Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[jwhat]

I've got some updates:

1. I finally set my undervolting to 800v for all 8 GPUs. Why did this take me so long to do?
2. Antminepool seems to be down (XVG), so switched to unimining. Still just these 3 pools for XVG?

[1714055230]

1714055230

[1714055230]

1714055230

[1714055230]

1714055230

[greatauror28]

I've got some updates:

1. I finally set my undervolting to 800v for all 8 GPUs. Why did this take me so long to do?
2. Antminepool seems to be down (XVG), so switched to unimining. Still just these 3 pools for XVG?

Wow, 800mV? Report back if it's stable - i'm pretty sure it won't be 

Lowest undervolt i've applied is 825mV and that's for a 580 Gaming X that hashes 30Mh.

Curious what cards are these and what OS.

[Metroid]

Wow, 800mV? Report back if it's stable - i'm pretty sure it won't be 

I set some rx 570 of my friend to 766mv, clock 1100. Stable so far.

[jwhat]

I've got some updates:

1. I finally set my undervolting to 800v for all 8 GPUs. Why did this take me so long to do?
2. Antminepool seems to be down (XVG), so switched to unimining. Still just these 3 pools for XVG?

Wow, 800mV? Report back if it's stable - i'm pretty sure it won't be 

Lowest undervolt i've applied is 825mV and that's for a 580 Gaming X that hashes 30Mh.

Curious what cards are these and what OS.

Nope, wasn't stable...

[browned]

@mine_Phun
Same problem here- mining XVG only and it shows XSH and XVG

1. So will the XSH showing on the website be converted to XVG

2. Also i see a XSH wallet address with some balance - But this wallet does not belong to me- I only have a XVG wallet
what is this XSH wallet?

see https://ibb.co/cW6ji7

Hmm that's my xsh address. Wonder if they can get it to the right place.

nlpool still seem to be having issues. I just got a shield reward on my verge address. Also my miner details are no longer showing up.

Seems the restore hasn't fixed anything.

[nitrobg]

all these pools are trash the http://mine.nlpool.nl , been up and down all day , crashing my damn rigs with thier bull shit

umining are straight up thieves , somone like nanopool needs to start a legit pool

Probably rival pools are dns attacking nlpool. Best thing right now is solo mining until a good pool like nanopool adds xvg.

Solo mining is pointless unless you have a shitton of hashpower.

[Metroid]

Solo mining is pointless unless you have a shitton of hashpower.

You have to work this way, if you get lets say 30 xvg per day and the block reward is 1500 then to find a block you will need 50 days more or less, estimate. Now given the luck, you could find a block in few seconds to infinite amount of days.

[ohmdoctor]

windows defender spotted goddam trojans and malware in your Zip File!
winbit coin trojans!!!

Yeah shit might as well stop mining man.

[kgminer]

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

[Efemen]

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

Did you mine other Blake2S successfully? If not, then the setting is not right.

[Lukke]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

No it is not running stable. It is disconnecting and affecting stability of ETH mining as well. Check my screenshot - hashrate was on zero hour ago!!
https://s9.postimg.org/xh55yptpr/hashrate.png

[djmuler]

To avoid most of questions:

NLpool restored from backup this night. This means that we placed a full backup back of 24 hours ago, and your earnings are not visible anymore on the website.

However, the old server is still running and will finish it's payments, so no money is lost.

The pool is running stable again..... Finally.

No it is not running stable. It is disconnecting and affecting stability of ETH mining as well. Check my screenshot - hashrate was on zero hour ago!!

Same here, and overall for 24h mining im geting 1/4 of the XVG whattomine calculated

[Lukke]

On my another mining farm I was testing zpool.ca. It is even worse than with nlpool... Calculated 600 coins, earned just 120 and in "last 50 eatnings" there is a bunch of other coins Shield, Ninja, Taj, although in password fields in claymore is correctly set "c=XVG"...  Trying antminepool.com now... They said there set up a new server so lets see....

[Metroid]

Trying antminepool.com now... They said there set up a new server so lets see....

Same problems, like I said before, if by miracle you connect then your pc restarts -->? gameover hehe

[bskc]

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day. 

[peterboy1]

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day. 

so you are the official unimining representative here?

your pool is stable, but please solve the low earning. we almost get 50-80% less earning based on current difficulty mining xvg.

[HamsterBernd]

Hi,
unfortunately i have some problems. Everything works great for a day sometimes longer. Then the driver crash “amd-pro-dkms 17.40-483984:amdgpu kernel module failed” after that i have to install everthink new. It is not enough to deinstall the gpu driver. I use 5 x R9 390 with two 1000W power supplies. Do you have any idears?
should i try the Catalyst (Crimson) 15.12 driver for the cards?
I also saw, there is a newer version of Claymore Ethereum miner.

Thanks Sascha



ASRock H81 Pro BTC
8 GB
5 x R9 390
2 x 1000W power supplies

Xubuntu
AMDGPU-PRO drivers
Claymore’s Ethereum miner 10.2
Already checked singel and dual mode
nothing overclocked
nanopool

[Metroid]

so you are the official unimining representative here?

your pool is stable, but please solve the low earning. we almost get 50-80% less earning based on current difficulty mining xvg.

I dont think he cares, the only way to solve this is to create a very good pool, so nobody will mine with them, so they will have to pay the miners right to keep them in their pool, as it stands all xvg pools are thieves and all of them know it.

[Swiped]

Getting this error while running version 10.6 and can't figure out how to stop it:

03:36:40:155   1200   GPU 0 temp = 69, old fan speed = 50, new fan speed = 40

03:36:40:171   1200   GPU 1 temp = 68, old fan speed = 49, new fan speed = 40

03:36:40:186   1200   GPU 2 temp = 68, old fan speed = 55, new fan speed = 40

03:36:40:233   1200   GPU 3 temp = 72, old fan speed = 69, new fan speed = 58

03:36:40:249   1200   GPU 4 temp = 74, old fan speed = 63, new fan speed = 53

03:36:40:280   1200   GPU 5: got incorrect temperature 511, ignore
03:36:40:280   1200   GPU 6: got incorrect temperature 511, ignore

It shuts the miner down.  I am running 7 Sapphire rx 480 8g cards with Windows 10, and I have not figured out what to do to get rid of it.  May be the result of using a pcie splitter on the 6th slot, but I have 40 other machines just like it and none of them are doing it.  Please share any experiences you have with this to give me some ideas.  I have reinstalled the drivers 3 times (August 234d blockchain drivers) flashed the video cards' bios back to the original, and removed all control parameters from the miner.  Looking for the "what else" I can try.  Thanks.

[rul3s]

Hello guys,
I've got a Sapphire Pulse RX560 OC, to start minning with Claymore Minner i should go with the last version of it (Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v10.6 - Catalyst 15.12-17.x - CUDA 8.0_9.1_7.5_6.5.zip) and the last AMD drivers (adrenalin-edition-18.2.2)?

Thanks for your help!