Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[cuongmn64]

I make around 330Gh/s Dual mining Verge, what are the estimated coins I should be receiving per day ?

I use whattomine to check but it show an insane amount   

Around 2000 Verge a day.

Your pool is awesome dude!! I can't believe I can find a working pool that not stealing from us like that piece of shit unimining. Please keep this up and we will make this pool the #1 XVG pool.

To everyone: if you're using unimining switch to this! unimining gives you like 50% of the earning.

[1713874935]

1713874935

[Andrey123]

Hey.
I correctly understand, now in the dual it is possible to mine only these coins: Decred, Siacoin, Lbry, Pascal, Blake2s, Keccak?
I can not find the normal coins for these algorithms(

[mshordja]

now the pool http://nlpool.nl/ is down, maybe is not so stable 

[djmuler]

Damn it
please fix your pool nlpool

B2S: Stratum - Connected (mine.nlpool.nl:5766)


B2S: Authorization failed
: [
   21,
   "Serverfull",
   null
]
Socket was closed remotely (by pool)
 B2S: Job timeout, disconnect, retry in 20 sec...

[MekMekPL]

i think we need a new topic for NLPOOL - XVG pool.

This is gettting to much info here that is not realted directly with Claymore's miner.

The pool works now, it was down for 10 or so minutes - probably service.

The pool has grown quite a bit and i think admin need to reconfigure - add some power...

EVEN with 20% downtime is much better to mine with it than unimining that takes 50% ;-)

[kgminer]

Dear Miners

Has anyone tried to mine XSH?

I have tried the following two pools

stratum+tcp://pool.bilbotel.fr:5766 -dwal <Wallet> -dcoin blake2s -dpsw c=XSH
stratum+tcp://s.antminepool.com:5766 -dwal <Wallet> -dcoin blake2s -dpsw c=XSH

Getting the same error on both pools

```
00:54:02:618   1320    B2S: Stratum - Connected (pool.bilbotel.fr:5766)
00:54:02:899   1320   got 131 bytes
00:54:02:899   1320   buf: {"id":1,"result":[[["mining.set_difficulty","1"],["mining.notify","0c7a59d511030fe54c9d58e3508252bc"]],"810117b1",4],"error":null}

00:54:02:899   1320   parse packet: 130
00:54:02:899   1320   new buf size: 0
00:54:03:227   1320   got 36 bytes
00:54:03:227   1320   buf: {"id":5,"result":true,"error":null}

00:54:03:243   1320   parse packet: 35
00:54:03:259   1320   new buf size: 0
00:54:03:290   1320   got 37 bytes
00:54:03:290   1a20   got 243 bytes
00:54:03:290   1320   buf: {"id":2,"result":false,"error":null}

00:54:03:290   1a20   buf: {"jsonrpc":"2.0","id":0,"result":["0x8d2b51dee07a670e515ddad9f185298ee6c64e07c044f02073e8b0ff6d139997","0x4e99a30e99712c8c6e292fe7ba6b27a37c7ced12e2ec7862f31fb676724cb404","0x000000006df37f675ef6eadf5ab9a2072d44268d97df837e6748956e5c6c2116"]}

00:54:03:306   1320   parse packet: 36
00:54:03:306   1a20   parse packet: 242
00:54:03:321   1320    B2S: Authorization failed
: (null)

```

I thought it's problem with the exchange wallet so even tried using local wallet.

Any thoughts?

[thildp]

Which exchange you guys are using to put your XVG? Cryptopia is fucked since 02/15, no signal of return...

[Hodlmyhand]

Which exchange you guys are using to put your XVG? Cryptopia is fucked since 02/15, no signal of return...

Bittrex

[drotor]

Hello folks, I am using Claymore 11 and Ethos and am having the following issue:

Random number of rigs are decreasing their hashing to 0 and starting all over again. This is what happens with the reported hashrate to the pool (check the irregular black line - the reported hashrate in the pool in the first two images, the other images are representing the problem in the Ethos remote config file)
https://imgur.com/a/2Zx2f

This was happenning at the beginning during random time (black line in top pool image in the link above), but now (since many tests and restarts) it seems it happens every hour (bottom pool image).

I thought at the beginning that the problem is in the network, but it seems it is not, bacause I made many tests with the network: At the beginning I was using 2 ISPs (with fixed IPs) connected to one dual wan router, after them I connected 2 more routers one after the other, and after that 3 basic 8-port 100 mbps unmanaged switches that connected to the 13 rigs, but now I am using 2 independent networks with 3 rigs on one of the networks and the rest of the rigs on the other network, with direct connection from router to switch. I have changed the 3 switches with one 24 port switch and again I do have this problem every hour.

This problem occured when I upgraded from 8 to 13 rigs at the beginning of February.

I spoke with the folks from Ethos support and explained them all about the network, I told them the brands and models of the network devices that I am using and they said that the devices seems to be ok as quality for 13 rigs network (now 10 rigs network is with dual wan router https://www.tp-link.com/us/products/details/cat-4909_TL-ER6020.html and http://www.dlink.com/uk/en/products/des-1024d-24-port-10-100mbps-desktop-switch, before the dual wan router there is one HUAWEI router of the ISP that is configured as a bridge with fixed IP). The Ethos support folks suggested that I update Claymore from 10.2 to 11, but it didn't help. They also suggested that I add this line to the Ethos remote config file:
"claymore=flags -nofee 1" in order to check the if the problem is not in the DNS setting.

As far as I understand from the beginning of this thread, this line disables the dev fee. By putting this line my rigs stabilized but hashed 4% less as it is explained in the 1st post.

Any ideas how to fix this unstability problem?

It seems that this guy from Reddit had similar issue:
https://www.reddit.com/r/EtherMining/comments/6glgii/are_you_using_the_nofee_comm_in_claymore_miner/

[bulgar73]

I make around 330Gh/s Dual mining Verge, what are the estimated coins I should be receiving per day ?

I use whattomine to check but it show an insane amount   

Around 2000 Verge a day.

Your pool is awesome dude!! I can't believe I can find a working pool that not stealing from us like that piece of shit unimining. Please keep this up and we will make this pool the #1 XVG pool.

To everyone: if you're using unimining switch to this! unimining gives you like 50% of the earning.

which pool ?

[fanisk21]

I make around 330Gh/s Dual mining Verge, what are the estimated coins I should be receiving per day ?

I use whattomine to check but it show an insane amount   

Around 2000 Verge a day.

Your pool is awesome dude!! I can't believe I can find a working pool that not stealing from us like that piece of shit unimining. Please keep this up and we will make this pool the #1 XVG pool.

To everyone: if you're using unimining switch to this! unimining gives you like 50% of the earning.

which pool ?

nlpool.nl . But they are having problems getting stable connections of miners. Anyways, is better than unimining.

[bulgar73]

I make around 330Gh/s Dual mining Verge, what are the estimated coins I should be receiving per day ?

I use whattomine to check but it show an insane amount   

Around 2000 Verge a day.

Your pool is awesome dude!! I can't believe I can find a working pool that not stealing from us like that piece of shit unimining. Please keep this up and we will make this pool the #1 XVG pool.

To everyone: if you're using unimining switch to this! unimining gives you like 50% of the earning.

which pool ?

nlpool.nl . But they are having problems getting stable connections of miners. Anyways, is better than unimining.

yes, I mine there with 90GH, many disconnections ....

[fanisk21]

It's down again 

[mshordja]

It's down again 

yes and don't know if they will fix soon 

[RYXES]

Checked out 11.0 finally.

My hash rate went up by 29.89 to 30.08 (0.6%)

I solo mine Ethereum / Pirl.

Kept getting GPU's that crashed individually and actually overheated my cables.

May of been a coincidence as all drivers and OS updated the same day.

Will stick to 10.0 for now until i can tweak a rig to be comfortable and stable. We'll see.

[timotybg]

Hey.
I correctly understand, now in the dual it is possible to mine only these coins: Decred, Siacoin, Lbry, Pascal, Blake2s, Keccak?
I can not find the normal coins for these algorithms(

Nope, Siacoin is actually ASIC mined now and it is simply worthless to go with GPU : https://siastats.info/mining

[Blynda]

Hi, I'm trying to dual mine eth and xvg. At first it was good , then restarted rigs and it says B2S: job time out, retry in 20s. Any suggestions ?
 Using antminepool

Config:
-wd 1 -r 1 -epool stratum+tcp://eu1.ethermine.org:4444 -ewal ................. -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 -dpool stratum+tcp://s.antminepool.com:9008 -dwal ................... -dcoin blake2s -dpsw c=XVG -dcri 40

[Intristing]

Hi, I'm trying to dual mine eth and xvg. At first it was good , then restarted rigs and it says B2S: job time out, retry in 20s. Any suggestions ?
 Using antminepool

Config:
-wd 1 -r 1 -epool stratum+tcp://eu1.ethermine.org:4444 -ewal ................. -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 -dpool stratum+tcp://s.antminepool.com:9008 -dwal ................... -dcoin blake2s -dpsw c=XVG -dcri 40

that is not the fault of you miner. It is the disconnection from the Pool. Try different pool.

[Blynda]

Hi, I'm trying to dual mine eth and xvg. At first it was good , then restarted rigs and it says B2S: job time out, retry in 20s. Any suggestions ?
 Using antminepool

Config:
-wd 1 -r 1 -epool stratum+tcp://eu1.ethermine.org:4444 -ewal ................. -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 -dpool stratum+tcp://s.antminepool.com:9008 -dwal ................... -dcoin blake2s -dpsw c=XVG -dcri 40

that is not the fault of you miner. It is the disconnection from the Pool. Try different pool.

But now one of three rigs mines on the same pool with same config. I don't get why

[Blynda]

Hi, I'm trying to dual mine eth and xvg. At first it was good , then restarted rigs and it says B2S: job time out, retry in 20s. Any suggestions ?
 Using antminepool

Config:
-wd 1 -r 1 -epool stratum+tcp://eu1.ethermine.org:4444 -ewal ................. -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333 -dpool stratum+tcp://s.antminepool.com:9008 -dwal ................... -dcoin blake2s -dpsw c=XVG -dcri 40

that is not the fault of you miner. It is the disconnection from the Pool. Try different pool.

But now one of three rigs mines on the same pool with same config. I don't get why

Yep, it's pool fault