FFI2013
|
|
February 13, 2018, 12:01:50 PM |
|
After spending the night reading all the posts in this thread and from other sources besides bitcointalk it seems to me that currently there are no reliable pools for mining XVG , due to overload of miners getting in the dual mining these days, since Claymore released v11 miner. Some pool are stealing just to much of your earnings while others are unreilable and disconnecting miners. People are calculating estimated profits on whattomine, etc and getting great earings but only on the paper, while in practise, when doing this new dual mining (Ethhash + Blake 2s) on these pools that currently support XVG the earings are half or less of the ones shown on whattomine and other calculators. Besides that we had a huge jump in difficulty in mining XVG due to the same reasons. So lets see, more powe consumption, maybe a drop of eth hashrate when dual mining, much more stress on cards then on solo mining, currently unreliable pools, struggle to configurate optimal settings. Mine conclusion: you should wait a few days or a week or two to see the level of difficulty of XVG, and to see are there any reliable pools with no issues and steals. Hope that some of ya agree!
I agree at first I was earning around whattomine calculated now I can't make a 1/10 of that plus I can't keep my rigs on one pool it keeps switching to my failovers these yiimp copy paste pools with their junk servers need to go
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
wtfonly16
|
|
February 13, 2018, 12:41:24 PM |
|
nothing but garbage blake2s verge pools... anybody know solution ?
|
ye i aint bares
|
|
|
mine_phun
Newbie
Offline
Activity: 208
Merit: 0
|
|
February 13, 2018, 01:30:19 PM |
|
nothing but garbage blake2s verge pools... anybody know solution ?
You can mine on NLpool if you want STRATUM SERVERS -o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XVG] | for VERGE (Blake2S) -o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XSH] | for SHIELD -o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=CREA] | for CREATIVECOIN -o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=MAX] | for MAXCOIN
|
|
|
|
BennyT
|
|
February 13, 2018, 01:42:09 PM |
|
Lots of posts on this already. If you're new to mining I understand but or else the DDR3 ram headline should tell you it's not going to mine equihash. Back to Claymore. Second day testing two identical rigs and 10.6 beat 11.0 in accepted shares by almost 200 on the second day. No comparison. Not sure what's going on.
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
February 13, 2018, 02:02:08 PM |
|
Back to Claymore. Second day testing two identical rigs and 10.6 beat 11.0 in accepted shares by almost 200 on the second day. No comparison. Not sure what's going on.
It must be a coincidence, friend has a farm and his hashrate is the same as it was, no change.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
molitar
|
|
February 13, 2018, 02:06:05 PM |
|
Since I moved to version 11 and blake my system keeps crashing Catalyst drivers and rebooting. It does not like Blake that is for sure or the new miner.
|
|
|
|
wtfonly16
|
|
February 13, 2018, 02:11:07 PM |
|
Lots of posts on this already. If you're new to mining I understand but or else the DDR3 ram headline should tell you it's not going to mine equihash. Back to Claymore. Second day testing two identical rigs and 10.6 beat 11.0 in accepted shares by almost 200 on the second day. No comparison. Not sure what's going on. you do know gddr5 has same bandwidth and speed as ddr3 right asics dont use gpu memory...
|
ye i aint bares
|
|
|
Kent2
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 13, 2018, 02:15:56 PM |
|
nothing but garbage blake2s verge pools... anybody know solution ?
You can mine on NLpool if you want STRATUM SERVERS -o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XVG] | for VERGE (Blake2S) -o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XSH] | for SHIELD -o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=CREA] | for CREATIVECOIN -o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=MAX] | for MAXCOIN i mining this pool nlpool.nl 12 hours and 0 balance. 30 gh/s
|
|
|
|
2bitninja
Newbie
Offline
Activity: 1
Merit: 0
|
|
February 13, 2018, 02:25:51 PM |
|
I'm getting only half of my mining speed with Claymore 11 as compared to version 10. This on both my Windows machine and my Linux (EthOS) machine. I'm dual mining ELLA and keccak (Smartcoin). Amy suggestions would be great. This is across all my AMD RX cards.
|
|
|
|
wsminer
Newbie
Offline
Activity: 12
Merit: 0
|
|
February 13, 2018, 02:26:07 PM |
|
nothing but garbage blake2s verge pools... anybody know solution ?
You can mine on NLpool if you want STRATUM SERVERS -o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XVG] | for VERGE (Blake2S) -o stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> [-p c=XSH] | for SHIELD -o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=CREA] | for CREATIVECOIN -o stratum+tcp://mine.nlpool.nl:5133 -u <WALLET_ADDRESS> [-p c=MAX] | for MAXCOIN i mining this pool nlpool.nl 12 hours and 0 balance. 30 gh/s ? Can you contact me on the email address on the site www.nlpool.nl? I will check for you
|
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
February 13, 2018, 02:45:44 PM |
|
i mining this pool nlpool.nl 12 hours and 0 balance. 30 gh/s
What exactly do you expect from a pool with only 35 miners and 200GH/s b2s hashpower?
|
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
February 13, 2018, 02:53:07 PM |
|
I'm getting only half of my mining speed with Claymore 11 as compared to version 10. This on both my Windows machine and my Linux (EthOS) machine. I'm dual mining ELLA and keccak (Smartcoin). Amy suggestions would be great. This is across all my AMD RX cards.
Probably is your config cause like I said my friend has a farm and everything is the same, well I did the config so I can say everything is fine.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
Maniac9331
Newbie
Offline
Activity: 20
Merit: 0
|
|
February 13, 2018, 03:48:01 PM |
|
Hello, what is the expected hashrate for dualmining with GTX 1070? I have a rig of 6x Gigabyte G1 GTX 1070 and I get an average of 31,3 ETH and 880 XVG. My OC settings are +670 memory, +100 clock and 80% voltage. I use -dcri 80 value.
i use 790 memory, 63% voltage, -200 core i get 32.500mhs this is eth only
|
|
|
|
aliscomputers
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 13, 2018, 05:31:26 PM Last edit: February 16, 2018, 12:49:52 AM by aliscomputers |
|
Greetings miners, I just started new pool for XVG on blake2s algo(for ETH+XVG dual). I will be more than happy if you help to test it and see if everything is okay. We set up only 0.5% fee and in next days or week expect more coins to mine or even few more algos. stratum+tcp://verge.ehu.bg:5766 -dpsw Kind Regards! Enjoy NEW XVG POOL 0% FEE UP UP UP The Pool is with 0% fee for next 1 month!!! stratum+tcp://verge.ehu.bg:5766
|
|
|
|
groovytechno
Newbie
Offline
Activity: 49
Merit: 0
|
|
February 13, 2018, 06:51:54 PM |
|
Here's something interesting....
I'm using Unimining for XVG. (for the past 27 hours, I'm not noticing any difference to ZPOOL regarding payouts, unfortunately)
They have 2 XVG pools, where one of them they ask us to not use it, which is this one: "Please do not use pool.unimining.net to mine XVG"
They also have this pool where they are encouraging us to use it. "Please use xvg.eu1.unimining.net to mine XVG"
The strange thing is my hashrate for XVG is almost half using xvg.eu1.unimining.net to mine XVG. My hashrate is almost double when I use pool.unimining.net to mine XVG.
Everything in my .bat file is identical, other than the pool address.
I wonder why that is...
It doesn't seem to affect my 480s and my 570s too much, my 580's on multiple rigs are the cards performing about half the hash on the pool in question.
|
|
|
|
Coyn
Jr. Member
Offline
Activity: 66
Merit: 1
|
|
February 13, 2018, 07:05:38 PM |
|
Adding 3500Ghash right now to http://nlpool.nl/See you there 0% fee
|
|
|
|
groovytechno
Newbie
Offline
Activity: 49
Merit: 0
|
|
February 13, 2018, 07:14:58 PM |
|
I'll throw another 60k at it for 24 hours to test it out.... I'll get to it soon.
|
|
|
|
Dbatch
Newbie
Offline
Activity: 15
Merit: 0
|
|
February 13, 2018, 07:26:47 PM |
|
Long time lurker first time poster.. today i added a riser to one of my rigs and tried to use my old r9 270 with my 2x rx 480 in same rig.. it detects the 2gb r9270 but it has 0 mhs.. some help please thanks. This is my first time using a riser so maybe i missed a step?
|
|
|
|
ganzocrypt
Newbie
Offline
Activity: 162
Merit: 0
|
|
February 13, 2018, 07:33:12 PM |
|
Long time lurker first time poster.. today i added a riser to one of my rigs and tried to use my old r9 270 with my 2x rx 480 in same rig.. it detects the 2gb r9270 but it has 0 mhs.. some help please thanks. This is my first time using a riser so maybe i missed a step?
if you are trying to mine ETH 2Gb cards are not enough anymore, you might want to try Ubiq, not sure if you can dual mine. Let us know
|
|
|
|
slonik123
Newbie
Offline
Activity: 13
Merit: 0
|
|
February 13, 2018, 07:44:20 PM |
|
I also like this miner and hope that devs will continue with it. Any competition is good. Devs are currently busy to release it, so let's wait..  I think let's wait for new version.
|
|
|
|
|