Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Zosinburg]

Any chance CryptoNight can be added to the duel miner?

It is not possible. The CryptoNight use the core and memory both intensively.

[1713554324]

1713554324

[1713554324]

1713554324

[1713554324]

1713554324

[big_daddy]

I am getting 2 MHs more than before in total
7 cards rig
with this 11.0 version installed

Good job Clay.

[adyspd]

Just in a few minutes all should be fine.

*Edit ... From 16.07 Amsterdam time all should be fine again, latest firewall updates applied.

Issues again, disconnected and after that " B2S: Authorization failed
: [
   21,
   "Serverfull",
   null
]
Socket was closed remotely (by pool)
 B2S: Job timeout, disconnect, retry in 20 sec... "

Is there anything you can do to be stable?
Start asking for fee, we don't mind, we just need a reliable pool.

Thanks !

[sentel]

Mined 1:30 hours with 8700 mh/s on nlpool before server disconnects me and get 0.63 rewards?!
Switched back to antmine till nlpool is stable again.

[Batelk]

Mined 1:30 hours with 8700 mh/s on nlpool before server disconnects me and get 0.63 rewards?!
Switched back to antmine till nlpool is stable again.

antmine is also not very stable.

[mine_phun]

Mined 1:30 hours with 8700 mh/s on nlpool before server disconnects me and get 0.63 rewards?!
Switched back to antmine till nlpool is stable again.

If you get disconnected for a few seconds, that doesn't mean your profit is lost. Your profit is stored in the database.
The difficulty of Verge is going from low to very high ( From 3.x to 11.x ) this evening .... This means the difficulty has increased 4 times, and that the earnings get 4 times less during those hours. This evening it was very high and not many shares were found.

We are working on the stability around the clock, don't worry. Like i said, a few disconnects don't matter in 24 hours time. Your profits won't get hurt.
Perhaps some should consider mining XSH ( Shield ) instead of Verge.....The difficulty is much lower as far as i can see. You can mine shield by changing the c=XVG field to c=XSH.

[PB_SilentMiner]

Need some help, rig has been stable for months, then all of a sudden its gone strange.

Win10FCU(1709)/Adrenalin 17.2.1/CM11.0

Besides re-building from scratch and re-doing all BIOS mods from scratch, i'm lost.

getting random crashes, hanging GPU's. Miner restarting.


See below log extract

20:56:21:423   1be4   watchdog - thread 5 (gpu2), hb time 94
20:56:21:423   1be4   watchdog - thread 6 (gpu3), hb time 87203
20:56:21:423   1be4   WATCHDOG: GPU 3 hangs in OpenCL call, exit
20:56:21:423   1be4   watchdog - thread 7 (gpu3), hb time 87359
20:56:21:423   1be4   WATCHDOG: GPU 3 hangs in OpenCL call, exit
20:56:21:423   1be4   watchdog - thread 8 (gpu4), hb time 250
20:56:21:423   1be4   watchdog - thread 9 (gpu4), hb time 94
20:56:21:423   1be4   watchdog - thread 10 (gpu5), hb time 250
20:56:21:423   1be4   watchdog - thread 11 (gpu5), hb time 94
20:56:21:423   1be4   watchdog - thread 12 (gpu6), hb time 94
20:56:21:423   1be4   watchdog - thread 13 (gpu6), hb time 250
20:56:22:173   1be4   GPU 0 temp = 58, old fan speed = 37, new fan speed = 26

20:56:22:173   1be4   GPU 1 temp = 58, old fan speed = 52, new fan speed = 39

20:56:22:189   1be4   GPU 2 temp = 58, old fan speed = 45, new fan speed = 33

20:56:22:204   1be4   GPU 3 temp = 47, old fan speed = 0, new fan speed = 25

20:56:22:204   1be4   GPU 4 temp = 58, old fan speed = 56, new fan speed = 42

20:56:22:220   1be4   GPU 5 temp = 57, old fan speed = 41, new fan speed = 27

20:56:22:220   1be4   GPU 6 temp = 55, old fan speed = 35, new fan speed = 25

20:56:22:345   1be4   Quit, please wait...
20:56:24:783   770   GPU 0 temp = 57, old fan speed = 36, new fan speed = 25

20:56:24:783   770   GPU 1 temp = 57, old fan speed = 51, new fan speed = 37

20:56:24:798   770   GPU 2 temp = 56, old fan speed = 44, new fan speed = 31

20:56:24:798   770   GPU 3 temp = 47, old fan speed = 0, new fan speed = 25

20:56:24:814   770   GPU 4 temp = 57, old fan speed = 55, new fan speed = 40

20:56:24:830   770   GPU 5 temp = 56, old fan speed = 38, new fan speed = 25

20:56:24:830   770   GPU 6 temp = 54, old fan speed = 35, new fan speed = 25

20:56:33:284   1be4   Restarting OK, exit...


20:56:35:940   2824   Check and remove old log files...
20:56:35:940   2824   args: -ewal <MYWALADD>.MinerX -epsw x -gser 5 -mode 1 -tt 62 -cclock 1100,1075,1075,1070,1070,1070,1075 -mclock 2000,2050,2025,2025,2025,2000,2050 -cvddc 900,900,900,900,900,900,900 -mvddc 850,850,850,850,850,850,850 -ftime 10 -dcri 6 -platform 1 -logfile c:\claymore\EthereumMiner\11.0\Logs\Claymore_log.txt -logsmaxsize 100 -mport 0
20:56:35:940   2824   
20:56:35:940   2824   ษออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออป
20:56:35:940   2824   บ                Claymore's Dual GPU Miner - v11.0               บ
20:56:35:940   2824   บ              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             บ
20:56:35:940   2824   ศออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออออผ
20:56:35:940   2824   
20:56:35:940   2824   b501
20:56:36:159   2824   ETH: 6 pools are specified
20:56:36:159   2824   Main Ethereum pool is eu2.ethermine.org:14444
20:56:38:378   2824   OpenCL platform: Intel(R) OpenCL
20:56:38:378   2824   OpenCL platform: AMD Accelerated Parallel Processing
20:56:38:378   2824   AMD topology bug detected, applying a workaround.
20:57:09:963   1b88   
20:57:42:779   1b88   
20:58:15:596   1b88   
20:58:48:413   1b88   
20:59:21:229   1b88   
20:59:54:046   1b88   
21:00:26:862   1b88   
21:00:59:678   1b88   
21:01:32:494   1b88   
21:02:05:312   1b88   
21:02:05:312   1b88   Miner cannot initialize for 5 minutes, need to restart miner!
21:02:05:312   1b88   ADL: Cannot find any AMD adapters
21:02:06:531   1b88   Restarting OK, exit...


After a couple of restarts, it runs fine, it can be anything from 5mins-24 hours before it happens again.

Driving me nuts.

[LearningGuy]

Mined 1:30 hours with 8700 mh/s on nlpool before server disconnects me and get 0.63 rewards?!
Switched back to antmine till nlpool is stable again.

Perhaps some should consider mining XSH ( Shield ) instead of Verge.....The difficulty is much lower as far as i can see. You can mine shield by changing the c=XVG field to c=XSH.

Using the same pool? Wallet?

[LearningGuy]

Mined 1:30 hours with 8700 mh/s on nlpool before server disconnects me and get 0.63 rewards?!
Switched back to antmine till nlpool is stable again.

Perhaps some should consider mining XSH ( Shield ) instead of Verge.....The difficulty is much lower as far as i can see. You can mine shield by changing the c=XVG field to c=XSH.

Using the same pool? Wallet?

Never mind, created a wallet quick. Seems like a long haul, but I’ll throw my measly rig at it to see how it goes. 😉

[miner582]

2 mine_phun
What about "orphan" blocks?

There is a topic about Orphan blocks already on this forum.

https://bitcointalk.org/index.php?topic=940943.0

The conclusion comes down to: low difficulties ( Like with XVG coin ) + Big hashrates = Orphans ( +/- Duplicate block elsewhere found on the planet at the same time )

It is on our monitor and we are watching it closely. In anyway, other pools experience the same, it's just a matter of luck (or not) and over a period of days it will level out. Secondly, we are far from loss. The pool is running about 135% of what you should get, with orphans.

mine_phun, as advice; why you do open a new thread for nlpool, we are so interested in XVG that we are using Claymore forum to discuss XVG issue? just my 2 cents

[greatauror28]

Just started dual mining XVG with ETH a while ago. However my desktop wallet always say “disconnected”. I fear i might not get it working and my Verge coins will be stuck there.

Anyone has similar problem? Or does anyone have suggestion for a better wallet besides exchanges?

[Vann]

My wallet syncs fine. Use the nodes from here to help it sync.

https://bitcointalk.org/index.php?topic=1433925.msg30113350#msg30113350

[bithead007]

It's time, boys and girls, to box up your graphics cards and put them up for sale before the mad rush as Ethereum (and all Ethash coin) GPU mining is about to come to an end.

"Ethereum ASIC chips will enter mass production stage in February 2018 by TSMC’s 28nm process. The F3 miner is expected to hit the market in Q2 or Q3 2018."
http://news.8btc.com/bitmain-to-release-ethereum-asic-miner-f3-with-72gb-ddr3-dram-in-q2

Reddit chatter saying that it will be roughly the same as building a rig, so 180MH/s for about $2500.  That's what the performance of this asic will be.

Humans suck at predicting the future, so either way you merely have to decide are you going to tear your rigs apart and have nothing for awhile, or forge on until something better emerges and then pivot?  I had ZERO trouble selling an old GTX 970 I didn't want for pretty good cash. All the cards I have now are hot items. Someone will buy them IF I need to sell them.  I don't think I will but I'll wait for the facts. I've got birds in the hand right now.

CJ

[greatauror28]

My wallet syncs fine. Use the nodes from here to help it sync.

https://bitcointalk.org/index.php?topic=1433925.msg30113350#msg30113350

Will this work in the electrum-xvg desktop wallet?

That's what I downloaded from the XVG website and i tried to create a new verge.conf file into the app data folder of XVG but nothing changed - still "Not Connected" status. 

[Vann]

Don't know. I use the Core wallet. This post may help.

https://bitcointalk.org/index.php?topic=1433925.msg30117706#msg30117706

[greatauror28]

Don't know. I use the Core wallet. This post may help.

https://bitcointalk.org/index.php?topic=1433925.msg30117706#msg30117706

You da real MVP.

5 merits for you 

[maomaopop]

I just switched from unimining to antminepool for XVG mining. My coins returns is a lot more than unimining. It seems to me that unimining is leeching tons of our profit. Does anyone has that same findings?

[Ratledge]

Don't know. I use the Core wallet. This post may help.

https://bitcointalk.org/index.php?topic=1433925.msg30117706#msg30117706

I was getting ready to ask if there was some magic sauce.

Am I screwed if I used the Android Verge / TOR wallet and address? I figured that I wanted to disable the feature to gen a new address for each transaction.

I mean it's not the end of the world, I am looking for about ten cents worth and it says "no connection" even five hours after the transaction was confirmed.

[cryptoillusion1]

Don't know. I use the Core wallet. This post may help.

https://bitcointalk.org/index.php?topic=1433925.msg30117706#msg30117706

I was getting ready to ask if there was some magic sauce.

Am I screwed if I used the Android Verge / TOR wallet and address? I figured that I wanted to disable the feature to gen a new address for each transaction.

I mean it's not the end of the world, I am looking for about ten cents worth and it says "no connection" even five hours after the transaction was confirmed.

You also need to download Orbot - then your "no connection " problem will be sorted.
**You need to exit verge, go into your orbot app, apps, check Verge, make sure orbot is running and confirm that you want to start a VPN. Then start verge!

There ! you got your 10 cents back

[ANewbieMiner]

Hi,
Can anyone help me please and give me some info on this error:

NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.
NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.
NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.
NVML API: failed to get device handle 4, error 15.
NVML API: failed to get device handle 5, error 15.

There are 4 1050 cards, and 2 1060 cards on the miner. Latest NVIDIA driver which for both cards is the same. MB: ASUS Z170-A ( I know a piece of crap!). PSU: Two 700W PSUs. One fore MB and 4x 1050 cards. One for 2x 1060 cards (P.S. Oroginally I wrote that there is a 1050W PSU. I mixed it up with another miner. My apologies) . OS: Win10 X64. MSI Afterburner for OC. 80 power limit, CC:+100. MC: +700. Runs at about 50 degree.

I've got lots of miners running stable. But this one works for about 3 days, then the 1060 cards fail, miner restarts, and the 2 1060 cards are gone. When it happens, the 1060 cards look fine physically, and both are fine in Device Manager, but in Afterburner, both cards are frozen without being able to do anything on them. And they are no giving any Hash either obviously. System need to be restarted for them to get fixed.

I'm hosting the system for a third party, the hardware is theirs, but I clean installed the OS, and did everything by the book. Only software issue that I can think of is, that after installing the OS and trying to run it for the first time, Claymore wouldn't start at all which was related to the OpenCL.dll file which for some reason was missing from sys32. I copied the .dll file from an identical system and put it in the miner's sys32 file.

The whole Claymore's log from when the issue seems to start:

18:41:37:870   cc4   ETH - Total Speed: 99.571 Mh/s, Total Shares: 1173, Rejected: 0, Time: 34:22
18:41:37:870   cc4   ETH: GPU0 13.016 Mh/s, GPU1 12.974 Mh/s, GPU2 13.037 Mh/s, GPU3 13.019 Mh/s, GPU4 23.765 Mh/s, GPU5 23.760 Mh/s
18:41:38:355   1738   srv_thr cnt: 1, IP: 192.168.XX.XX
18:41:38:355   1738   recv: 51
18:41:38:355   1738   srv pck: 50
18:41:38:386   1738   srv bs: 0
18:41:38:386   1738   sent: 228
18:41:43:418   b18   srv_thr cnt: 1, IP: 192.168.XX.XX
18:41:43:418   b18   recv: 51
18:41:43:418   b18   srv pck: 50
18:41:43:418   b18   srv bs: 0
18:41:43:418   b18   sent: 228
18:41:43:715   cc4   ETH: checking pool connection...
18:41:43:715   cc4   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:41:43:871   cc4   got 243 bytes
18:41:43:871   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0x281924bac5eb3db7dc8ae3ec8e5d53a2b427e4d1a97082e1d721e2eb47535c16","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:41:43:871   cc4   parse packet: 242
18:41:43:871   cc4   ETH: job is the same
18:41:43:871   cc4   new buf size: 0
18:41:48:465   1338   srv_thr cnt: 1, 192.168.XX.XX
18:41:48:465   1338   recv: 51
18:41:48:465   1338   srv pck: 50
18:41:48:465   1338   srv bs: 0
18:41:48:465   1338   sent: 228
18:41:53:512   260   srv_thr cnt: 1, IP: 192.168.XX.XX
18:41:53:512   260   recv: 51
18:41:53:512   260   srv pck: 50
18:41:53:512   260   srv bs: 0
18:41:53:512   260   sent: 228
18:41:53:731   cc4   ETH: checking pool connection...
18:41:53:731   cc4   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:41:53:888   cc4   got 243 bytes
18:41:53:888   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0x281924bac5eb3db7dc8ae3ec8e5d53a2b427e4d1a97082e1d721e2eb47535c16","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:41:53:888   cc4   parse packet: 242
18:41:53:888   cc4   ETH: job is the same
18:41:53:888   cc4   new buf size: 0
18:41:55:216   cc4   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x5f0ad9b", "0x000000000000000000000000000000000000000000000000000000003835314d"]}

18:41:57:044   1070   GPU0 t=52C fan=46%, GPU1 t=52C fan=46%, GPU2 t=50C fan=45%, GPU3 t=52C fan=50%, GPU4 t=41C fan=22%, GPU5 t=48C fan=38%
18:41:58:560   b44   srv_thr cnt: 1, 192.168.XX.XX
18:41:58:560   b44   recv: 51
18:41:58:560   b44   srv pck: 50
18:41:58:560   b44   srv bs: 0
18:41:58:560   b44   sent: 228
18:41:58:904   18f4   em hbt: 15, fm hbt: 109,
18:41:58:904   18f4   watchdog - thread 0 (gpu0), hb time 140
18:41:58:904   18f4   watchdog - thread 1 (gpu0), hb time 15
18:41:58:904   18f4   watchdog - thread 2 (gpu1), hb time 15
18:41:58:904   18f4   watchdog - thread 3 (gpu1), hb time 140
18:41:58:904   18f4   watchdog - thread 4 (gpu2), hb time 47
18:41:58:904   18f4   watchdog - thread 5 (gpu2), hb time 156
18:41:58:904   18f4   watchdog - thread 6 (gpu3), hb time 93
18:41:58:904   18f4   watchdog - thread 7 (gpu3), hb time 203
18:41:58:904   18f4   watchdog - thread 8 (gpu4), hb time 156
18:41:58:904   18f4   watchdog - thread 9 (gpu4), hb time 31
18:41:58:904   18f4   watchdog - thread 10 (gpu5), hb time 31
18:41:58:904   18f4   watchdog - thread 11 (gpu5), hb time 140
18:42:00:591   cc4   got 243 bytes
18:42:00:591   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0xa23a079378889763907051a78499d9f150a6a0a12fd8d935b1620f7db6792159","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:00:591   cc4   parse packet: 242
18:42:00:591   cc4   ETH: job changed
18:42:00:591   cc4   new buf size: 0
18:42:00:591   cc4   ETH: 02/18/18-18:42:00 - New job from eth-eu1.nanopool.org:9999
18:42:00:591   cc4   target: 0x000000006df37f67 (diff: 10000MH), epoch 170(2.33GB)
18:42:00:591   cc4   ETH - Total Speed: 99.597 Mh/s, Total Shares: 1173, Rejected: 0, Time: 34:22
18:42:00:591   cc4   ETH: GPU0 12.936 Mh/s, GPU1 13.038 Mh/s, GPU2 13.033 Mh/s, GPU3 13.032 Mh/s, GPU4 23.778 Mh/s, GPU5 23.780 Mh/s
18:42:05:514   cc4   ETH: checking pool connection...
18:42:05:514   cc4   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:42:05:529   cac   srv_thr cnt: 1, 192.168.XXX.XXX
18:42:05:529   cac   recv: 51
18:42:05:529   cac   srv pck: 50
18:42:05:701   cac   NVML: cannot get current temperature, error 15
18:42:05:686   cc4   got 243 bytes
18:42:05:748   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0xa23a079378889763907051a78499d9f150a6a0a12fd8d935b1620f7db6792159","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:05:748   cc4   parse packet: 242
18:42:05:748   cc4   ETH: job is the same
18:42:05:748   cc4   new buf size: 0
18:42:05:764   f34   GPU 2, GpuMiner cu_k1 failed 30, unknown error
18:42:05:779   188   GPU 5, GpuMiner cu_k1 failed 30, unknown error
18:42:05:779   127c   GPU 3, GpuMiner cu_k1 failed 30, unknown error
18:42:05:779   134   GPU 0, GpuMiner cu_k1 failed 30, unknown error
18:42:05:779   e5c   GPU 1, GpuMiner cu_k1 failed 30, unknown error
18:42:05:779   f34   GPU 2, GpuMiner kx failed 1
18:42:05:779   188   GPU 5, GpuMiner kx failed 1
18:42:05:779   127c   GPU 3, GpuMiner kx failed 1
18:42:05:779   134   GPU 0, GpuMiner kx failed 1
18:42:06:123   e5c   GPU 1, GpuMiner kx failed 1
18:42:06:123   e5c   Set global fail flag, failed GPU1
18:42:06:123   e5c   GPU 1 failed
18:42:06:123   cac   NVML: cannot get fan speed, error 15
18:42:05:779   127c   Set global fail flag, failed GPU3
18:42:06:123   127c   GPU 3 failed
18:42:05:779   f34   Set global fail flag, failed GPU2
18:42:06:123   f34   GPU 2 failed
18:42:06:123   e40   GPU 4, GpuMiner cu_k1 failed 30, unknown error
18:42:06:123   e40   GPU 4, GpuMiner kx failed 1
18:42:06:139   cac   NVML: cannot get current temperature, error 15
18:42:05:779   188   Set global fail flag, failed GPU5
18:42:06:170   1390   GPU 3, GpuMiner cu_k1 failed 30, unknown error
18:42:06:123   134   Set global fail flag, failed GPU0
18:42:06:186   134   GPU 0 failed
18:42:06:201   188   GPU 5 failed
18:42:06:217   1390   GPU 3, GpuMiner kx failed 1
18:42:06:248   f0c   GPU 2, GpuMiner cu_k1 failed 30, unknown error
18:42:06:358   177c   GPU 1, GpuMiner cu_k1 failed 30, unknown error
18:42:06:139   e40   Set global fail flag, failed GPU4
18:42:06:404   11c8   GPU 0, GpuMiner cu_k1 failed 30, unknown error
18:42:06:404   11c8   GPU 0, GpuMiner kx failed 1
18:42:06:404   177c   GPU 1, GpuMiner kx failed 1
18:42:06:404   f0c   GPU 2, GpuMiner kx failed 1
18:42:06:248   1390   Set global fail flag, failed GPU3
18:42:06:404   17fc   GPU 5, GpuMiner cu_k1 failed 30, unknown error
18:42:06:404   cac   NVML: cannot get fan speed, error 15
18:42:06:451   12d8   GPU 4, GpuMiner cu_k1 failed 30, unknown error
18:42:06:451   e40   GPU 4 failed
18:42:06:451   cac   srv bs: 0
18:42:06:467   cac   sent: 220
18:42:06:483   1070   NVML: cannot get current temperature, error 15
18:42:06:483   1070   NVML: cannot get fan speed, error 15
18:42:06:498   1070   NVML: cannot get current temperature, error 15
18:42:06:498   1070   NVML: cannot get fan speed, error 15
18:42:06:498   12d8   GPU 4, GpuMiner kx failed 1
18:42:06:514   12d8   Set global fail flag, failed GPU4
18:42:06:404   11c8   Set global fail flag, failed GPU0
18:42:06:404   177c   Set global fail flag, failed GPU1
18:42:06:404   f0c   Set global fail flag, failed GPU2
18:42:06:654   f0c   GPU 2 failed
18:42:06:733   11c8   GPU 0 failed
18:42:06:811   12d8   GPU 4 failed
18:42:06:858   17fc   GPU 5, GpuMiner kx failed 1
18:42:06:858   17fc   Set global fail flag, failed GPU5
18:42:06:905   177c   GPU 1 failed
18:42:06:951   1390   GPU 3 failed
18:42:06:983   17fc   GPU 5 failed
18:42:08:655   498   srv_thr cnt: 1, 192.168.XX.XX
18:42:08:670   498   recv: 51
18:42:08:670   498   srv pck: 50
18:42:08:670   498   NVML: cannot get current temperature, error 15
18:42:08:670   498   NVML: cannot get fan speed, error 15
18:42:08:670   498   NVML: cannot get current temperature, error 15
18:42:08:670   498   NVML: cannot get fan speed, error 15
18:42:08:670   498   srv bs: 0
18:42:08:670   498   sent: 196
18:42:09:514   1070   NVML: cannot get current temperature, error 15
18:42:09:514   1070   NVML: cannot get fan speed, error 15
18:42:09:514   1070   NVML: cannot get current temperature, error 15
18:42:09:514   1070   NVML: cannot get fan speed, error 15
18:42:12:530   1070   NVML: cannot get current temperature, error 15
18:42:12:530   1070   NVML: cannot get fan speed, error 15
18:42:12:530   1070   NVML: cannot get current temperature, error 15
18:42:12:530   1070   NVML: cannot get fan speed, error 15
18:42:13:718   1094   srv_thr cnt: 1, 192.168.XX.XX
18:42:13:718   1094   recv: 51
18:42:13:718   1094   srv pck: 50
18:42:13:718   1094   NVML: cannot get current temperature, error 15
18:42:13:718   1094   NVML: cannot get fan speed, error 15
18:42:13:718   1094   NVML: cannot get current temperature, error 15
18:42:13:718   1094   NVML: cannot get fan speed, error 15
18:42:13:718   1094   srv bs: 0
18:42:13:718   1094   sent: 196
18:42:15:077   cc4   got 243 bytes
18:42:15:077   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0x630ddc19229b1c3ff095b3c657a3b8d4ceae04cabbf2548f6d9611dfad8a5209","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:15:077   cc4   parse packet: 242
18:42:15:077   cc4   ETH: job changed
18:42:15:077   cc4   new buf size: 0
18:42:15:077   cc4   ETH: 02/18/18-18:42:15 - New job from eth-eu1.nanopool.org:9999
18:42:15:077   cc4   target: 0x000000006df37f67 (diff: 10000MH), epoch 170(2.33GB)
18:42:15:077   cc4   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1173, Rejected: 0, Time: 34:22
18:42:15:077   cc4   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
18:42:15:234   cc4   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0", "0x000000000000000000000000000000000000000000000000000000003835314d"]}

18:42:15:530   cc4   ETH: checking pool connection...
18:42:15:530   cc4   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:42:15:546   1070   NVML: cannot get current temperature, error 15
18:42:15:546   1070   NVML: cannot get fan speed, error 15
18:42:15:546   1070   NVML: cannot get current temperature, error 15
18:42:15:546   1070   NVML: cannot get fan speed, error 15
18:42:15:702   cc4   got 243 bytes
18:42:15:702   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0x630ddc19229b1c3ff095b3c657a3b8d4ceae04cabbf2548f6d9611dfad8a5209","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:15:702   cc4   parse packet: 242
18:42:15:702   cc4   ETH: job is the same
18:42:15:702   cc4   new buf size: 0
18:42:18:562   1070   NVML: cannot get current temperature, error 15
18:42:18:562   1070   NVML: cannot get fan speed, error 15
18:42:18:562   1070   NVML: cannot get current temperature, error 15
18:42:18:562   1070   NVML: cannot get fan speed, error 15
18:42:18:765   f58   srv_thr cnt: 1, 192.168.XX.XX
18:42:18:765   f58   recv: 51
18:42:18:765   f58   srv pck: 50
18:42:18:765   f58   NVML: cannot get current temperature, error 15
18:42:18:765   f58   NVML: cannot get fan speed, error 15
18:42:18:765   f58   NVML: cannot get current temperature, error 15
18:42:18:765   f58   NVML: cannot get fan speed, error 15
18:42:18:765   f58   srv bs: 0
18:42:18:765   f58   sent: 196
18:42:21:578   1070   NVML: cannot get current temperature, error 15
18:42:21:578   1070   NVML: cannot get fan speed, error 15
18:42:21:578   1070   NVML: cannot get current temperature, error 15
18:42:21:578   1070   NVML: cannot get fan speed, error 15
18:42:23:141   cc4   got 243 bytes
18:42:23:141   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0x64ee3f3e4661af1c08a9d78d8d4c3f4af860ef089324ff294a9e2b836f087f9b","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:23:141   cc4   parse packet: 242
18:42:23:141   cc4   ETH: job changed
18:42:23:141   cc4   new buf size: 0
18:42:23:141   cc4   ETH: 02/18/18-18:42:23 - New job from eth-eu1.nanopool.org:9999
18:42:23:141   cc4   target: 0x000000006df37f67 (diff: 10000MH), epoch 170(2.33GB)
18:42:23:141   cc4   ETH - Total Speed: 0.000 Mh/s, Total Shares: 1173, Rejected: 0, Time: 34:22
18:42:23:141   cc4   ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s
18:42:23:813   1974   srv_thr cnt: 1, IP: 192.168.XX.XX
18:42:23:813   1974   recv: 51
18:42:23:813   1974   srv pck: 50
18:42:23:813   1974   NVML: cannot get current temperature, error 15
18:42:23:813   1974   NVML: cannot get fan speed, error 15
18:42:23:813   1974   NVML: cannot get current temperature, error 15
18:42:23:813   1974   NVML: cannot get fan speed, error 15
18:42:23:813   1974   srv bs: 0
18:42:23:813   1974   sent: 196
18:42:24:594   1070   NVML: cannot get current temperature, error 15
18:42:24:594   1070   NVML: cannot get fan speed, error 15
18:42:24:594   1070   NVML: cannot get current temperature, error 15
18:42:24:594   1070   NVML: cannot get fan speed, error 15
18:42:25:547   cc4   ETH: checking pool connection...
18:42:25:547   cc4   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:42:25:703   cc4   got 243 bytes
18:42:25:703   cc4   buf: {"jsonrpc":"2.0","id":0,"result":["0x64ee3f3e4661af1c08a9d78d8d4c3f4af860ef089324ff294a9e2b836f087f9b","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:25:703   cc4   parse packet: 242
18:42:25:703   cc4   ETH: job is the same
18:42:25:703   cc4   new buf size: 0
18:42:27:610   1070   NVML: cannot get current temperature, error 15
18:42:27:610   1070   NVML: cannot get fan speed, error 15
18:42:27:610   1070   NVML: cannot get current temperature, error 15
18:42:27:610   1070   NVML: cannot get fan speed, error 15
18:42:27:610   1070   NVML: cannot get current temperature, error 15
18:42:27:610   1070   NVML: cannot get fan speed, error 15
18:42:27:610   1070   NVML: cannot get current temperature, error 15
18:42:27:610   1070   NVML: cannot get fan speed, error 15
18:42:27:610   1070   GPU0 t=36C fan=45%, GPU1 t=35C fan=45%, GPU2 t=34C fan=45%, GPU3 t=35C fan=45%, GPU4 t=0C fan=0%, GPU5 t=0C fan=0%
18:42:28:860   478   srv_thr cnt: 1, 192.168.XX.XX
18:42:28:860   478   recv: 51
18:42:28:860   478   srv pck: 50
18:42:28:860   478   NVML: cannot get current temperature, error 15
18:42:28:860   478   NVML: cannot get fan speed, error 15
18:42:28:860   478   NVML: cannot get current temperature, error 15
18:42:28:860   478   NVML: cannot get fan speed, error 15
18:42:28:860   478   srv bs: 0
18:42:28:860   478   sent: 196
18:42:30:626   1070   NVML: cannot get current temperature, error 15
18:42:30:626   1070   NVML: cannot get fan speed, error 15
18:42:30:626   1070   NVML: cannot get current temperature, error 15
18:42:30:626   1070   NVML: cannot get fan speed, error 15
18:42:33:642   1070   NVML: cannot get current temperature, error 15
18:42:33:642   1070   NVML: cannot get fan speed, error 15
18:42:33:642   1070   NVML: cannot get current temperature, error 15
18:42:33:642   1070   NVML: cannot get fan speed, error 15
18:42:33:845   18f4   em hbt: 16, fm hbt: 47,
18:42:33:845   18f4   watchdog - thread 0 (gpu0), hb time 28203
18:42:33:845   18f4   watchdog - thread 1 (gpu0), hb time 29438
18:42:33:845   18f4   watchdog - thread 2 (gpu1), hb time 28188
18:42:33:845   18f4   watchdog - thread 3 (gpu1), hb time 28313
18:42:33:845   18f4   watchdog - thread 4 (gpu2), hb time 28219
18:42:33:845   18f4   watchdog - thread 5 (gpu2), hb time 28344
18:42:33:845   18f4   watchdog - thread 6 (gpu3), hb time 28328
18:42:33:845   18f4   watchdog - thread 7 (gpu3), hb time 28203
18:42:33:845   18f4   watchdog - thread 8 (gpu4), hb time 30672
18:42:33:845   18f4   watchdog - thread 9 (gpu4), hb time 30781
18:42:33:845   18f4   watchdog - thread 10 (gpu5), hb time 30766
18:42:33:845   18f4   watchdog - thread 11 (gpu5), hb time 30656
18:42:33:845   18f4   WATCHDOG: GPU error, you need to restart miner
18:42:33:845   18f4   NVML: cannot get current temperature, error 15
18:42:33:845   18f4   NVML: cannot get fan speed, error 15
18:42:33:845   18f4   NVML: cannot get current temperature, error 15
18:42:33:845   18f4   NVML: cannot get fan speed, error 15
18:42:35:079   18f4   Restarting OK, exit...



8:42:37:650   600   Check and remove old log files...
18:42:37:650   600   args: -epool eth-eu1.nanopool.org:9999 -ewal
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX -mode 1 -ftime 10
18:42:37:650   600   
18:42:37:650   600   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
18:42:37:650   600   º                Claymore's Dual GPU Miner - v11.0               º
18:42:37:650   600   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
18:42:37:650   600   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
18:42:37:650   600   
18:42:37:665   600   b501
18:42:37:884   600   ETH: 6 pools are specified
18:42:37:884   600   Main Ethereum pool is eth-eu1.nanopool.org:9999
18:42:38:353   600   OpenCL platform: NVIDIA CUDA
18:42:38:353   600   AMD OpenCL platform not found
18:42:38:822   600   CUDA initializing...

18:42:38:822   600   NVIDIA Cards available: 4
18:42:38:822   600   CUDA Driver Version/Runtime Version: 9.1/8.0
18:42:38:837   600   GPU #0: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1  (pci bus 1:0:0)

18:42:38:837   600   GPU #1: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1  (pci bus 2:0:0)

18:42:38:837   600   GPU #2: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1  (pci bus 3:0:0)

18:42:38:837   600   GPU #3: GeForce GTX 1050 Ti, 4096 MB available, 6 compute units, capability: 6.1  (pci bus 7:0:0)

18:42:38:837   600   Total cards: 4
18:42:42:916   600   No AMD cards in the list, ADL library will not be used.
18:42:42:916   600   NVML version: 9.390.77
18:42:42:978   600   NVML API: failed to get device handle 4, error 15.
18:42:42:978   600   NVML API: failed to get device handle 5, error 15.
18:42:42:978   600   NVML API: failed to get device handle 4, error 15.
18:42:42:978   600   NVML API: failed to get device handle 5, error 15.
18:42:42:978   600   NVML API: failed to get device handle 4, error 15.
18:42:42:978   600   NVML API: failed to get device handle 5, error 15.
18:42:42:978   600   NVML API: failed to get device handle 4, error 15.
18:42:42:978   600   NVML API: failed to get device handle 5, error 15.
18:42:43:474   1064   ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <213.32.29.168> port 9999
18:42:43:583   600   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

18:42:43:583   600   ETH: eth-proxy stratum mode
18:42:43:583   600   Watchdog enabled
18:42:43:583   600   Remote management (READ-ONLY MODE) is enabled on port 3333
18:42:43:583   600   

18:42:43:630   1064   send: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"], "id": 2, "method": "eth_submitLogin"}

18:42:43:630   1064   ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
18:42:43:818   1064   got 282 bytes
18:42:43:818   1064   buf: {"jsonrpc":"2.0","id":2,"result":true}
{"jsonrpc":"2.0","id":0,"result":["0x2923145ddbff2d14d72a0f314075ddde33289e1c7acbb8cfc9acd22741d7a17e","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:43:818   1064   parse packet: 38
18:42:43:818   1064   ETH: Authorized
18:42:43:818   1064   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:42:43:818   1064   remove first packet 243
18:42:43:818   1064   new buf size: 243
18:42:43:818   1064   parse packet: 242
18:42:43:818   1064   ETH: job changed
18:42:43:818   1064   new buf size: 0
18:42:43:849   1a50   Setting DAG epoch #170...
18:42:43:990   1064   got 243 bytes
18:42:43:990   1064   buf: {"jsonrpc":"2.0","id":0,"result":["0x2923145ddbff2d14d72a0f314075ddde33289e1c7acbb8cfc9acd22741d7a17e","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:43:990   1064   parse packet: 242
18:42:43:990   1064   ETH: job is the same
18:42:43:990   1064   new buf size: 0
18:42:46:037   50c   Setting DAG epoch #170 for GPU1
18:42:46:037   1a50   Setting DAG epoch #170 for GPU3
18:42:46:037   1a50   Create GPU buffer for GPU3
18:42:46:037   a14   Setting DAG epoch #170 for GPU2
18:42:46:037   58c   Setting DAG epoch #170 for GPU0
18:42:46:037   a14   Create GPU buffer for GPU2
18:42:46:037   50c   Create GPU buffer for GPU1
18:42:46:037   58c   Create GPU buffer for GPU0
18:42:47:928   384   srv_thr cnt: 1, IP: 192.168.XXX.XXX
18:42:47:943   384   recv: 51
18:42:47:943   384   srv pck: 50
18:42:47:943   384   srv bs: 0
18:42:47:943   384   sent: 170
18:42:48:990   10e0   srv_thr cnt: 1, IP: 192.168.XXX.XXX
18:42:48:990   10e0   recv: 51
18:42:48:990   10e0   srv pck: 50
18:42:48:990   10e0   srv bs: 0
18:42:49:006   10e0   sent: 170
18:42:53:835   1064   ETH: checking pool connection...
18:42:53:835   1064   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:42:53:991   1064   got 243 bytes
18:42:53:991   1064   buf: {"jsonrpc":"2.0","id":0,"result":["0x2923145ddbff2d14d72a0f314075ddde33289e1c7acbb8cfc9acd22741d7a17e","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:42:53:991   1064   parse packet: 242
18:42:53:991   1064   ETH: job is the same
18:42:53:991   1064   new buf size: 0
18:42:54:038   13f8   srv_thr cnt: 1, IP: 192.168.XXX.XXX
18:42:54:038   13f8   recv: 51
18:42:54:038   13f8   srv pck: 50
18:42:54:038   13f8   srv bs: 0
18:42:54:038   13f8   sent: 170
18:42:59:069   7d4   srv_thr cnt: 1, IP: 192.168.XXX.XXX
18:42:59:069   7d4   recv: 51
18:42:59:069   7d4   srv pck: 50
18:42:59:069   7d4   srv bs: 0
18:42:59:069   7d4   sent: 170
18:43:00:195   50c   GPU1 DAG creation time - 13928 ms
18:43:00:195   50c   Setting DAG epoch #170 for GPU1 done
18:43:00:398   58c   GPU0 DAG creation time - 14032 ms
18:43:00:398   58c   Setting DAG epoch #170 for GPU0 done
18:43:00:445   1a50   GPU3 DAG creation time - 14003 ms
18:43:00:445   1a50   Setting DAG epoch #170 for GPU3 done
18:43:00:445   a14   GPU2 DAG creation time - 14037 ms
18:43:00:445   a14   Setting DAG epoch #170 for GPU2 done
18:43:03:632   1064   got 243 bytes
18:43:03:632   1064   buf: {"jsonrpc":"2.0","id":0,"result":["0xc998a3e3ccf78c4d8558bdc2848fbb02f6e884711540eb791981ef2d8e0a2a6f","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:43:03:632   1064   parse packet: 242
18:43:03:632   1064   ETH: job changed
18:43:03:632   1064   new buf size: 0
18:43:03:632   1064   ETH: 02/18/18-18:43:03 - New job from eth-eu1.nanopool.org:9999
18:43:03:632   1064   target: 0x000000006df37f67 (diff: 10000MH), epoch 170(2.33GB)
18:43:03:632   1064   ETH - Total Speed: 51.898 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
18:43:03:632   1064   ETH: GPU0 12.932 Mh/s, GPU1 12.991 Mh/s, GPU2 12.986 Mh/s, GPU3 12.989 Mh/s
18:43:03:836   1064   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x31884f1", "0x000000000000000000000000000000000000000000000000000000004cddc83f"]}

18:43:03:851   1064   ETH: checking pool connection...
18:43:03:851   1064   send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

18:43:04:101   8fc   srv_thr cnt: 1, IP: 192.168.XXX.XXX
18:43:04:101   8fc   recv: 51
18:43:04:101   8fc   srv pck: 50
18:43:04:101   8fc   srv bs: 0
18:43:04:101   8fc   sent: 190
18:43:04:195   1064   got 243 bytes
18:43:04:195   1064   buf: {"jsonrpc":"2.0","id":0,"result":["0xc998a3e3ccf78c4d8558bdc2848fbb02f6e884711540eb791981ef2d8e0a2a6f","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:43:04:195   1064   parse packet: 242
18:43:04:195   1064   ETH: job is the same
18:43:04:195   1064   new buf size: 0
18:43:08:039   bf4   GPU0 t=45C fan=45%, GPU1 t=44C fan=45%, GPU2 t=43C fan=45%, GPU3 t=45C fan=45%
18:43:09:164   136c   srv_thr cnt: 1, IP: 192.168.XXX.XXX
18:43:09:164   136c   recv: 51
18:43:09:164   136c   srv pck: 50
18:43:09:164   136c   srv bs: 0
18:43:09:164   136c   sent: 190
18:43:09:758   1064   got 243 bytes
18:43:09:758   1064   buf: {"jsonrpc":"2.0","id":0,"result":["0xc772cea755b1dd6a9037337e7c38f4c29a47e9ae52e6c509c347cfc2617ca9a0","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

18:43:09:758   1064   parse packet: 242
18:43:09:758   1064   ETH: job changed
18:43:09:758   1064   new buf size: 0
18:43:09:758   1064   ETH: 02/18/18-18:43:09 - New job from eth-eu1.nanopool.org:9999
18:43:09:758   1064   target: 0x000000006df37f67 (diff: 10000MH), epoch 170(2.33GB)
18:43:09:758   1064   ETH - Total Speed: 51.955 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
18:43:09:758   1064   ETH: GPU0 12.985 Mh/s, GPU1 12.994 Mh/s, GPU2 12.990 Mh/s, GPU3 12.986 Mh/s