muzuca
Member
Offline
Activity: 182
Merit: 13
|
|
February 01, 2018, 10:06:05 PM |
|
With 1 card miner works fine. With 3 cards it just hangs at
"POOL/SOLO version" any1 had this? How to fix?
What is your setup in Claymore start.bat? Your GPUs? Probably use the same config for the 3 GPUs is hanging.
|
|
|
|
|
|
|
The network tries to produce one block per 10 minutes. It does this by automatically adjusting how difficult it is to produce blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
Razvan84
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 01, 2018, 10:32:53 PM |
|
i use a ASROCK H110 BTC Pro+ Mainboard with AMD Cards and Claymore Miner on SimpleMiningOS. How can i see which GPUx Card is which PCIE Port on the Mainboard, for debug or tuning the cards...?
root / utils / wolfamdctrl For each card you can turn the fan speed @ 100% or stop it. The motherboard starts the numbering from the big pcie and moving opposite the cpu the same color ( black )
|
|
|
|
goodbitprofit
Newbie
Offline
Activity: 67
Merit: 0
|
|
February 01, 2018, 11:36:22 PM |
|
Finally to I also contribute. Claymore, thanks for this excellent treed and all members. After my first month of mining, results are amazing. No.1 rig - 6 GPU RX580-8 g MB Gigabyte H110-D3a - Bios upgraded No.2 rig - 5 GPU RX480-4 g MB Asus Prime Z270 - Bios upgraded
On bouth Ram 4 Gig Win 10 After burner 440 beta 16 Claymore 10.2 Rig 1 - Drivers from August 2017 Rig 2 - Drivers RobinHood
Rig 1 - ETH 180-182 MH/s , PASC 1800 MH/s Rig 2 - ETH 149 MH/s , PASC 1490 MH/s dcri 10 Temp 48-55 C Fun 80-90% Undervolted Still need to see my electric bill
Had a few problems, but after downclocking all its smooth. Also auto restart is amazing solution, only missing Internet Power Restart, Rig 1 sometimes just block, no internet, black screen so it need manually to be restarted.
Keep up good work Claymore
|
|
|
|
chudm
Newbie
Offline
Activity: 59
Merit: 0
|
|
February 02, 2018, 12:07:51 AM |
|
Finally to I also contribute. Claymore, thanks for this excellent treed and all members. After my first month of mining, results are amazing. No.1 rig - 6 GPU RX580-8 g MB Gigabyte H110-D3a - Bios upgraded No.2 rig - 5 GPU RX480-4 g MB Asus Prime Z270 - Bios upgraded
On bouth Ram 4 Gig Win 10 After burner 440 beta 16 Claymore 10.2 Rig 1 - Drivers from August 2017 Rig 2 - Drivers RobinHood
Rig 1 - ETH 180-182 MH/s , PASC 1800 MH/s Rig 2 - ETH 149 MH/s , PASC 1490 MH/s dcri 10 Temp 48-55 C Fun 80-90% Undervolted Still need to see my electric bill
Had a few problems, but after downclocking all its smooth. Also auto restart is amazing solution, only missing Internet Power Restart, Rig 1 sometimes just block, no internet, black screen so it need manually to be restarted.
Keep up good work Claymore
you could restart it with this: SainSmart Web TCP/IP 10A Relay Remote Control Kit I use that without problems!
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
February 02, 2018, 12:18:25 AM |
|
You could also buy a thingy like the smos guy who sells the simple rig resetter. im sure there are other variations, but it just shorts your power pins remotelly.
|
|
|
|
goodbitprofit
Newbie
Offline
Activity: 67
Merit: 0
|
|
February 02, 2018, 12:25:04 AM |
|
Thanks my friends. I know what I need to buy to resolve that restart thing. Only I live in shit country where customs agency put what ever they feel to need to calculate customs fee, so order over Amazon or other e-shop is not a option. I was see on you tube it have several options and I will find a way to resolve and buy them. Also one more major task is to put my rigs in box with filters. Now watching videos for next generation of rigs with Water cooling, but first must to take out some cash.
|
|
|
|
CAAROON
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 02, 2018, 06:15:05 AM |
|
WHAT I SHUT DOWNLOAD THE SOFTWARE FOR WINDOW 7
|
|
|
|
crypper
Member
Offline
Activity: 239
Merit: 12
|
|
February 02, 2018, 09:05:54 AM |
|
Also auto restart is amazing solution, only missing Internet Power Restart, Rig 1 sometimes just block, no internet, black screen so it need manually to be restarted.
Keep up good work Claymore
you could restart it with this: SainSmart Web TCP/IP 10A Relay Remote Control Kit I use that without problems! I use this: TP-Link HS110 WiFi Smart Plug with Energy Monitoring HS100 is a slightly cheaper version without power monitoring. Can restart the rig from my phone from anywhere.
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
|
February 02, 2018, 12:08:24 PM Last edit: February 02, 2018, 01:37:02 PM by ganzocrypt |
|
hello,
since SIA is not minable anymore due to ASIC miners, is it possible for the dev to switch the dual mining to other coins like XVG on blake2s for example? or maybe implementing other algo compatible with Ethash dual mining?
any ideas?
thx
Ok, I read the CLaymore dev is working on 2 new algo for dual mining and should be out soon
|
|
|
|
Grinner888
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 02, 2018, 12:09:20 PM |
|
With 1 card miner works fine. With 3 cards it just hangs at
"POOL/SOLO version" any1 had this? How to fix?
What is your setup in Claymore start.bat? Your GPUs? Probably use the same config for the 3 GPUs is hanging. Turns out my 1000 watt was being drained 1150 watt. So I've downvolted a bit and tore core down until 950 watt is being drawn and it was fixed! Thanks! my 850w might be being drawing 1150w as well. will have to check
|
|
|
|
toxiroxi
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 02, 2018, 03:46:54 PM |
|
For -ethi see the first page.
i f I set -ethi 7, will this change my hash rate too? or maybe for stability -ethi 9?
I have reboots every 3 to 12 hours.
The higher ETH mining intensity, the more consistent effective hashrate you'll get. If your rig reboots that often, maybe your cards are underpowered? Interesting - what is your intensity which you are using for ETH mining? I have it on standard values but i am not sure if this is ideal. my blue statistics (current effective hashrate) is pretty wild going up and down. is this generally normal or should i consider raising the intensity? i am not dual mining.... thanks!
|
|
|
|
prince_igor
Newbie
Offline
Activity: 2
Merit: 0
|
|
February 02, 2018, 06:29:44 PM |
|
Hello. I would like to know if you do have the following problem as mine: as of yesterday when i turned my computer on/off at DAG Epoch 177 on Ethereum Classic my rig made of 6 x GPU GTX 1060 3gb are having the following error: Cuda Error - could not alocate big buffer for DAG.Check readme.txt for possible solutions.Cuda error 11 - cannot write buffer for DAG. Mining Ethereum is not an issue, but with ETC i get red flag.I have the virtual memory set to min 17000mb - max 20000mb.All the recent drivers, CUDA 9.1 and Open CL. The only solution that can help me is putting in command line -eres 1 (default is 2), but my hash rate drops to some GPUs to 1 Mh/s from 22-24 Mh/s. Please help. Thank you.
|
|
|
|
|
marcusa007
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 02, 2018, 07:48:09 PM |
|
I am fairly new at this and have been reading a lot to get up to speed. I have my first rig set up with two RX580 Red Dragon cards (needless to say I should have bought 3 since my plan was to build a trio). I have the system running pretty smooth with smOS. I am dual mining Ethereum and Sia. One of the cards is not performing as well as the other. Purchased from the same retailer the same day. Probably doesn't mean anything and could still be different chipsets.
Here is what I am currently getting: ETH - Total Speed: 56.308 Mh/s, Total Shares: 1141, Rejected: 0, Time: 11:18 ETH: GPU0 26.916 Mh/s, GPU1 29.392 Mh/s SC - Total Speed: 1126.154 Mh/s, Total Shares: 321, Rejected: 0 SC: GPU0 538.314 Mh/s, GPU1 587.840 Mh/s GPU0 t=64C fan=60%%, GPU1 t=58C fan=47%%
I have it set to: Core: 1200 Memory: 2200 Undervolting: 950 Powerstage: 2
I have played around with these settings but can't seem to get it to be higher on GPU0.
Anyone have an Idea or is this the best I am going to get?
Thanks.
|
|
|
|
ljbawss
Newbie
Offline
Activity: 12
Merit: 0
|
|
February 02, 2018, 08:17:02 PM |
|
I am fairly new at this and have been reading a lot to get up to speed. I have my first rig set up with two RX580 Red Dragon cards (needless to say I should have bought 3 since my plan was to build a trio). I have the system running pretty smooth with smOS. I am dual mining Ethereum and Sia. One of the cards is not performing as well as the other. Purchased from the same retailer the same day. Probably doesn't mean anything and could still be different chipsets.
Here is what I am currently getting: ETH - Total Speed: 56.308 Mh/s, Total Shares: 1141, Rejected: 0, Time: 11:18 ETH: GPU0 26.916 Mh/s, GPU1 29.392 Mh/s SC - Total Speed: 1126.154 Mh/s, Total Shares: 321, Rejected: 0 SC: GPU0 538.314 Mh/s, GPU1 587.840 Mh/s GPU0 t=64C fan=60%%, GPU1 t=58C fan=47%%
I have it set to: Core: 1200 Memory: 2200 Undervolting: 950 Powerstage: 2
I have played around with these settings but can't seem to get it to be higher on GPU0.
Anyone have an Idea or is this the best I am going to get?
Thanks.
Mining dual sia is a waste of energy now. With your setup you get 1 or 2 SC a day (maybe 5 cents). What's your speed with solo ETH mining?
|
|
|
|
marcusa007
Newbie
Offline
Activity: 3
Merit: 0
|
|
February 02, 2018, 09:06:15 PM |
|
Just set it to only mine ETH:
ETH - Total Speed: 56.275 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:01 ETH: GPU0 26.862 Mh/s, GPU1 29.413 Mh/s GPU0 t=60C fan=47%%, GPU1 t=49C fan=47%%
Is there anything worthwhile dual mining or is that just adding stress on the cards?
|
|
|
|
toxiroxi
Newbie
Offline
Activity: 17
Merit: 0
|
|
February 02, 2018, 09:19:29 PM |
|
Just set it to only mine ETH:
ETH - Total Speed: 56.275 Mh/s, Total Shares: 2, Rejected: 0, Time: 00:01 ETH: GPU0 26.862 Mh/s, GPU1 29.413 Mh/s GPU0 t=60C fan=47%%, GPU1 t=49C fan=47%%
Is there anything worthwhile dual mining or is that just adding stress on the cards?
at the moment just adding stress and consuming more energy. Wait for claymore until he releases new algos for new coins.....
|
|
|
|
EdjOne
Newbie
Offline
Activity: 5
Merit: 0
|
|
February 02, 2018, 09:27:40 PM |
|
Wait for claymore until he releases new algos for new coins.....
When it's can be released? I have unusual situation: my PSU made much noise in ETH mode only. So, I have to continue with dual mining in order to reduce the noise. Stupid situation, but can't do nothing.
|
|
|
|
Ratledge
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
February 02, 2018, 10:13:46 PM |
|
All mentions - purely arbitrary, purely theoretical calculations. Solo mining: Claymore takes 1%, you are left with 99% ETH PoW time (effort) Ethermine pool takes 1% of your 99% ETH effort Ideally, you should be left with 98% Dual mining: Claymore takes 2%, 98% left, can be truncated to 95% (dual gives more incorrect and stale shares) Ethermine takes 1% of your 95% You are left with ~94% Siamining takes 3% of your Sia effort, Claymore takes none PS: 1. Siacoin is not anymore viable for GPU mining (difficulty and net hashrate skyrocketed). 2. Luck factor makes the effective hashrate fluctuate 10-15% up and down. 3. For AMD RX, optimal dcri values can boost the ETH hashrate by 2-3%. However, incorrect share ratio tends to be about 1-2%, so it levels out. -dcri 85
This is your problem. Too high dual mining intensity crashes the GPUs. While that's true, he must not be keeping up: dual mining is dead for now - until Claymore gets his 10.7 version out (probably a week from his previous statement here?), it will have at least one new algo supported that isn't already being sucked dead by the ASIC miners. "Give it up!" for now...
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
|
February 02, 2018, 10:17:17 PM |
|
Hello,
anyone knows which algo Claymore dev is adding to dual mining ? thx
|
|
|
|
|