Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Metroid]

Just wanted to share that 11.0 rock solid, no single freeze or spurious reboot, while on 10.3/10.6 it was rebooting several times per day.

+1

With older claymore versions, I got several restart per day beacuse "WATCHDOG: GPU 5 hangs in OpenCL call, exit", but with 11.0 my rig is running smoothly for +48h now.

Great job Claymore

There is nothing different concerning that, what you got is just an issue you had to deal yourself and you blamed claymore's previous version, now that a magical fix came, you are saying this version solved the issue hehe, amazing how many noobs we have here mining hehe

[Hodlmyhand]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

Can't connect? is it working right now?

[munGoMine]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

Can't connect? is it working right now?

Wasn't working for me too.
In the russian chat at the bottom I deciphered that you can also use stratum+tcp://185.185.70.246:5766

I tried and it connected.

[Hodlmyhand]

New stable blake2s verge pool:
http://xvgminingclub.info/
low fee, hashrate growing rapidly
we find blocks very often
try it yourself!

Can't connect? is it working right now?

Wasn't working for me too.
In the russian chat at the bottom I deciphered that you can also use stratum+tcp://185.185.70.246:5766

I tried and it connected.

Thank you mate! it is connected now

[serendipity969]

I haved myself this problem. It is the internal temp sensor of the GPU. If you look to the Claymore info maybe will see (until it crash) the higher temp. So do this firstly :

1. try to use a mini air-compresor and blow up the dust from the GPU
2. change the place of this hot GPU with other one
3. if the warranty it not pass, unscrew the radiator and change the siliconic paste , before clean the old one.

For me it works on 1+2 ( for now)

Getting this error while running version 10.6 and can't figure out how to stop it:

03:36:40:155   1200   GPU 0 temp = 69, old fan speed = 50, new fan speed = 40

03:36:40:171   1200   GPU 1 temp = 68, old fan speed = 49, new fan speed = 40

03:36:40:186   1200   GPU 2 temp = 68, old fan speed = 55, new fan speed = 40

03:36:40:233   1200   GPU 3 temp = 72, old fan speed = 69, new fan speed = 58

03:36:40:249   1200   GPU 4 temp = 74, old fan speed = 63, new fan speed = 53

03:36:40:280   1200   GPU 5: got incorrect temperature 511, ignore
03:36:40:280   1200   GPU 6: got incorrect temperature 511, ignore

It shuts the miner down.  I am running 7 Sapphire rx 480 8g cards with Windows 10, and I have not figured out what to do to get rid of it.  May be the result of using a pcie splitter on the 6th slot, but I have 40 other machines just like it and none of them are doing it.  Please share any experiences you have with this to give me some ideas.  I have reinstalled the drivers 3 times (August 234d blockchain drivers) flashed the video cards' bios back to the original, and removed all control parameters from the miner.  Looking for the "what else" I can try.  Thanks.

[xodes777]

GPU0 t=53C fan=64%, GPU1 t=54C fan=46%, GPU2 t=53C fan=71%, GPU3 t=53C fan=64%, GPU4 t=54C fan=63%, GPU5 t=56C fan=66%, GPU6 t=51C fan=35%
10:28:43:793   11f0   em hbt: 16, dm hbt: 16, fm hbt: 109,
10:28:43:793   11f0   watchdog - thread 0 (gpu0), hb time 78
10:28:43:793   11f0   watchdog - thread 1 (gpu0), hb time 156
10:28:43:793   11f0   watchdog - thread 2 (gpu1), hb time 109
10:28:43:793   11f0   watchdog - thread 3 (gpu1), hb time 31
10:28:43:793   11f0   watchdog - thread 4 (gpu2), hb time 109
10:28:43:793   11f0   watchdog - thread 5 (gpu2), hb time 31
10:28:43:793   11f0   watchdog - thread 6 (gpu3), hb time 16
10:28:43:793   11f0   watchdog - thread 7 (gpu3), hb time 78
10:28:43:793   11f0   watchdog - thread 8 (gpu4), hb time 16
10:28:43:793   11f0   watchdog - thread 9 (gpu4), hb time 109
10:28:43:793   11f0   watchdog - thread 10 (gpu5), hb time 94
10:28:43:793   11f0   watchdog - thread 11 (gpu5), hb time 172
10:28:43:793   11f0   watchdog - thread 12 (gpu6), hb time 78
10:28:43:793   11f0   watchdog - thread 13 (gpu6), hb time 16
10:28:43:793   11f0   WATCHDOG: GPU error, you need to restart miner

Why does such an error occur? If you disable watchdog (-wd 0) everything works fine! In version 10.2, there is no such error! What's wrong ?
 No rejects No wrong ETH shares!

[kgminer]

Hello Miners.

Verge Money going out query without my knowledge

Just a quick question on VERGE please . We see random outgoings to different addresses from our verge blockchain wallet. It seems random without any pattern and generally is the same amount as the sum paid within a few hours from the mining pool. could you please advise if this is some sort of fee etc that we are unaware of or is out wallet being incorrectly charged.

NOTE: I have wallet on cryptopia and this money is not ending in our wallet.I am using antminepool and nlpool as backup. 

To check your blockchain transactions, go to the following link and enter the wallet address

https://verge-blockchain.info/

Screenshot of what I am talking about

https://imgur.com/a/srQQo

[ampsdc]

My ClayMores Dual miner is crashing my computer!

Here my log:

02:13:48:290   934   Check and remove old log files...
02:13:48:290   934   args: -platform 3 -epool eth-au1.nanopool.org:9999 -ewal 0x4Eb6d8ijABdA5E1C043fBa7bBaA74517233a0270 -epsw x -eworker acm355 -mode 1
02:13:48:290   934   
02:13:48:290   934   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
02:13:48:290   934   º                Claymore's Dual GPU Miner - v11.0               º
02:13:48:290   934   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
02:13:48:290   934   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
02:13:48:290   934   
02:13:48:290   934   b501
02:13:48:509   934   ETH: 1 pool is specified
02:13:48:509   934   Main Ethereum pool is eth-au1.nanopool.org:9999
02:13:57:817   934   OpenCL platform: NVIDIA CUDA
02:13:57:817   934   OpenCL platform: AMD Accelerated Parallel Processing
02:13:57:817   934   OpenCL initializing...

02:13:57:817   934   AMD Cards available: 6
02:13:57:817   934   GPU #0: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 2:0:0)
02:13:57:817   934   GPU #0 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #1: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 3:0:0)
02:13:57:817   934   GPU #1 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #2: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 4:0:0)
02:13:57:817   934   GPU #2 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #3: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 5:0:0)
02:13:57:817   934   GPU #3 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #4: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
02:13:57:817   934   GPU #4 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #5: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 13:0:0)
02:13:57:817   934   GPU #5 recognized as Radeon RX 480/580
02:13:57:817   934   POOL/SOLO version
02:13:57:817   934   Platform: Windows
02:13:57:863   934   start building OpenCL program for GPU 0...
02:13:58:381   934   done
02:13:58:615   934   start building OpenCL program for GPU 1...
02:13:58:881   934   done
02:13:59:100   934   start building OpenCL program for GPU 2...
02:13:59:350   934   done
02:13:59:569   934   start building OpenCL program for GPU 3...
02:13:59:865   934   done
02:14:00:100   934   start building OpenCL program for GPU 4...
02:14:00:334   934   done
02:14:00:569   934   start building OpenCL program for GPU 5...
02:14:00:803   934   done
02:14:01:059   934   GPU #0: algorithm ASM
02:14:01:075   934   GPU #1: algorithm ASM
02:14:01:090   934   GPU #2: algorithm ASM
02:14:01:106   934   GPU #3: algorithm ASM
02:14:01:137   934   GPU #4: algorithm ASM
02:14:01:153   934   GPU #5: algorithm ASM

My Batch is -

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -platform 3 -epool eth-au1.nanopool.org:9999 -ewal 0x4Eb6d8ijABdA5E1C043fBa7bBaA74517233a0270 -epsw x -eworker acm355 -mode 1

Just hangs, and my old claymores version 10 is doing the same thing.

Running 6 x rx580's and 6 gtx 1070's.

Claymores wont event detect the nvidia cards?

If i disable 3 of the amd cards, it starts to mine but still wont pick up the gtx 1070's.

Running the latest nvidia drivers and amd block chain driver.

Any help hugely appreciated!

[ampsdc]

My ClayMores Dual miner is crashing my computer!

Here my log:

02:13:48:290   934   Check and remove old log files...
02:13:48:290   934   args: -platform 3 -epool eth-au1.nanopool.org:9999 -ewal 0x4Eb6d8ijABdA5E1C043fBa7bBaA74517233a0270 -epsw x -eworker acm355 -mode 1
02:13:48:290   934   
02:13:48:290   934   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
02:13:48:290   934   º                Claymore's Dual GPU Miner - v11.0               º
02:13:48:290   934   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
02:13:48:290   934   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
02:13:48:290   934   
02:13:48:290   934   b501
02:13:48:509   934   ETH: 1 pool is specified
02:13:48:509   934   Main Ethereum pool is eth-au1.nanopool.org:9999
02:13:57:817   934   OpenCL platform: NVIDIA CUDA
02:13:57:817   934   OpenCL platform: AMD Accelerated Parallel Processing
02:13:57:817   934   OpenCL initializing...

02:13:57:817   934   AMD Cards available: 6
02:13:57:817   934   GPU #0: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 2:0:0)
02:13:57:817   934   GPU #0 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #1: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 3:0:0)
02:13:57:817   934   GPU #1 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #2: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 4:0:0)
02:13:57:817   934   GPU #2 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #3: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 5:0:0)
02:13:57:817   934   GPU #3 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #4: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 11:0:0)
02:13:57:817   934   GPU #4 recognized as Radeon RX 480/580
02:13:57:817   934   GPU #5: Ellesmere (Radeon RX 580 Series), 8192 MB available, 36 compute units (pci bus 13:0:0)
02:13:57:817   934   GPU #5 recognized as Radeon RX 480/580
02:13:57:817   934   POOL/SOLO version
02:13:57:817   934   Platform: Windows
02:13:57:863   934   start building OpenCL program for GPU 0...
02:13:58:381   934   done
02:13:58:615   934   start building OpenCL program for GPU 1...
02:13:58:881   934   done
02:13:59:100   934   start building OpenCL program for GPU 2...
02:13:59:350   934   done
02:13:59:569   934   start building OpenCL program for GPU 3...
02:13:59:865   934   done
02:14:00:100   934   start building OpenCL program for GPU 4...
02:14:00:334   934   done
02:14:00:569   934   start building OpenCL program for GPU 5...
02:14:00:803   934   done
02:14:01:059   934   GPU #0: algorithm ASM
02:14:01:075   934   GPU #1: algorithm ASM
02:14:01:090   934   GPU #2: algorithm ASM
02:14:01:106   934   GPU #3: algorithm ASM
02:14:01:137   934   GPU #4: algorithm ASM
02:14:01:153   934   GPU #5: algorithm ASM

My Batch is -

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -platform 3 -epool eth-au1.nanopool.org:9999 -ewal 0x4Eb6d8ijABdA5E1C043fBa7bBaA74517233a0270 -epsw x -eworker acm355 -mode 1

Just hangs, and my old claymores version 10 is doing the same thing.

Running 6 x rx580's and 6 gtx 1070's.

Claymores wont event detect the nvidia cards?

If i disable 3 of the amd cards, it starts to mine but still wont pick up the gtx 1070's.

Running the latest nvidia drivers and amd block chain driver.

Any help hugely appreciated!

Iirc you can't run AMD and NVIDIA at the same time. You need to run the Claymore miner 2x.
1x with all AMD cards
1x with all NVIDIA cards

You can use -di for GPU selection (example):
NVIDIA: -di 034
AMD: -di 125

Will try it out, but i did have them running all at the same time with the one instance of claymores? Before??? Whatt's changed?

[alex_85]

Guys i know there are many posts etc, but could you recommend best -cclock/-cvddc  and  -mclock/-mvddc for Sapphire RX580 Nitro+ 8GB Micron memory

is 1250/2210 good with 900mv core voltage ?

Of course the target is minimum mem errors, highest hashrate, minimum stale shares and wattage

[kakoluckiam]

Has anyone found a way to mine keccak? Whatever coin I try to mine, on whatever pool, i get 100% rejected shares on keccak.
Why is that?

[goodbitprofit]

Has anyone found a way to mine keccak? Whatever coin I try to mine, on whatever pool, i get 100% rejected shares on keccak.
Why is that?

Same question with no answer. All night I was tried and no success.
Last houpe was Smart Cash, but last night they went down with pool, and it seems that its some shady project. Lots of people complaining.

How I figure out, Keccak and Blake is a fork from Sha256. All coins are old from 2013-14,... and pools are too long closed.

Maybe we need Algo to mine ERC ICO tokens

[goodbitprofit]

Guys i know there are many posts etc, but could you recommend best -cclock/-cvddc  and  -mclock/-mvddc for Sapphire RX580 Nitro+ 8GB Micron memory

is 1250/2210 good with 900mv core voltage ?

Of course the target is minimum mem errors, highest hashrate, minimum stale shares and wattage

I have 3 Hynih and 3 Samsung memory

 -cclock 1200,1150,1200,1200,1200,1200 -mclock 2250,2050,2030,2200,2230,2050 -powlim 20,20,20,20,20,20 -cvddc 900,900,900,900,900,900 -mvddc 900,900,900,900,900,900

This setup I am using in past 2 month, not checking mem errors, with Clay 11 Hash r increased for 1-3%, stale 1-3%

[MekMekPL]

Has anyone found a way to mine keccak? Whatever coin I try to mine, on whatever pool, i get 100% rejected shares on keccak.
Why is that?

Same question with no answer. All night I was tried and no success.
Last houpe was Smart Cash, but last night they went down with pool, and it seems that its some shady project. Lots of people complaining.

How I figure out, Keccak and Blake is a fork from Sha256. All coins are old from 2013-14,... and pools are too long closed.

Maybe we need Algo to mine ERC ICO tokens

you cannot mine CREA it's keccak-c. dont bother keccak there is no PROFITABLE coin.

i mined MAX here: max.thecoin.pw. WTM said 0 profits.

[Ratledge]

Iirc you can't run AMD and NVIDIA at the same time. You need to run the Claymore miner 2x.
1x with all AMD cards
1x with all NVIDIA cards

You can use -di for GPU selection (example):
NVIDIA: -di 034
AMD: -di 125

Will try it out, but i did have them running all at the same time with the one instance of claymores? Before??? Whatt's changed?

Seriously? That is your advice to this poor guy?

Please tell my GTX 1060 & 1080 to quit playing fair with the two RX 580 cards in my rig.

Obviously, they are not supposed to get along?  I am seeing an average of 120Mh/sec from the four cards.

Is it easier to manage with just AMD or nVidia? I suppose, but it is far too lazy to say that it will not work. Of course you can mix the red and the green GPU cards together in one rig. The very nature of the Claymore Miner is that it works with them all.

[alex_85]

Guys i know there are many posts etc, but could you recommend best -cclock/-cvddc  and  -mclock/-mvddc for Sapphire RX580 Nitro+ 8GB Micron memory

is 1250/2210 good with 900mv core voltage ?

Of course the target is minimum mem errors, highest hashrate, minimum stale shares and wattage

I have 3 Hynih and 3 Samsung memory

 -cclock 1200,1150,1200,1200,1200,1200 -mclock 2250,2050,2030,2200,2230,2050 -powlim 20,20,20,20,20,20 -cvddc 900,900,900,900,900,900 -mvddc 900,900,900,900,900,900

This setup I am using in past 2 month, not checking mem errors, with Clay 11 Hash r increased for 1-3%, stale 1-3%

Thanks for your answer, is this for dual or only eth mining?

[goodbitprofit]

Thanks for your answer, is this for dual or only eth mining?

You welcome. Dual ETC

[goodbitprofit]

How I figure out, Keccak and Blake is a fork from Sha256. All coins are old from 2013-14,... and pools are too long closed.

Maybe we need Algo to mine ERC ICO tokens

you cannot mine CREA it's keccak-c. dont bother keccak there is no PROFITABLE coin.

i mined MAX here: max.thecoin.pw. WTM said 0 profits.

[/quote]

Sorry I am new in all of this, but thanks.

No lucky connection to pool... authorization failed.

[hozerdev]

Just wanted to share that 11.0 rock solid, no single freeze or spurious reboot, while on 10.3/10.6 it was rebooting several times per day.

+1
With older claymore versions, I got several restart per day beacuse "WATCHDOG: GPU 5 hangs in OpenCL call, exit", but with 11.0 my rig is running smoothly for +48h now.
Great job Claymore

There is nothing different concerning that, what you got is just an issue you had to deal yourself and you blamed claymore's previous version, now that a magical fix came, you are saying this version solved the issue hehe, amazing how many noobs we have here mining hehe

Amazing how many idiots are there, that have never written a single line of code, know nothing and judging the others by number of posts on the forum.

[l30z1n]

@mine_phun

NL adm. There must be something wrong with the pool. The number of orphan blocks remains very high. No other pool has as many orphan blocks as NL. The stability has improved a lot, only need to solve the amount of orphan blocks for now.