abhiseshakana
Legendary
Offline
Activity: 2366
Merit: 2273
From Zero to 2 times Self-Made Legendary
|
|
May 13, 2018, 02:04:50 PM |
|
I have noticed one of my mining rig stop or restart every so often and I was wondering if anyone could help me find a solution to this problem. This is my bat file setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool us-east.ethash-hub.miningpoolhub.com:20535 -ewal arkalab.eth01 -eworker arkalab.eth01 -epsw x -esm 2 -mode 1 -platform 2 -cclock -200,-200,-200,-200,-200,-200 -mclock +650,+650,+650,+600,+600,+600 -powlim -30,-30,-30,-30,-30,-30 -tt -70,-70,-70,-70,-80,-85 pause and this is my Log File for the issue 05:32:29:039 3d8 ETH: 05/13/18-05:32:29 - New job from us-east.ethash-hub.miningpoolhub.com:20535 05:32:29:041 3d8 target: 0x00000000ffb34c02 (diff: 4300MH), epoch 186(2.45GB) 05:32:29:043 3d8 ETH - Total Speed: 214.160 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:02 05:32:29:045 3d8 ETH: GPU0 32.990 Mh/s, GPU1 33.097 Mh/s, GPU2 33.111 Mh/s, GPU3 31.570 Mh/s, GPU4 51.967 Mh/s, GPU5 31.426 Mh/s 05:32:29:473 212c checked ETH share on CPU, spent 5ms 05:32:29:475 212c sent: {"id": 12, "method": "mining.submit", "params": ["arkalab.eth01","e00e","0x855cbfac0099e783","0x8aa4b6811007cfcbcc6f3dce84fc9d2b67defc1c42c7a265a2be7f69ccc39de8","0x8ed1fe8e7a45e7cc250afd976c2b9ecb246f627904589cd8b1fd46920f7099ac"]}
05:32:29:477 212c ETH: put share nonce 855cbfac0099e783 05:32:29:481 3d8 ETH: 05/13/18-05:32:29 - SHARE FOUND - (GPU 2) 05:32:29:721 3d8 buf: {"id":12,"result":true,"error":null}
05:32:29:722 3d8 ETH: Share accepted (250 ms)!
05:32:42:908 e7c GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:913 e7c GPU 5, GpuMiner kx failed 1 05:32:42:915 e7c Set global fail flag, failed GPU5 05:32:42:917 e7c GPU 5 failed 05:32:42:919 252c GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:925 252c GPU 5, GpuMiner kx failed 1 05:32:42:928 19c0 GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:930 212c GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:927 252c Set global fail flag, failed GPU5 05:32:42:937 252c GPU 5 failed 05:32:42:941 212c GPU 2, GpuMiner kx failed 1 05:32:42:948 19c0 GPU 0, GpuMiner kx failed 1 05:32:42:947 212c Set global fail flag, failed GPU2 05:32:42:954 e8c GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:952 19c0 Set global fail flag, failed GPU0 05:32:42:958 212c GPU 2 failed 05:32:42:964 1b9c GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:967 e8c GPU 1, GpuMiner kx failed 1 05:32:42:970 19c0 GPU 0 failed 05:32:42:972 1f44 GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:974 1b9c GPU 2, GpuMiner kx failed 1 05:32:42:976 2790 GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:980 2790 GPU 4, GpuMiner kx failed 1 05:32:42:985 2790 Set global fail flag, failed GPU4 05:32:42:988 2790 GPU 4 failed 05:32:42:976 1b9c Set global fail flag, failed GPU2 05:32:42:979 3d8 sent: {"id":6,"worker":"arkalab.eth01","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x6f5f8bc", "0x0000000000000000000000000000000000000000000000000000000016477d18"]}
05:32:42:970 e8c Set global fail flag, failed GPU1 05:32:42:995 e8c GPU 1 failed 05:32:42:999 2494 GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:002 2328 GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:008 1b9c GPU 2 failed 05:32:43:014 1f44 GPU 0, GpuMiner kx failed 1 05:32:43:020 1f44 Set global fail flag, failed GPU0 05:32:43:029 1f44 GPU 0 failed 05:32:43:032 2328 GPU 4, GpuMiner kx failed 1 05:32:43:039 2b4 GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:041 2494 GPU 3, GpuMiner kx failed 1 05:32:43:038 2328 Set global fail flag, failed GPU4 05:32:43:047 2328 GPU 4 failed 05:32:43:044 2494 Set global fail flag, failed GPU3 05:32:43:054 2b4 GPU 1, GpuMiner kx failed 1 05:32:43:063 2494 GPU 3 failed 05:32:43:070 2588 GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:062 2b4 Set global fail flag, failed GPU1 05:32:43:079 2588 GPU 3, GpuMiner kx failed 1 05:32:43:085 2b4 GPU 1 failed 05:32:43:085 2588 Set global fail flag, failed GPU3 05:32:43:089 2588 GPU 3 failed 05:32:43:221 3d8 buf: {"id":6,"result":true,"error":null}
05:32:43:934 bb0 em hbt: 0, fm hbt: 78, 05:32:43:935 bb0 watchdog - thread 0 (gpu0), hb time 1188 05:32:43:936 bb0 watchdog - thread 1 (gpu0), hb time 1063 05:32:43:938 bb0 watchdog - thread 2 (gpu1), hb time 1110 05:32:43:939 bb0 watchdog - thread 3 (gpu1), hb time 1235 05:32:43:940 bb0 watchdog - thread 4 (gpu2), hb time 1172 05:32:43:942 bb0 watchdog - thread 5 (gpu2), hb time 1047 05:32:43:943 bb0 watchdog - thread 6 (gpu3), hb time 1063 05:32:43:945 bb0 watchdog - thread 7 (gpu3), hb time 1188 05:32:43:946 bb0 watchdog - thread 8 (gpu4), hb time 1188 05:32:43:947 bb0 watchdog - thread 9 (gpu4), hb time 1047 05:32:43:949 bb0 watchdog - thread 10 (gpu5), hb time 1406 05:32:43:950 bb0 watchdog - thread 11 (gpu5), hb time 1953 05:32:43:951 bb0 WATCHDOG: GPU error, you need to restart miner :( 05:32:45:414 bb0 Restarting OK, exit...
And how to put the right value for -eres function.The default value is 2, but i dont know what the effect if i increase or decrease the value through this -eres command line
|
| | | . .Duelbits. | | | █▀▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄▄ | TRY OUR
NEW UNIQUE GAMES! | | . ..DICE... | ███████████████████████████████ ███▀▀ ▀▀███ ███ ▄▄▄▄ ▄▄▄▄ ███ ███ ██████ ██████ ███ ███ ▀████▀ ▀████▀ ███ ███ ███ ███ ███ ███ ███ ███ ▄████▄ ▄████▄ ███ ███ ██████ ██████ ███ ███ ▀▀▀▀ ▀▀▀▀ ███ ███▄▄ ▄▄███ ███████████████████████████████ | . .MINES. | ███████████████████████████████ ████████████████████████▄▀▄████ ██████████████▀▄▄▄▀█████▄▀▄████ ████████████▀ █████▄▀████ █████ ██████████ █████▄▀▀▄██████ ███████▀ ▀████████████ █████▀ ▀██████████ █████ ██████████ ████▌ ▐█████████ █████ ██████████ ██████▄ ▄███████████ ████████▄▄ ▄▄█████████████ ███████████████████████████████ | . .PLINKO. | ███████████████████████████████ █████████▀▀▀ ▀▀▀█████████ ██████▀ ▄▄███ ███ ▀██████ █████ ▄▀▀ █████ ████ ▀ ████ ███ ███ ███ ███ ███ ███ ████ ████ █████ █████ ██████▄ ▄██████ █████████▄▄▄ ▄▄▄█████████ ███████████████████████████████ | 10,000x MULTIPLIER | │ | NEARLY UP TO .50%. REWARDS | | | ▀▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄▄█ |
|
|
|
DeDeRa
Newbie
Offline
Activity: 8
Merit: 0
|
|
May 13, 2018, 03:05:57 PM |
|
6x Sapphire Nitro+ RX 580 8GB with Micron memory clocked at 1170/2200MHz with 850/850mv and -20% power limit doing 192.9 mhs eth at little under 810w. Using the nanopool i get average hashrates over the reported ones. (usually, 4 out of 7 days, in the rest, really close to reported, max 10 mhs less) PS: Check the GPUz reported consumption. 80w... Also check my highest temps which are 51 and 52* degrees celcius with the fan at only 37% in a warm room, around 25* today, for example. One last thing, no incorrect shares, not even 1 memory error reported in hwinfo, not one. https://image.ibb.co/bygsTy/32324939_1663807277070731_5687913318526746624_o.jpghttps://image.ibb.co/euOjad/32416549_1663806050404187_7786284067036594176_n.jpghttps://image.ibb.co/hQ2cvd/32423238_1663806450404147_7487452397338361856_n.jpg
|
|
|
|
alizali
Newbie
Offline
Activity: 197
Merit: 0
|
|
May 13, 2018, 04:05:05 PM |
|
if you know the reason say it DO NOT SPAM Please be more specific. What Windows? What cards? What drivers? On my Windows 10 x64 Pro AMD 18.3.4 on RX 580 cvddc works. On 270X didn't work. windows 10 X64 AMD 22.19.695 (blockchain driver) rx 470
|
|
|
|
spyfly
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 13, 2018, 04:10:15 PM |
|
what device do you have to meassure de electrical power
|
|
|
|
UnclWish
|
|
May 13, 2018, 04:15:10 PM |
|
if you know the reason say it DO NOT SPAM Please be more specific. What Windows? What cards? What drivers? On my Windows 10 x64 Pro AMD 18.3.4 on RX 580 cvddc works. On 270X didn't work. windows 10 X64 AMD 22.19.695 (blockchain driver) rx 470 Use 18.3.4. driver with ati dirvers patcher.
|
|
|
|
DeDeRa
Newbie
Offline
Activity: 8
Merit: 0
|
|
May 13, 2018, 04:17:36 PM |
|
TPLink HS110 dude.
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
May 13, 2018, 06:30:15 PM |
|
Claymore 11.7 has been running well for me with only the occasional slowdown of card for a couple of minutes only to pick back up to speed.
My only problem is that I can't reliably STOP the program. I get a BSD from a driver fault whenever I try to stop. I've tried most of this year's drivers from the 18.2 in Feb to the one before the latest. I'm in no hurry to be current on my driver under Win10 but I am looking for that stability. No memory errors and nothing crazy in the overclocking realm. I'm about 28.5MHs on each of my 580s.
I do use DDU in Safe Mode when I switch drivers to get the cleanest possible install.
Any thoughts about where to look?
|
|
|
|
spyfly
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 13, 2018, 08:29:08 PM |
|
|
|
|
|
BS001
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 13, 2018, 10:02:52 PM |
|
Is it normal that the rig would crash after some time if I mix hynix and elpida GPUs? I have 4 Sapphire Nitro+ 570 with elpida memory and 2 Sapphire Nitro+ 570 with hynix memory... if I run them separately then rig is stable, but as soon as I start to mix GPUs with different memory types on one rig... I would see crashes, reboots, etc... is that normal? Any ideas?
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 13, 2018, 10:56:24 PM |
|
I have noticed one of my mining rig stop or restart every so often and I was wondering if anyone could help me find a solution to this problem. This is my bat file setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool us-east.ethash-hub.miningpoolhub.com:20535 -ewal arkalab.eth01 -eworker arkalab.eth01 -epsw x -esm 2 -mode 1 -platform 2 -cclock -200,-200,-200,-200,-200,-200 -mclock +650,+650,+650,+600,+600,+600 -powlim -30,-30,-30,-30,-30,-30 -tt -70,-70,-70,-70,-80,-85 pause and this is my Log File for the issue 05:32:29:039 3d8 ETH: 05/13/18-05:32:29 - New job from us-east.ethash-hub.miningpoolhub.com:20535 05:32:29:041 3d8 target: 0x00000000ffb34c02 (diff: 4300MH), epoch 186(2.45GB) 05:32:29:043 3d8 ETH - Total Speed: 214.160 Mh/s, Total Shares: 6, Rejected: 0, Time: 00:02 05:32:29:045 3d8 ETH: GPU0 32.990 Mh/s, GPU1 33.097 Mh/s, GPU2 33.111 Mh/s, GPU3 31.570 Mh/s, GPU4 51.967 Mh/s, GPU5 31.426 Mh/s 05:32:29:473 212c checked ETH share on CPU, spent 5ms 05:32:29:475 212c sent: {"id": 12, "method": "mining.submit", "params": ["arkalab.eth01","e00e","0x855cbfac0099e783","0x8aa4b6811007cfcbcc6f3dce84fc9d2b67defc1c42c7a265a2be7f69ccc39de8","0x8ed1fe8e7a45e7cc250afd976c2b9ecb246f627904589cd8b1fd46920f7099ac"]}
05:32:29:477 212c ETH: put share nonce 855cbfac0099e783 05:32:29:481 3d8 ETH: 05/13/18-05:32:29 - SHARE FOUND - (GPU 2) 05:32:29:721 3d8 buf: {"id":12,"result":true,"error":null}
05:32:29:722 3d8 ETH: Share accepted (250 ms)!
05:32:42:908 e7c GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:913 e7c GPU 5, GpuMiner kx failed 1 05:32:42:915 e7c Set global fail flag, failed GPU5 05:32:42:917 e7c GPU 5 failed 05:32:42:919 252c GPU 5, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:925 252c GPU 5, GpuMiner kx failed 1 05:32:42:928 19c0 GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:930 212c GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:927 252c Set global fail flag, failed GPU5 05:32:42:937 252c GPU 5 failed 05:32:42:941 212c GPU 2, GpuMiner kx failed 1 05:32:42:948 19c0 GPU 0, GpuMiner kx failed 1 05:32:42:947 212c Set global fail flag, failed GPU2 05:32:42:954 e8c GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:952 19c0 Set global fail flag, failed GPU0 05:32:42:958 212c GPU 2 failed 05:32:42:964 1b9c GPU 2, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:967 e8c GPU 1, GpuMiner kx failed 1 05:32:42:970 19c0 GPU 0 failed 05:32:42:972 1f44 GPU 0, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:974 1b9c GPU 2, GpuMiner kx failed 1 05:32:42:976 2790 GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:42:980 2790 GPU 4, GpuMiner kx failed 1 05:32:42:985 2790 Set global fail flag, failed GPU4 05:32:42:988 2790 GPU 4 failed 05:32:42:976 1b9c Set global fail flag, failed GPU2 05:32:42:979 3d8 sent: {"id":6,"worker":"arkalab.eth01","jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x6f5f8bc", "0x0000000000000000000000000000000000000000000000000000000016477d18"]}
05:32:42:970 e8c Set global fail flag, failed GPU1 05:32:42:995 e8c GPU 1 failed 05:32:42:999 2494 GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:002 2328 GPU 4, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:008 1b9c GPU 2 failed 05:32:43:014 1f44 GPU 0, GpuMiner kx failed 1 05:32:43:020 1f44 Set global fail flag, failed GPU0 05:32:43:029 1f44 GPU 0 failed 05:32:43:032 2328 GPU 4, GpuMiner kx failed 1 05:32:43:039 2b4 GPU 1, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:041 2494 GPU 3, GpuMiner kx failed 1 05:32:43:038 2328 Set global fail flag, failed GPU4 05:32:43:047 2328 GPU 4 failed 05:32:43:044 2494 Set global fail flag, failed GPU3 05:32:43:054 2b4 GPU 1, GpuMiner kx failed 1 05:32:43:063 2494 GPU 3 failed 05:32:43:070 2588 GPU 3, GpuMiner cu_k1 failed 4, unspecified launch failure 05:32:43:062 2b4 Set global fail flag, failed GPU1 05:32:43:079 2588 GPU 3, GpuMiner kx failed 1 05:32:43:085 2b4 GPU 1 failed 05:32:43:085 2588 Set global fail flag, failed GPU3 05:32:43:089 2588 GPU 3 failed 05:32:43:221 3d8 buf: {"id":6,"result":true,"error":null}
05:32:43:934 bb0 em hbt: 0, fm hbt: 78, 05:32:43:935 bb0 watchdog - thread 0 (gpu0), hb time 1188 05:32:43:936 bb0 watchdog - thread 1 (gpu0), hb time 1063 05:32:43:938 bb0 watchdog - thread 2 (gpu1), hb time 1110 05:32:43:939 bb0 watchdog - thread 3 (gpu1), hb time 1235 05:32:43:940 bb0 watchdog - thread 4 (gpu2), hb time 1172 05:32:43:942 bb0 watchdog - thread 5 (gpu2), hb time 1047 05:32:43:943 bb0 watchdog - thread 6 (gpu3), hb time 1063 05:32:43:945 bb0 watchdog - thread 7 (gpu3), hb time 1188 05:32:43:946 bb0 watchdog - thread 8 (gpu4), hb time 1188 05:32:43:947 bb0 watchdog - thread 9 (gpu4), hb time 1047 05:32:43:949 bb0 watchdog - thread 10 (gpu5), hb time 1406 05:32:43:950 bb0 watchdog - thread 11 (gpu5), hb time 1953 05:32:43:951 bb0 WATCHDOG: GPU error, you need to restart miner :( 05:32:45:414 bb0 Restarting OK, exit...
And how to put the right value for -eres function.The default value is 2, but i dont know what the effect if i increase or decrease the value through this -eres command line start with -tt from 80, 85 to 70... than lower clocks a bit...
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 13, 2018, 10:57:15 PM |
|
Claymore 11.7 has been running well for me with only the occasional slowdown of card for a couple of minutes only to pick back up to speed.
My only problem is that I can't reliably STOP the program. I get a BSD from a driver fault whenever I try to stop. I've tried most of this year's drivers from the 18.2 in Feb to the one before the latest. I'm in no hurry to be current on my driver under Win10 but I am looking for that stability. No memory errors and nothing crazy in the overclocking realm. I'm about 28.5MHs on each of my 580s.
I do use DDU in Safe Mode when I switch drivers to get the cleanest possible install.
Any thoughts about where to look?
What bioses?
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 13, 2018, 10:58:59 PM |
|
Is it normal that the rig would crash after some time if I mix hynix and elpida GPUs? I have 4 Sapphire Nitro+ 570 with elpida memory and 2 Sapphire Nitro+ 570 with hynix memory... if I run them separately then rig is stable, but as soon as I start to mix GPUs with different memory types on one rig... I would see crashes, reboots, etc... is that normal? Any ideas? Set clocks and voltages for each card, not same for elpida and hynix. Also what bioses you use?
|
|
|
|
BS001
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 13, 2018, 11:07:16 PM |
|
Is it normal that the rig would crash after some time if I mix hynix and elpida GPUs? I have 4 Sapphire Nitro+ 570 with elpida memory and 2 Sapphire Nitro+ 570 with hynix memory... if I run them separately then rig is stable, but as soon as I start to mix GPUs with different memory types on one rig... I would see crashes, reboots, etc... is that normal? Any ideas? Set clocks and voltages for each card, not same for elpida and hynix. Also what bioses you use? Original with timings from 1500. I get 30 Mh on elpida and 29 on hynix, I tried running both down clocked to 1100 and 1800 and was getting 26 Mh but they still crashed after like 20 or 30 minutes. But as soon as I remove elpida GPUs or Hynix GPUs, the problems stop, had it running for 2 days without issues - only with one type of memory on one rig. Doesn't make any sense...
|
|
|
|
bluspirit
Jr. Member
Offline
Activity: 70
Merit: 3
|
|
May 14, 2018, 12:08:43 AM |
|
@claymore can you maybe fix miner for gpu temp monitor when i use MS remote desktop, and run miner .. only 1 gpu show temp when i run minier via teamviver, show all gpu temp and fan %, or i run local .. via keyboard and monitor
but, teamviver is not free, and from time to time block conncection and you must wait for another. And MS remote desktop is builed in, free and working great
It is not related to the miner, the reason is in Windows and AMD drivers. @claymore Hi, I have the same problem ... only GPU0 shows temp Here I have win10 pro 1709 with drivers 18.3.4 and your miner v11.7: 00: 30: 39: 219 1e0c ETH: 05/14 / 18-00: 30: 39 - New job from eu1.ethermine.org:5555 00: 30: 39: 219 1e0c target: 0x0000000112e0be82 (diff: 4000MH), epoch 186 (2.45GB) 00: 30: 39: 219 1e0c gpu # 1 dt 0.15 (0%, good) 00: 30: 39: 219 1e0c ETH - Total Speed: 61.963 Mh / s, Total Shares: 122, Rejected: 0, Time: 02:17 00: 30: 39: 235 1e0c ETH: GPU0 30.854 Mh / s, GPU1 31.109 Mh / s 00: 30: 41: 829 d50 GPU 0 temp = 56, old fan speed = 53, new fan speed = 39 00: 30: 43: 438 1e0c ETH: checking pool connection ...
Windows remote desktop works well with other programs and also other miners I run from command ... they show temp of all GPUs.
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 14, 2018, 12:36:39 AM |
|
Is it normal that the rig would crash after some time if I mix hynix and elpida GPUs? I have 4 Sapphire Nitro+ 570 with elpida memory and 2 Sapphire Nitro+ 570 with hynix memory... if I run them separately then rig is stable, but as soon as I start to mix GPUs with different memory types on one rig... I would see crashes, reboots, etc... is that normal? Any ideas? Set clocks and voltages for each card, not same for elpida and hynix. Also what bioses you use? Original with timings from 1500. I get 30 Mh on elpida and 29 on hynix, I tried running both down clocked to 1100 and 1800 and was getting 26 Mh but they still crashed after like 20 or 30 minutes. But as soon as I remove elpida GPUs or Hynix GPUs, the problems stop, had it running for 2 days without issues - only with one type of memory on one rig. Doesn't make any sense... 4 cards work, 2 cards work, 6 not? Looks like latest windows update...If you can test 2 elpidas with 2 hynix to be shure
|
|
|
|
svdinu
Newbie
Offline
Activity: 34
Merit: 0
|
|
May 14, 2018, 02:20:29 AM |
|
@claymore can you maybe fix miner for gpu temp monitor when i use MS remote desktop, and run miner .. only 1 gpu show temp when i run minier via teamviver, show all gpu temp and fan %, or i run local .. via keyboard and monitor
but, teamviver is not free, and from time to time block conncection and you must wait for another. And MS remote desktop is builed in, free and working great
It is not related to the miner, the reason is in Windows and AMD drivers. @claymore Hi, I have the same problem ... only GPU0 shows temp Here I have win10 pro 1709 with drivers 18.3.4 and your miner v11.7: 00: 30: 39: 219 1e0c ETH: 05/14 / 18-00: 30: 39 - New job from eu1.ethermine.org:5555 00: 30: 39: 219 1e0c target: 0x0000000112e0be82 (diff: 4000MH), epoch 186 (2.45GB) 00: 30: 39: 219 1e0c gpu # 1 dt 0.15 (0%, good) 00: 30: 39: 219 1e0c ETH - Total Speed: 61.963 Mh / s, Total Shares: 122, Rejected: 0, Time: 02:17 00: 30: 39: 235 1e0c ETH: GPU0 30.854 Mh / s, GPU1 31.109 Mh / s 00: 30: 41: 829 d50 GPU 0 temp = 56, old fan speed = 53, new fan speed = 39 00: 30: 43: 438 1e0c ETH: checking pool connection ...
Windows remote desktop works well with other programs and also other miners I run from command ... they show temp of all GPUs. Disable Crossfire
|
|
|
|
SparkPool
Newbie
Offline
Activity: 18
Merit: 1
|
|
May 14, 2018, 03:44:40 AM |
|
Good software.
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
May 14, 2018, 04:32:46 AM |
|
Claymore 11.7 has been running well for me with only the occasional slowdown of card for a couple of minutes only to pick back up to speed.
My only problem is that I can't reliably STOP the program. I get a BSD from a driver fault whenever I try to stop. I've tried most of this year's drivers from the 18.2 in Feb to the one before the latest. I'm in no hurry to be current on my driver under Win10 but I am looking for that stability. No memory errors and nothing crazy in the overclocking realm. I'm about 28.5MHs on each of my 580s.
I do use DDU in Safe Mode when I switch drivers to get the cleanest possible install.
Any thoughts about where to look?
What bioses? I'm running Ultramix 3.1 with Samsung memory and just a strap copy with the Hynix ... 1750 to 2000. All are at 2000MHz. They really clip along fairly well. I just can't reliably stop them. I suppose it could be worse.
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
May 14, 2018, 10:01:00 AM |
|
Claymore 11.7 has been running well for me with only the occasional slowdown of card for a couple of minutes only to pick back up to speed.
My only problem is that I can't reliably STOP the program. I get a BSD from a driver fault whenever I try to stop. I've tried most of this year's drivers from the 18.2 in Feb to the one before the latest. I'm in no hurry to be current on my driver under Win10 but I am looking for that stability. No memory errors and nothing crazy in the overclocking realm. I'm about 28.5MHs on each of my 580s.
I do use DDU in Safe Mode when I switch drivers to get the cleanest possible install.
Any thoughts about where to look?
What bioses? I'm running Ultramix 3.1 with Samsung memory and just a strap copy with the Hynix ... 1750 to 2000. All are at 2000MHz. They really clip along fairly well. I just can't reliably stop them. I suppose it could be worse. Well that happens with too much oc
|
|
|
|
mijnerke
Newbie
Offline
Activity: 10
Merit: 0
|
|
May 14, 2018, 10:12:07 AM |
|
Built a new rig and my hashrate is down...
Old rig: MB: ASROCK H81 Pro BTC 2.0 CPU: Intel Pentium G3260 (3.3GHz) RAM: 8GB - 1333MHz 6GPU
New rig: MB: Asus B250 Mining Expert CPU: Intel Celeron G3930 (2,9Ghz) RAM: 8GB - 2400MHz updated Bios + Chipset to latest version 9GPU
Dual mining ETH+XVG with Claymore 11.7 Both times Radeon drivers 18.3.1, all compute. 4 of my cards that used to mine ETH at 30Mh/s and now do only 28,3 in my new rig... Those cards are on the same PSU I used in the old rig.
OC/UV used to be 1130 / 2035 / 890 / 890 Tried pushing them to 1130 / 2100 / 880 / 880, but I get minimal gain and seem to have touched the ceiling as I start getting invalid shares and have to get back to safer levels.
This might seem silly, but is it possible I have to flash the BIOS of the GPUs again as the configuration is different? Latest Windows10, so problems with ATIFlash to check... :-(
Thanks for any help
|
|
|
|
|