRIXX opens I do not have values on anything. All clocks are zeros. Any changes I do have 0 effect

Yes my cards are 8gb, sorry if this is a daft question but are you double clicking into the values for GPU/CPU clock, typing the values and then clicking the apply button at the bottom?

Yes I am. Trixx v 6.4 right
It may be that I have iGPU enabled. I will check in a couble of hours, now I am in a football match (forca PAOK :p )

Nothing changed. I am still unable to perform any changes using Trixx

[h311m4n]

@Claymore

Can we expect the next update to fix the voltage control from your miner with the latest amd driver/dag fix? I guess like quite a few farmers, we'd rather manage everything from a single program rather than use AB or remod all the bios' again with fixed voltages

Thanks!

[cdrx]

dag change and job timeouts will make u loose the voltage sets, I don't think is fixable, if it was, Claymore would have done it already.

if u use use the claymore settings to not change dag (fee related) and bigger job timeouts will not change undervoltage settings, untill maybe something else interfere with ur miner.

but everything works great in full speed when undervolted in bios - rx580s', latest claymore, amd beta chain driver, AB beta 16.

[adaseb]

Just undervolt in WattTool right when Windows starts. Its the only feature that works with the new drivers.

[Claymore]

@Claymore
Can we expect the next update to fix the voltage control from your miner with the latest amd driver/dag fix? I guess like quite a few farmers, we'd rather manage everything from a single program rather than use AB or remod all the bios' again with fixed voltages
Thanks!

Have you tried latest AB with latest AMD drivers for blockchain? It does not work for me (I don't see any changes in power consumption when I change voltage in AB), at least in Win10+RX580. So the problem is not in my miner only, it looks like another ADL issue:
https://bitcointalk.org/index.php?topic=1433925.msg20538901#msg20538901
I've contacted AMD and we will try to fix it.

[zenmining]

Anybody knows about software for monitor Claymor rigs and pool data in one place? Can’t find anything except EthMan?