ermis1975
Member
Offline
Activity: 198
Merit: 10
|
|
June 23, 2018, 05:42:22 AM |
|
I have AMD and Nvidia cards in the same ring. AMD settings are ok. What I have to change to "start file" for NVIDIA? Can I control NVIDIA clocks etc from there like amd?
|
|
|
|
|
|
|
|
The block chain is the main innovation of Bitcoin. It is the
first distributed timestamping system.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
Bit_fan_talks
Jr. Member
Offline
Activity: 121
Merit: 1
|
|
June 23, 2018, 12:57:14 PM |
|
at last now i can use only MS RDC
tnx
|
|
|
|
Euro1121
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 23, 2018, 02:05:31 PM |
|
Hi everyone, I'm here because for the first time I'm trying to mine with claymore 11.8. But unfortunately it crash on startup. i had put my ethereum wallet address on start.bat.
ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x
before crashing on the screen it says:
ETH 2 pool are specified Main ethereum pool is eu1.ethermine.org:4444 DCR: 0 Pool is specified
my system is:
z270gt6 intel celeron g3930 4gb ram ssd120 gb MSI gtx 1060 6gb OC
I already changed the paging file at 36000MB
updated Motherboard bios
downloaded and set MSI afterburner with:
POWER LIMIT: 65% temp limit 85degrees not connected to power limit CORE CLOCK 0 MEMORY CLOCK 480 FAN SPEED AUTO
any suggestion is welcome :-)
thank you in advance!!!!
Copy\paste log file here. Are you mining on windows or Linux? if windows what is the windows version? this is the log 01:17:14:960 1830 Check and remove old log files... 01:17:14:960 1830 args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x 01:17:14:960 1830 01:17:14:960 1830 …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª 01:17:14:960 1830 ∫ Claymore's Dual GPU Miner - v11.8 ∫ 01:17:14:960 1830 ∫ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ∫ 01:17:14:960 1830 »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº 01:17:14:960 1830 01:17:14:960 1830 b591 01:17:15:179 1830 ETH: 2 pools are specified 01:17:15:179 1830 Main Ethereum pool is eu1.ethermine.org:4444 01:17:15:179 1830 DCR: 0 pool is specified
|
|
|
|
Bulltime
Newbie
Offline
Activity: 8
Merit: 1
|
|
June 23, 2018, 03:33:31 PM |
|
Please, no one of you is mining ethereum with nvidia through Ethermine in win 10?. I need someone to help me, none of the versions of Claymore work.
Complete system specs including whats loaded on your HDD.SSD Then what issues are you running in to first to last.
|
|
|
|
mehudi
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 23, 2018, 05:03:50 PM |
|
Hi all,
after upgrading to Claymore 11.8 some of my rigs started restarting every 10 min or so. i've reinstalled drivers, checked connections.
i keep getting message in the log file that he GPUx has failed openGL and then 'server: accept failed with error: 10004'
i've got RX480 cards with 4 mb ram.
please help.
tbia
|
|
|
|
castillojim
Newbie
Offline
Activity: 17
Merit: 0
|
|
June 23, 2018, 08:10:13 PM |
|
Have problems with ethpill and 1080s with Claymore. Any solution yet?
|
|
|
|
Roadrage68
Newbie
Offline
Activity: 24
Merit: 0
|
|
June 23, 2018, 08:16:02 PM |
|
Hi everyone, I'm here because for the first time I'm trying to mine with claymore 11.8. But unfortunately it crash on startup. i had put my ethereum wallet address on start.bat.
ethDcrminer64.exe -epool eu1.ethermine.org:4444 -ewal "my address" -epsw x
before crashing on the screen it says:
ETH 2 pool are specified Main ethereum pool is eu1.ethermine.org:4444 DCR: 0 Pool is specified
my system is:
z270gt6 intel celeron g3930 4gb ram ssd120 gb MSI gtx 1060 6gb OC
I already changed the paging file at 36000MB
updated Motherboard bios
downloaded and set MSI afterburner with:
POWER LIMIT: 65% temp limit 85degrees not connected to power limit CORE CLOCK 0 MEMORY CLOCK 480 FAN SPEED AUTO
any suggestion is welcome :-)
thank you in advance!!!!
Copy\paste log file here. Are you mining on windows or Linux? if windows what is the windows version? this is the log 01:17:14:960 1830 Check and remove old log files... 01:17:14:960 1830 args: -epool eu1.ethermine.org:4444 -ewal 0xa4a1b5803ba8d8f04Dff2F6C6Dd9f6b16e8b10A4 -epsw x 01:17:14:960 1830 01:17:14:960 1830 …ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕª 01:17:14:960 1830 ∫ Claymore's Dual GPU Miner - v11.8 ∫ 01:17:14:960 1830 ∫ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ∫ 01:17:14:960 1830 »ÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕÕº 01:17:14:960 1830 01:17:14:960 1830 b591 01:17:15:179 1830 ETH: 2 pools are specified 01:17:15:179 1830 Main Ethereum pool is eu1.ethermine.org:4444 01:17:15:179 1830 DCR: 0 pool is specified Check your dpools.txt? And your epools.txt while you are at it.. Looks like something in this file may be active, no # in front of line..
|
|
|
|
TigTex
Jr. Member
Offline
Activity: 55
Merit: 5
|
|
June 23, 2018, 08:59:40 PM |
|
Don't use the "blockchain beta" driver. It is already included on the latest AMD adrenaline drivers from amd.com/drivers. Please stop spreading old news! -> go to amd.com/drivers and download the latest WHQL driver -> open the adrenaline control panel and change the settings from GRAPHICS to COMPUTE mode for EACH AMD CARD that you have. Reboot and recheck if compute mode is still enabled You should have more speed than using old blockchain driver that was created for testing purposes. Also it's the only driver that is fully compatible with windows 1803
you sure? i did not test the last drivers for rx series but i can say on vega the blockchain is at lease 5% faster than the adrenaline With RX580, adrenaline is faster than the blockchain drivers (<1%, minimal gains on ETH). No idea about the vega's
|
.::. TigTex .::. Good luck! Have a nice hash
|
|
|
davidzai
Newbie
Offline
Activity: 23
Merit: 0
|
|
June 24, 2018, 05:03:10 AM |
|
Anyone experience hashrate drop?
I am using GTX1070ti x 6 mining ETC at etc.ethermine.org. Already 1 week plus my average hashrate was 190mh/s. But since 13 hours ago, my average hashrate drop to 160mh/s.
Already restarted the rig, still the same... Running my rig on smos with claymore v11.8
|
|
|
|
robert1b
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 24, 2018, 07:48:58 AM |
|
My rig restart several times with a message WATCHDOG: GPU 3 hangs in OpenCL call, exit WATCHDOG: GPU 3 hangs in OpenCL call, exit This happened with different GPU. (Six RX580 Nitro+) working on Windows 10 In previous version, there was no restart. Rig working several days without restart. My config: -epsw x -tstop 85 -tt 60 -platform 1 -fanmin 10 -fanmax 100 -powlim -30 -cclock 1130 -mclock 2150 -cvddc 860 -mvddc 860 -dcri 14 -mode 1 -mport -3333 -asm 1 #-esm 1 -r >20 #-wd 0
ETH: 06/24/18-09:46:58 - New job from eu1.ethermine.org:4444 ETH - Total Speed: 182.289 Mh/s, Total Shares: 34, Rejected: 0, Time: 00:13 ETH: GPU0 30.386 Mh/s, GPU1 30.386 Mh/s, GPU2 30.384 Mh/s, GPU3 30.373 Mh/s, GPU4 30.377 Mh/s, GPU5 30.383 Mh/s GPU0 t=48C fan=33%, GPU1 t=49C fan=34%, GPU2 t=50C fan=33%, GPU3 t=48C fan=35%, GPU4 t=51C fan=35%, GPU5 t=50C fan=34%
|
|
|
|
Ruster87
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 24, 2018, 10:58:27 AM |
|
Hi all,
after upgrading to Claymore 11.8 some of my rigs started restarting every 10 min or so. i've reinstalled drivers, checked connections.
i keep getting message in the log file that he GPUx has failed openGL and then 'server: accept failed with error: 10004'
i've got RX480 cards with 4 mb ram.
please help.
tbia
Add me on telegram tommyzjh. I do tuning and diagnostics for a fee
|
|
|
|
hugomenezes
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 24, 2018, 11:03:40 AM |
|
Hi all, I need some help to resolve a problem on my Rig. My Specs is: Motherboard: ASUS B250 Miner Expert with lastest bios RAM: 4GB HDD:320GB CPU: G4400 VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB PSU: 2000W Miner: Claymore 11.8 OS: Windows 10 Pro
I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s. I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.
Anyone had this problem? Sry for my poor english.
Regards
|
|
|
|
damba_
Jr. Member
Offline
Activity: 150
Merit: 3
|
|
June 24, 2018, 11:23:00 AM |
|
Hi all, I need some help to resolve a problem on my Rig. My Specs is: Motherboard: ASUS B250 Miner Expert with lastest bios RAM: 4GB HDD:320GB CPU: G4400 VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB PSU: 2000W Miner: Claymore 11.8 OS: Windows 10 Pro
I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s. I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.
Anyone had this problem? Sry for my poor english.
Regards
Did you switch your gpu workload from graphics to compute? In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cardsThat could be the problem.
|
|
|
|
hugomenezes
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 24, 2018, 11:34:03 AM |
|
Hi all, I need some help to resolve a problem on my Rig. My Specs is: Motherboard: ASUS B250 Miner Expert with lastest bios RAM: 4GB HDD:320GB CPU: G4400 VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB PSU: 2000W Miner: Claymore 11.8 OS: Windows 10 Pro
I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s. I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.
Anyone had this problem? Sry for my poor english.
Regards
Did you switch your gpu workload from graphics to compute? In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cardsThat could be the problem. Yes
|
|
|
|
kpatrik
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 24, 2018, 12:03:39 PM |
|
Hi all, I need some help to resolve a problem on my Rig. My Specs is: Motherboard: ASUS B250 Miner Expert with lastest bios RAM: 4GB HDD:320GB CPU: G4400 VGA: MSI RX580 Armor 8GB + Gigabyte RX580 Gaming 8GB PSU: 2000W Miner: Claymore 11.8 OS: Windows 10 Pro
I had Windows 10 with all updates, the drivers all updated and my problem is the mh/s speed, i only get 22mh/s i try to put diferent clocks speed on GPU and RAM but the result its the same 22mh/s. I build other RIG with the same hardware and i get 30mh/s on RX580 with clocks GPU 1250Mhz 0.950v RAM 2150Mhz 0.950v.
Anyone had this problem? Sry for my poor english.
Regards
Did you switch your gpu workload from graphics to compute? In Claymore 11.6 or newer you can: press "y" key to turn on "Compute Mode" in AMD drivers for all cardsThat could be the problem. Yes Try this mining OS for free: MinerOne OS https://minerone.net
|
|
|
|
bithead007
Newbie
Offline
Activity: 22
Merit: 0
|
|
June 24, 2018, 05:11:26 PM |
|
So I've got one machine with pretty bad mouse/sprite lagging. It starts when Ethereum mining starts. This machine was working fine and I had to rebuild it with a fresh Windows 10 install.
It's Windows 10, latest, all patches. ULPS is off, I have never used ethi so not thinking I need to start now. I did try ethi 1 and the hash rate dropped significantly and still lagging. Visual effects in Win 10 are off. I've tried everything I can think of and could use some ideas. GEForce software isn't installed (or at least I don't see it anyplace). Mix of RX580 cards and a couple of GTX 1060's. Radeon driver is the recent .5.1 and Nvidia is the latest one.
Help!
Thanks, CJ
|
|
|
|
Ruster87
Newbie
Offline
Activity: 13
Merit: 0
|
|
June 24, 2018, 11:36:45 PM |
|
So I've got one machine with pretty bad mouse/sprite lagging. It starts when Ethereum mining starts. This machine was working fine and I had to rebuild it with a fresh Windows 10 install.
It's Windows 10, latest, all patches. ULPS is off, I have never used ethi so not thinking I need to start now. I did try ethi 1 and the hash rate dropped significantly and still lagging. Visual effects in Win 10 are off. I've tried everything I can think of and could use some ideas. GEForce software isn't installed (or at least I don't see it anyplace). Mix of RX580 cards and a couple of GTX 1060's. Radeon driver is the recent .5.1 and Nvidia is the latest one.
Help!
Thanks, CJ
biostar board? check your task manager, is system interrupts cpu usage high?
|
|
|
|
ddminer
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 25, 2018, 04:04:29 AM |
|
Hi, I get ETC, sometimes my rig reboots, and Claymor's log comes to an end with the line NULNULNUL... Sometimes one hour, and sometimes works and 30, I can't understand in what the reason. Somebody knows that he means if the ravine comes to an end with NULNULNUL... https://c.radikal.ru/c32/1806/b3/9f8d39c76573t.jpg
|
|
|
|
Bug catcher
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 25, 2018, 11:22:56 AM |
|
Hi, I get ETC, sometimes my rig reboots, and Claymor's log comes to an end with the line NULNULNUL... Sometimes one hour, and sometimes works and 30, I can't understand in what the reason. Somebody knows that he means if the ravine comes to an end with NULNULNUL... https://c.radikal.ru/c32/1806/b3/9f8d39c76573t.jpgHave you tried to re-download claymore? Are you using the latest version? Maybe try another version and check if it gives you the same error... Have you checked if you are using the right drivers?
|
|
|
|
big_daddy
|
|
June 25, 2018, 11:57:09 AM |
|
Please, can someone share the cclock & mclock for msi 570 8GB, last drivers, compute mode on, Micron mem
my best results for now is only 28,5 mhs - 1150/2050
tnx!
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
|