Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Havane]

Hello

At the first start of my mining rig, I've got 25 Mh/s / card.
I need to restart the miner, for example with the -minspeed command, to get 30 Mh/s

Do you know why ?

Thanks

[1713544524]

1713544524

[1713544524]

1713544524

[biospb]

I have a mining team with the Motherboard BTC h110 Asrock, I first installed 6 of Video Cards 1070 which worked very well, then I went incorporating RX570 cards one by one, however, on the 3rd card the application (Clamore's) together with Windows 10 is blocked, to the point that I must restart from the reset button, the computer has 8GB RAM, 120GB SSD.

....

I appreciate all the possible information.

try linux.

[newil5]

Quick question: in order to mine eth with ethminer one needs to download the blockchain with geth. so does geth still need to run with this miner correct?
what about decred? what do i need to download the decred's blockchain? thank you.

edit: would it also be okay to use claymore double miner while also using decred's command line wallet to mine POS. thank you.

[leonix007]

tks all, this problem is solved after removing Intel driver

which Intel drivers did you delete? I'm getting the same error

Faulting application name: EthDcrMiner64.exe, version: 0.0.0.0, time stamp: 0x5abe0fb3
Faulting module name: igdrclneo64.dll, version: 0.0.0.0, time stamp: 0x5a96b19b
Exception code: 0xc0000005
Fault offset: 0x0000000000030819
Faulting process id: 0x1adc
Faulting application start time: 0x01d3d5f908532e32
Faulting application path: C:\Users\slik\Downloads\eth\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal_Blake2s_Keccak AMD+NVIDIA GPU Miner v11.6\EthDcrMiner64.exe
Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\igdlh64.inf_amd64_250db833a1cd577e\igdrclneo64.dll
Report Id: 9e7b4464-c177-442e-9c2e-b816c3cceaec
Faulting package full name:
Faulting package-relative application ID:

that must be his Onboard VGA intel driver, in other case you may disable onboard Video even its not an intel

[WhackOBill]

Anyone able to mine Musicoin (current DAG 1.61GB) in a 2GB card in Win10?  This is just a card on the bus with no display attached and comes up with 71MB pre-allocated ... by Win10 I assume.  I would have thought that Claymore v11.6 would be able to build the DAG and install it in the remaining space but apparently not.  I would understand if this were a card also running a display in Windows but as a non-display card it's showing 2MB Dedicated and 0MB Dynamic allocated in GPU-Z at idle.  HWiNFO shows 71MB allocated total.

Does the on-GPU code from Claymore take up the other 350+ MB when run and prevents the DAG from allocating?  I'm -eres 0 and -allcoins 1 on the CL.

[MinerosYV]

ATM what is the best pool to miner Verge ?

Verge can be mined with a variety of algorithms but if you are using Claymore's Dual Etherium miner you are restricted to Blake2s.
One recommended pool for Blake2s is https://www.zpool.ca/site/mining , but I have prefered to use Scrypt on MiningPoolHub https://verge-scrypt.miningpoolhub.com/index.php?page=gettingstarted

Verge thread.
https://bitcointalk.org/index.php?topic=1365894.0

yes, i talk about Blake2s algo.

About 2 months ago I stopped mining Verge because many of the pools are scam or steal the hashrate, i tried unimining, antminepool and nlpool.

I'll test again to see if it pays off, at this point I'm testing the unimining

We got this one going on, we are learning every day, fees are very low, most of the rigs there are ours.

www.pool2mine.com

We got Yenten as a third coin if you want to try that too.

You are welcome to try it, some more power would sure be welcome

[MinerosYV]

Good Night Friends,
I ask you for collaboration in this way, I do not have much experience in this.

I have a mining team with the Motherboard BTC h110 Asrock, I first installed 6 of Video Cards 1070 which worked very well, then I went incorporating RX570 cards one by one, however, on the 3rd card the application (Clamore's) together with Windows 10 is blocked, to the point that I must restart from the reset button, the computer has 8GB RAM, 120GB SSD.

Failed attempts
- I increased the Virtual memory without success,
- I downloaded the last update of Claymore's 11.6 and without success,
- I tried and exchanged the Rizer and they are good.
- I disabled the rx570 Video Cards randomly and neither, which shows that it is not for any specific card
- The current Driver is the last recommended by AMD for mining.

Only possible use:
- I added to the command line -platform for each manufacturer therefore I must open two windows of Claymore's, however, I do not think it takes full advantage of the Hash in the mine and I do not know the consequences of this.

I appreciate all the possible information.
  
___________________________

Buenas Noches Amigos,

Les pido colaboración por esta vía, no tengo mucha experiencia en esto..

Cuento con un equipo de minería con la Tarjeta Madre BTC h110 Asrock, primero instalé 6 de Tarjetas de Video 1070 el cual a funcionado muy bien, luego fui incorporando las tarjetas RX570 una a una, sin embargo, en la 3era tarjeta la aplicación (Clamore's) junto con el Windows 10 se bloquea al punto que debo reiniciar desde el botón de reset, el equipo tiene de 8GB RAM, SSD 120GB.

Intentos Fallidos
- Aumenté la memoria Virtual sin éxito,
- Bajé la ultima actualización de Claymore's 11.6 y sin éxito,
- Probé e intercambié los Rizer y están buenos.
- Inhabilité las tarjetas de Video rx570 aleatoriamente y tampoco, el cual demuestra que no es por alguna tarjeta específica
- El Driver actual es el último recomendado por AMD para minería.

Único posible uso:
Agregué a la línea de comando el -platform para cada fabricante por lo tanto debo abrir dos ventanas de Claymore's, sin embargo, me parece que no aprovecha al máximo los Hash en el minado y desconozco las consecuencias de esto.}

Agradezco toda la información posible.
  

I don't have any experience with 1070 but why don't you run two instances of Claymore, one with the 1070 cards, the other one with the 570

[MinerosYV]

Anyone has a working verge pool for someone in the US east? I tried every pool and the best I found is NL pool and I'm only getting 60% of the payout I should be getting. Unless every calculator is wrong..

I have 70 mining rigs so this is quite a big problem for me

You are welcome to try www.pool2mine.com most of the rigs are ours hence the low fee

You could try Yenten as a Third coin to if you like

[leonix007]

Hello. I use Claymore with nicehash pool to mine. I want to ask which pool is better for mining ETH or ALTcoins.

Depends on what coins you want to mine, nicehash pays on BTC, if you want other pools to pay with same btc miningpoolhub offers auto exchange with your mining payout.

For ETH recommended is Ethermine.org though you are paid in ETH so basically you need an eth wallet

[rorschach1]

New version working more stable with same hashrate on my rigs. Thank you

[tuljan]

I have problems with reading gpu temps, claymore shows fan speeds and temps but afterburner is showing 0 for both.
I think win10 update is doing it's think again, i just can't make it stop from updating over and over again.

[dgser]

Regarding dcri translation from single mining to dual mining blake2s:

Has anyone found a simple translation from the auto dcri settings Claymore determines in single mining to an appropriate setting for dual mining?

For instance, if auto setting result for single mining is 6,8,8,12,8,8 what would be an appropriate setting for dual mining? Without manually tweaking and setting each card.

Thanks

[BlackPrapor]

Wanted to try out solo mining XVG on AMD cards with claymore. But it turns out that it doesn't support solo for blake2s. Eagerly waiting for solo to be supported. 

[Vann]

I have problems with reading gpu temps, claymore shows fan speeds and temps but afterburner is showing 0 for both.
I think win10 update is doing it's think again, i just can't make it stop from updating over and over again.

Afterburner doesn't work with the Crimson compute mode drivers and more than three cards. You can set the core clock/memory clock/undervolt/fan speed directly in the Claymore configuration file or create profiles using OverdriveNtool, as explained on www.mining.help.

To keep Windows Update from modifying your drivers, disable drivers updates in the Group Policy Editor.

Windows key+R ==> Type gpedit and hit Enter ==> Navigate to: Computer Configuration ==> Administrative Templates ==> Windows Components ==> Windows Update and set 'Do not include drivers with Windows Update' to enabled.

[gedeonodn]

I'm mining second coin on NiceHash. In one moment profitable is B2S, in other Keccak.

On April 12 began troubles with keccak, 100% shares rejected. Error example:

12:57:12:601   bff7700   buf: {"id":13,"result":false,"error":[1,"Share above target.",null]}

It jump from normal mining to total rejects
https://ibb.co/eYNYrn

How to fix this?

[iase]

Hello!

'Claymore's Dual Ethereum Miner' is now available in the hellominer.com pool.

How to use:
EthDcrMiner64.exe -epool eth-us1.hellominer.com:1100 -ewal YourEthereumAddress.YourWorkerName/YourEmail -epsw x

Site:
https://hellominer.com

Best Regards

ETH+monero can i mining dual?

[Mashy81]

No. They both memory intensive

[ermis1975]

Hello. I use nanopool. And I the hashrate that nanopool reports is not always the same as  claymore's. Is that normal?

[Ursul0]

Hello. I use nanopool. And I the hashrate that nanopool reports is not always the same as  claymore's. Is that normal?

there're many possible factors that can be at play:
1) the rate is reported by claymore, but it may include"bad calculations" - incorrect shares due to overclock for instance
2) some of the shares are arriving too late - stale shares - check how these are calculated on your pools
3) pools are not very transparent and may steal some of your hash

[ermis1975]

I dont have incorrect shares or bad shares, or the message that my card may be much overclocked.
Is there a pool that dont "steals " shares, or bad calculations (sonetimes I saw that the hashrate is higher than the real, an some other times lower...)?