Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Espacee]

Hello Claymore,


Thank you for awesome miner as first.

I have a feature request for Remote Manager.

Normally we can follow Share and Ircorrect share count over Dual Miner manager 3.8.

My Request is, can you add share count for last 1 hour statistic on stats page please like : ETH Share 1Hr

Normally im following Correct and Ircorrect shares over remote manager but if i can see last 1 hour correct share count between Running Time and Ethereum Stats , that will be awesome.


So, thank you again for the good miner.
Best Regards.

[1714042450]

1714042450

[1714042450]

1714042450

[Espacee]

Hello good day ,Claymore v11.5 and phoenixminer 2.8.a users.
First, I used an online virus scanner to check the file phoenixminer 2.8.a.
The results are: 7/65 detected
https://www.virustotal.com/#/file/ab3f31a48199c800f7f958df21aed6565a9e972581d301ffedc0afa15b8e1cb7/detection
which is actually an excellent result, given that the Claymore's v 11.5 miner gives 19/62 positives
https://www.virustotal.com/#/file/9f2da65c0d6ff694aa66bf9207de9b42f62604021459dfbcba1c2ea2625116c2/detection
And even the open-source ethminer 0.14.0.dev4 gives 10/65 positives, which is ridiculous .
https://www.virustotal.com/#/file/33c0d6b7676d69ed497f8f91fa88ddb7b41c3db2e0cc0291de7d6c0724f66e9c/detection

 a miner is a trojan now!

As a reply i want to inform you about that..

All miners will be on virus lists in very close time, because some users mining over Company sources, like ; Servers, Endpoints etc..

For the reason all the antivirus and threat protection softwares reporting miners to system admin for threat, If Claymore a threat for companies , yes its a way to find miners over companies.

So, its not releated with Trojan, its releated with Company protection.


Best Regards.

[argai666]

There is a multi algo coin named Quark coin. Two of its algos are blake and keccak. Have anyone tried to dual mine that coin? Forum page is here https://bitcointalk.org/index.php?topic=2042673.0

[Koinmen]

After new ETH DAG  1060 3gb say bye bye to ETH on W10, I try to mine now UBIQ on Ethermine but when they want to take devfee reestart becasuse they take ETH not UBIQ and DAG of ETH is not supported by 3gb GPU.

Who has a good solution to all 3gb  GPU ?

Now after all cripto-coin go down is mandatory to have the mine in optimun condition to take same profit,  another problem is that rare coin is not easy to convert in USD/EUR.

 I apreciate your comment. 



I dont want to change to Linux  for only same month more of life of ETH

[mayers8851]

After new ETH DAG  1060 3gb say bye bye to ETH on W10, I try to mine now UBIQ on Ethermine but when they want to take devfee reestart becasuse they take ETH not UBIQ and DAG of ETH is not supported by 3gb GPU.
Who has a good solution to all 3gb  GPU ?
Now after all cripto-coin go down is mandatory to have the mine in optimun condition to take same profit,  another problem is that rare coin is not easy to convert in USD/EUR.
 I apreciate your comment. 
I dont want to change to Linux  for only same month more of life of ETH

Use Windows 7 or Linux, there is no solution for Windows 10.

[4ward]

There is a multi algo coin named Quark coin. Two of its algos are blake and keccak. Have anyone tried to dual mine that coin? Forum page is here https://bitcointalk.org/index.php?topic=2042673.0

It's algo consists of a chains of 6 hashing function (among which are blake and keccak), but its not the same as multi algo coin (like Verge or Myriad)

[mine_phun]

For those still looking for a high quality mining pool:

>>
NLPool is a Dutch miningpool running in Amsterdam the Netherlands. The pool has been setup to provide a good and stable pool for people who are located in the Netherlands or Benelux. Our pool is dedicated to have less latency meaning lower risks for stale shares. This means you will get higher profits.

Our philosophy:
- Performance
- Profit by lowering latency and stale shares
- Security
- Minimum fees
- Easy of use

IMPORTANT UPDATE 15-3-2018:
We enabled mining with your Litecoin wallet all coins. Just put in your Litecoin wallet address, use password x and select your algo to mine. The pool will pay you straight into your Litecoin (Coinbase/GDAX) wallet so you can convert straight to Eur/USD! ... this will save you a lot of time / effort and conversioncost!!

Example: -o stratum+tcp://mine.nlpool.nl:5766 -dwal <LTC_WALLET_ADDRESS> -dpsw c=xvg -dcoin blake2s | To mine XVG only and get payed in LTC


Our mining fee will be of 0% for all Blake2S algo coins until April 1st. After the launch period, it will be fixed between 0.5% and 1%

How to contact us ?
E-mail: nlpool.nl@outlook.com
Telegram: : t.me/nlpool

Key features:
- Amsterdam dedicated server with DDos Protection
- Small mining fee : 0% during the 2 months launch period. After, between 0,5% and 1%
- Anonymous and no registration !
- Hourly payments
- yiimp multi-algo with several coins
- Everything is tested on a second non-productive server before launching to minimize your risks on the actual mining pool. (new stratum, webpages changes, payments and other code updates)

Miners:
For nVidia cards, we suggest you to use  CCminer 2.2.2 : https://github.com/tpruvot/ccminer/releases
For GTX 1080/1080 Ti, ccminer will work but hashrate may be increased with https://github.com/alexis78/ccminer

For AMD cards, tests are ongoing, we had good results using these miners:
https://github.com/tpruvot/sgminer/releases
https://github.com/zawawawa/gatelessgate/releases
https://github.com/ghostlander/nsgminer/releases

Coins:

Here are examples of launch files (*.bat files) for Claymore Dual mining:

VERGE: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal <YOURVERGEWALLETADDRESS> -dpsw c=xvg -dcoin blake2s

SHIELD: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal <YOURSHIELDWALLETADDRESS> -dpsw c=xsh -dcoin blake2s

Infocoin: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal <YOURINFOWALLETADDRESS> -dpsw c=info -dcoin blake2s

Nevacoin: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal <YOURNEVAWALLETADDRESS> -dpsw c=neva -dcoin blake2s

TajCoin: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal <YOURTAJWALLETADDRESS> -dpsw c=taj -dcoin blake2s

MaxCoin: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal <YOURMAXWALLETADDRESS> -dpsw c=MAX -dcoin keccak

CreativeCoin: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal <YOURCreAWALLETADDRESS> -dpsw c=CREA -dcoin keccak

SmartCash: EthDcrMiner64.exe -epool eu1.ethpool.org:4444 -ewal <Your_ETH_WALLETADDRESS>.<YourWorkerName> -epsw x -dpool stratum+tcp://mine.nlpool.nl:5133 -dwal <YOURSMARTWALLETADDRESS> -dpsw c=SMART -dcoin keccak


Here are examples of launch files (*.bat files) for CCMiner (nVidia):

Algo Blake2s:
- Verge: ccminer-x64 -a blake2s -o stratum+tcp://mine.nlpool.nl:5766 -u Your_XVG_Wallet_Address -p c=XVG --cpu-priority=3
- Shield: ccminer-x64 -a blake2s -o stratum+tcp://mine.nlpool.nl:5766 -u Your_XSH_Wallet_Address -p c=XSH --cpu-priority=3
- Infocoin: ccminer-x64 -a blake2s -i 1,1 -o stratum+tcp://mine.nlpool.nl:5766 -u Your_INF_Wallet_Address -p c=INF --cpu-priority=3
- NevaCoin: ccminer-x64 -a blake2s -o stratum+tcp://mine.nlpool.nl:5766 -u Your_NEVA_Wallet_Address -p c=NEVA --cpu-priority=3
- TajCoin: ccminer-x64 -a blake2s -o stratum+tcp://mine.nlpool.nl:5766 -u Your_TAJ_Wallet_Address -p c=TAJ --cpu-priority=3

Algo Keccak:
- Maxcoin: ccminer-x64 -m 2 -a keccak -o stratum+tcp://mine.nlpool.nl:5133 -u Your_MAXCOIN_Wallet_Address -p c=MAX --cpu-priority=3
- Creativecoin: ccminer-x64 -m 2 -a keccak -o stratum+tcp://mine.nlpool.nl:5133 -u Your_CREATIVECOIN_Wallet_Address -p c=CREA --cpu-priority=3
- SmartCash: ccminer-x64 -m 2 -a keccak -o stratum+tcp://mine.nlpool.nl:5133 -u Your_SMARTCASH_Wallet_Address -p c=SMART --cpu-priority=3

Algo Neoscrypt:
- Vivo: ccminer-x64 -a neoscrypt -o stratum+tcp://mine.nlpool.nl:4233 -u Your_VIVO_Wallet_Address -p c=VIVO --cpu-priority=3
- Innova: ccminer-x64 -a neoscrypt -o stratum+tcp://mine.nlpool.nl:4233 -u Your_Innova_Wallet_Address -p c=INN --cpu-priority=3
- GoByte: ccminer-x64 -a neoscrypt -o stratum+tcp://mine.nlpool.nl:4233 -u Your_GoByte_Wallet_Address -p c=VIVO --cpu-priority=3

Algo Scrypt:
- Gulden: ccminer-x64 -a scrypt -o stratum+tcp://mine.nlpool.nl:3433 -u Your_EFL_Wallet_Address -p c=GLD --cpu-priority=3

Q/A:
- Can I request to add a coin ? (Please, yes!)
Reply this thread or contact us by e-mail.
- Where is my payment ?
The payments are performed each hour for all (unpaid) balances above 0.001. If you participated in the mining of a block of a crypto-currency, if the block is not orphan or uncle, when the block is confirmed (a few minutes, hours or days for some cryptos), your balance will be increased of X (=block reward minus pool fee ) percent of accepted shares for the block.

[Krdoje]

"Trojan:Win32/CoinMiner!bit"

This is a false positive from your virus scanner. Most, if not all, virus scanners will detect mining programmes as viruses.

"SppExtComObjHook.dll"

This, AFAIK, is part of 'AutoKMS' activation of Windows or Office, but could be malicious.

Thanks Sir.. I was so mad ..
I`m using  Claymore's Miner for the first time and I don`t have problem when I download and start mining,..
Just couple hrs after my window color was changed..etc
 I dig in registry those .dll`s and can`t believe that they are together with Miner.. But I did everything offline, all setup,.. only what I download from net was miner..
Excuse me for distraction and I'm clear that I did not start in the right way but far from that how I`m not reading the first page ..

Best reg..

Just take any miner and distribute it somehow with your wallet in settings - that is all, a miner is a trojan now!  

nothing would surprise me..

[rusetskyk@gmail.com]

After new ETH DAG  1060 3gb say bye bye to ETH on W10, I try to mine now UBIQ on Ethermine but when they want to take devfee reestart becasuse they take ETH not UBIQ and DAG of ETH is not supported by 3gb GPU.
Who has a good solution to all 3gb  GPU ?
Now after all cripto-coin go down is mandatory to have the mine in optimun condition to take same profit,  another problem is that rare coin is not easy to convert in USD/EUR.
 I apreciate your comment. 
I dont want to change to Linux  for only same month more of life of ETH

Use Windows 7 or Linux, there is no solution for Windows 10.

have a solution, type -eres 0

[bithead007]

After new ETH DAG  1060 3gb say bye bye to ETH on W10, I try to mine now UBIQ on Ethermine but when they want to take devfee reestart becasuse they take ETH not UBIQ and DAG of ETH is not supported by 3gb GPU.
Who has a good solution to all 3gb  GPU ?
Now after all cripto-coin go down is mandatory to have the mine in optimun condition to take same profit,  another problem is that rare coin is not easy to convert in USD/EUR.
 I apreciate your comment. 
I dont want to change to Linux  for only same month more of life of ETH

Use Windows 7 or Linux, there is no solution for Windows 10.

have a solution, type -eres 0

Not sure why you think this works, I'm trying it and same error occurs on Windows Home 10.

CJ

[Premiermine]

Single

Ok, I had a similar thing when I upgraded to 11.5 but it was due to dual mining dcri values.

[Ratledge]

Hello good day ,Claymore v11.5 and phoenixminer 2.8.a users.
First, I used an online virus scanner to check the file phoenixminer 2.8.a.
The results are: 7/65 detected
https://www.virustotal.com/#/file/ab3f31a48199c800f7f958df21aed6565a9e972581d301ffedc0afa15b8e1cb7/detection
which is actually an excellent result, given that the Claymore's v 11.5 miner gives 19/62 positives
https://www.virustotal.com/#/file/9f2da65c0d6ff694aa66bf9207de9b42f62604021459dfbcba1c2ea2625116c2/detection
And even the open-source ethminer 0.14.0.dev4 gives 10/65 positives, which is ridiculous .
https://www.virustotal.com/#/file/33c0d6b7676d69ed497f8f91fa88ddb7b41c3db2e0cc0291de7d6c0724f66e9c/detection

 a miner is a trojan now!

As a reply i want to inform you about that..

All miners will be on virus lists in very close time, because some users mining over Company sources, like ; Servers, Endpoints etc..

For the reason all the antivirus and threat protection softwares reporting miners to system admin for threat, If Claymore a threat for companies , yes its a way to find miners over companies.

So, its not releated with Trojan, its releated with Company protection.

Best Regards.

Pretty much right on.  The best way to describe it is that many "anti-virus" programs don't even use scheduled downloads of "pattern" files for matching any more.  These days usually it's all kept in "the cloud" for easy (and instant) update.

The problem is that many no longer differentiate between a malicious (AKA "virus") code and a "PUP" or Potentially Unwanted Program in a commercial environment.  For businesses, you likely don't want employees running a mining application on your company servers, right?  Speaking as a former network security officer for the U S Department of Justice, you don't really care exactly what it is, but rather whether or not it is allowed by your "Terms of Service" (PUP) or whatever - or if it is actually harmful or what we use the term "virus".

"VirusTotal.com" doesn't care why (or how) any of the "anti-virus" applications determine it is unwanted, they just report the total detects.

There is no malicious code here, but it is a P2P app, and most - if not all - companies don't want Peer to Peer software on their servers.

[shuweee]

Sorry if this has been answered, i tried digging around the thread but couldn't find what im looking for. Might be the syntax im using when searching.

I have rig with 8 cards, I was wondering with Claymore, is it possible to specify a specific card to/with a different wallet address if i decide to only mine ETH for GPU 1-6 and GPU 7-8 on something else?

Thanks.

[big al]

Sorry if this has been answered, i tried digging around the thread but couldn't find what im looking for. Might be the syntax im using when searching.

I have rig with 8 cards, I was wondering with Claymore, is it possible to specify a specific card to/with a different wallet address if i decide to only mine ETH for GPU 1-6 and GPU 7-8 on something else?

Thanks.

Perhaps just open two instances of claymore

[Munka9]

After new ETH DAG  1060 3gb say bye bye to ETH on W10, I try to mine now UBIQ on Ethermine but when they want to take devfee reestart becasuse they take ETH not UBIQ and DAG of ETH is not supported by 3gb GPU.

Who has a good solution to all 3gb  GPU ?

Now after all cripto-coin go down is mandatory to have the mine in optimun condition to take same profit,  another problem is that rare coin is not easy to convert in USD/EUR.

 I apreciate your comment. 



I dont want to change to Linux  for only same month more of life of ETH

Linux isn't a one month solution its more like 14. Linux uses 6mb on all except the primary card and on that one it uses 43mb. If you make your first card something like a gtx 1050ti you should be able to keep going for at least the rest of the year. By my maths its actually May 2019.

[WEMCompany]

13:03:12:229   1840   No AMD cards in the list, ADL library will not be used.
13:03:12:255   1840   NVML version: 9.391.01
13:03:14:183   1840   SSL: Imported 44 certificates from local storage
13:03:14:204   10b8   ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <139.99.102.71> port 9999 (unsecure)
13:03:14:221   10b8   sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params":

13:03:14:225   10b8   ETH: Stratum - Connected (eth-asia1.nanopool.org:9999) (unsecure)
13:03:14:289   1840   DUAL MINING MODE ENABLED: ETHEREUM+BLAKE2S

13:03:14:305   1020    B2S: Stratum - connecting to 'blake2s.mine.zpool.ca' <198.50.152.135> port 5766 (unsecure)
13:03:14:320   1840   ETH: eth-proxy stratum mode
13:03:14:333   1840   "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
13:03:14:342   1840   Watchdog enabled
13:03:14:350   1840   Remote management (READ-ONLY MODE) is enabled on port 3333
13:03:14:359   1840   

13:03:14:576   1020   sent: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}

13:03:14:581   1020   sent: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

13:03:14:592   1020    B2S: Stratum - Connected (blake2s.mine.zpool.ca:5766) (unsecure)

How to remove startum "UNSECURE" connection? This was not in Version 11.o.
Thank you.

[cryptoillusion1]

13:03:12:229   1840   No AMD cards in the list, ADL library will not be used.
13:03:12:255   1840   NVML version: 9.391.01
13:03:14:183   1840   SSL: Imported 44 certificates from local storage
13:03:14:204   10b8   ETH: Stratum - connecting to 'eth-asia1.nanopool.org' <139.99.102.71> port 9999 (unsecure)
13:03:14:221   10b8   sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params":

13:03:14:225   10b8   ETH: Stratum - Connected (eth-asia1.nanopool.org:9999) (unsecure)
13:03:14:289   1840   DUAL MINING MODE ENABLED: ETHEREUM+BLAKE2S

13:03:14:305   1020    B2S: Stratum - connecting to 'blake2s.mine.zpool.ca' <198.50.152.135> port 5766 (unsecure)
13:03:14:320   1840   ETH: eth-proxy stratum mode
13:03:14:333   1840   "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
13:03:14:342   1840   Watchdog enabled
13:03:14:350   1840   Remote management (READ-ONLY MODE) is enabled on port 3333
13:03:14:359   1840   

13:03:14:576   1020   sent: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}

13:03:14:581   1020   sent: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

13:03:14:592   1020    B2S: Stratum - Connected (blake2s.mine.zpool.ca:5766) (unsecure)

How to remove startum "UNSECURE" connection? This was not in Version 11.o.
Thank you.

You will need to connect to a secure server using SSL .....read page 1 command line options  -epool

[paha77]

this happens to me as well for hardcoded bios.

temporary solution is disable p0-p6 in overdriventool. or hardcode your bios to use the same clocks on p0-p6.

this must be a bug, since this is not happening on previous versions.

But I have never had this problem before and since yesterday it is permanently on this lower hashrate. Quite strange to be a minor bug in Claymore...

[Koinmen]

After new ETH DAG  1060 3gb say bye bye to ETH on W10, I try to mine now UBIQ on Ethermine but when they want to take devfee reestart becasuse they take ETH not UBIQ and DAG of ETH is not supported by 3gb GPU.

Who has a good solution to all 3gb  GPU ?

Now after all cripto-coin go down is mandatory to have the mine in optimun condition to take same profit,  another problem is that rare coin is not easy to convert in USD/EUR.

 I apreciate your comment. 



I dont want to change to Linux  for only same month more of life of ETH

Linux isn't a one month solution its more like 14. Linux uses 6mb on all except the primary card and on that one it uses 43mb. If you make your first card something like a gtx 1050ti you should be able to keep going for at least the rest of the year. By my maths its actually May 2019.

Thanks for your reply, May 19 is  a good date. 

[Tr1n1tY]

Anyone also having high stale shares lately on ethermine, v11.5? It seems to fluctuate mostly between 4-6%. Still a lot better than previous claymore versions. Any advice to reduce? Not getting any rejected shares, ping 180ms

https://imgur.com/a/cgy4i