Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Branko]

I didn't try to dual mining for a while, what coins are profitable these days as secondary?

There are none, since most of the dual mineable coins are basically GPU compute there was an ASIC released pretty much for all of them.

Even if you are mining at work and got free power its not even worth it then because each GPU will consume about 30-40 watts more power and will run hotter and emit much more heat. Not worth it to make a few pennies a day.

Back in June 2017, you could of made over $2 alone on SC just by dual mining it, not including the $7 daily ETH profits.

I know, I tried most of them but around New Year ASICS killed em all...now I see people mention
those Keccak based ones, but whattomine calculator doesn't even have that algo mentioned

[1713927518]

1713927518

[thameur]

hi everyone.
anyone have idea about this please
https://imgur.com/a/83FogCa

what cards u using and what is ur bat file?

4 r9 390 8g and 2 msi titanium 1070 ti

bat file here

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal ------------------------- -epsw x  -mode 1 -dcri 6

[BLNT]

I was running 7 1070's in each rig previously. Recently updated from an older version of Claymore, now can only run them with 6 cards (I have to unplug 1 card/rig so that it does not crash immediately).

Thoughts ?

[user0071]

I'm running 5 x rx570. I'm getting this issue with running Claymore all of a sudden with this rig. Effectively it seems to initialize well and then the cmd prompt just shuts down automatically. All I see in the logs  are the following :

Code:

22:39:05:467	2134	Pool eth-asia1.nanopool.org removed from the list
22:39:05:467	2134	ETH: 1 pool is specified
22:39:05:482	2134	Main Ethereum pool is asia1.ethermine.org:4444

<...>

1. Try different port/pool for example asia1.ethermine.org:5555
2. Try to increase your virtual memory to at least 4GB/GPU and use -eres 0

If fail then continue to troubleshoot with varying GPU, driver, etc...

Do you have any other suggestions, I'm getting the same issue with all gpu or one gpu. This is the same pool I use for my NVIDIA cards that works.

go to nanopool eth page under help, re config bat file and epools

I think I know the problem, when I run gpu-z i see that my compute is only on directcompute 5.0 anyone know how to get the opencl on it working? I downloaded the crimson blockhain driver so I'm shocked that it didn't do that....

I have had claymore 11.8 with adrenaline 18.5 driver working GREAT. Then, windows accidentally updated. Now i'm getting the same thing where it stops at

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

and then just sits there until it says miner can't initialize. I've reinstalled  drivers using DDU. turned off windows dfeneder (claymore isn't being shut down, so I don't think that's the problem). In Gpu Z, open CL is indeed not checked, but I thought these graphics cards RX 400 and 500 serious (currently testing on ONLY a single 570 since this is blowing up my brain) used Open GL. I've resintalled windows twice, basically did everything that I've always ever done and had working fine. Now, nothing. Claymore just sits there. What's weird, is when I run the start.bat file as administrator, then I get the "cannot find EthDcrMiner.64" but it starts up and doesn't close when I start it up non-admin so I really don't think that's the problem. Can ANYONE help? this has been like 2 solid days of troubleshooting.

[thuesdayb]

I didn't try to dual mining for a while, what coins are profitable these days as secondary?

There are none, since most of the dual mineable coins are basically GPU compute there was an ASIC released pretty much for all of them.

Even if you are mining at work and got free power its not even worth it then because each GPU will consume about 30-40 watts more power and will run hotter and emit much more heat. Not worth it to make a few pennies a day.

Back in June 2017, you could of made over $2 alone on SC just by dual mining it, not including the $7 daily ETH profits.

I know, I tried most of them but around New Year ASICS killed em all...now I see people mention
those Keccak based ones, but whattomine calculator doesn't even have that algo mentioned

check
https://whattomine.com/merged_coins/42-eth-smart

[bogdan_black]

can someone help pls ? i get this error.. i don"t know what to do.. please help me


20:59:20:827   1b14   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
20:59:20:839   1b14   º                Claymore's Dual GPU Miner - v11.8               º
20:59:20:858   1b14   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
20:59:20:867   1b14   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
20:59:20:877   1b14   
20:59:20:882   1b14   b591
20:59:21:104   1b14   ETH: 1 pool is specified
20:59:21:112   1b14   Main Ethereum pool is eu1.ethermine.org:5555
20:59:21:119   1b14   DCR: 0 pool is specified
20:59:23:121   1b14   OpenCL platform: AMD Accelerated Parallel Processing
20:59:23:126   1b14   OpenCL initializing...

20:59:23:130   1b14   AMD Cards available: 6
20:59:23:135   1b14   GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 1:0:0)
20:59:23:139   1b14   GPU #0 recognized as Radeon RX 470/570
20:59:23:144   1b14   GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 3:0:0)
20:59:23:148   1b14   GPU #1 recognized as Radeon RX 470/570
20:59:23:152   1b14   GPU #2: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 4:0:0)
20:59:23:157   1b14   GPU #2 recognized as Radeon RX 470/570
20:59:23:178   1b14   GPU #3: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 5:0:0)
20:59:23:182   1b14   GPU #3 recognized as Radeon RX 470/570
20:59:23:189   1b14   GPU #4: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 6:0:0)
20:59:23:196   1b14   GPU #4 recognized as Radeon RX 470/570
20:59:23:200   1b14   GPU #5: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 7:0:0)
20:59:23:210   1b14   GPU #5 recognized as Radeon RX 470/570
20:59:23:215   1b14   POOL/SOLO version
20:59:23:222   1b14   Platform: Windows
20:59:23:392   1b14   start building OpenCL program for GPU 0...
20:59:23:764   1b14   done
20:59:23:977   1b14   start building OpenCL program for GPU 1...
20:59:24:432   1b14   done
20:59:24:646   1b14   start building OpenCL program for GPU 2...
20:59:25:031   1b14   done
20:59:25:245   1b14   start building OpenCL program for GPU 3...
20:59:25:627   1b14   done
20:59:25:841   1b14   start building OpenCL program for GPU 4...
20:59:26:213   1b14   done
20:59:26:428   1b14   start building OpenCL program for GPU 5...
20:59:26:799   1b14   done
20:59:27:106   1b14   GPU #0: algorithm ASM 1
20:59:27:189   1b14   GPU #1: algorithm ASM 1
20:59:27:262   1b14   GPU #2: algorithm ASM 1
20:59:27:328   1b14   GPU #3: algorithm ASM 1
20:59:27:397   1b14   GPU #4: algorithm ASM 1
20:59:27:474   1b14   GPU #5: algorithm ASM 1
20:59:27:479   1b14   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
20:59:27:484   1b14   No NVIDIA CUDA GPUs detected.
20:59:27:489   1b14   Total cards: 6
20:59:27:493   1b14   No NVIDIA cards in the list, NVML library will not be used.

[jeremyismer]

I'm running 5 x rx570. I'm getting this issue with running Claymore all of a sudden with this rig. Effectively it seems to initialize well and then the cmd prompt just shuts down automatically. All I see in the logs  are the following :

Code:

22:39:05:467	2134	Pool eth-asia1.nanopool.org removed from the list
22:39:05:467	2134	ETH: 1 pool is specified
22:39:05:482	2134	Main Ethereum pool is asia1.ethermine.org:4444

<...>

1. Try different port/pool for example asia1.ethermine.org:5555
2. Try to increase your virtual memory to at least 4GB/GPU and use -eres 0

If fail then continue to troubleshoot with varying GPU, driver, etc...

Do you have any other suggestions, I'm getting the same issue with all gpu or one gpu. This is the same pool I use for my NVIDIA cards that works.

go to nanopool eth page under help, re config bat file and epools

I think I know the problem, when I run gpu-z i see that my compute is only on directcompute 5.0 anyone know how to get the opencl on it working? I downloaded the crimson blockhain driver so I'm shocked that it didn't do that....

I have had claymore 11.8 with adrenaline 18.5 driver working GREAT. Then, windows accidentally updated. Now i'm getting the same thing where it stops at

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

and then just sits there until it says miner can't initialize. I've reinstalled  drivers using DDU. turned off windows dfeneder (claymore isn't being shut down, so I don't think that's the problem). In Gpu Z, open CL is indeed not checked, but I thought these graphics cards RX 400 and 500 serious (currently testing on ONLY a single 570 since this is blowing up my brain) used Open GL. I've resintalled windows twice, basically did everything that I've always ever done and had working fine. Now, nothing. Claymore just sits there. What's weird, is when I run the start.bat file as administrator, then I get the "cannot find EthDcrMiner.64" but it starts up and doesn't close when I start it up non-admin so I really don't think that's the problem. Can ANYONE help? this has been like 2 solid days of troubleshooting.

What version of windows do you have now? It sounds like the 1803 problems. Roll back to the previous windows version

[bogdan_black]

can someone help pls ? i get this error.. i don"t know what to do.. please help me

Did you install nvidia drivers?

Yes ....   Radeon 18.5.1

[jeremyismer]

can someone help pls ? i get this error.. i don"t know what to do.. please help me

What are your specs? Windows version?

[DireWolfM14]

can someone help pls ? i get this error.. i don"t know what to do.. please help me
~snip

Post your command line and or config.txt file.

[javilee94]

Hello, I have an issue with my mining rig since epoch 200, I downloaded v11.8 from github since I can't find v11.9 (MEGA never downloads and I can't fond v11.9 for windows on google drive link).

Here is what I did,

I downloaded v11.8 (uploaded 20 days ago, according to GITHUB). Then I copied and pasted my epool from the claymore's older version, same as START MINING bat file.

Once I run bat file, it runs until it says:

"You can use  + and - keys to achieve best ETH speed, see "FINE TUNING" section in read me for details.

After that message, my computer gets HYPER slow, so I take like a minute to close claymore, then I must restart my mining rig.

By the way, I'm new to this forum so I don't know how to post pictures.

Thanks for your help.

[jeremyismer]

Hello, I have an issue with my mining rig since epoch 200, I downloaded v11.8 from github since I can't find v11.9 (MEGA never downloads and I can't fond v11.9 for windows on google drive link).

Here is what I did,

I downloaded v11.8 (uploaded 20 days ago, according to GITHUB). Then I copied and pasted my epool from the claymore's older version, same as START MINING bat file.

Once I run bat file, it runs until it says:

"You can use  + and - keys to achieve best ETH speed, see "FINE TUNING" section in read me for details.

After that message, my computer gets HYPER slow, so I take like a minute to close claymore, then I must restart my mining rig.

By the way, I'm new to this forum so I don't know how to post pictures.

Thanks for your help.

Don't use the github version, others in the forum have had trouble with it (not sure if it is genuine). 11.9 was a keccak fix, just use 11.7 or 11.8 from the first post links.

[javilee94]

Hello, I have an issue with my mining rig since epoch 200, I downloaded v11.8 from github since I can't find v11.9 (MEGA never downloads and I can't fond v11.9 for windows on google drive link).

Here is what I did,

I downloaded v11.8 (uploaded 20 days ago, according to GITHUB). Then I copied and pasted my epool from the claymore's older version, same as START MINING bat file.

Once I run bat file, it runs until it says:

"You can use  + and - keys to achieve best ETH speed, see "FINE TUNING" section in read me for details.

After that message, my computer gets HYPER slow, so I take like a minute to close claymore, then I must restart my mining rig.

By the way, I'm new to this forum so I don't know how to post pictures.

Thanks for your help.

Don't use the github version, otherwise in forum have had trouble with it (not sure if it is genuine). 11.9 was a keccak fix, just use 11.7 or 11.8 from the first post links.

So if I download 11.8 or 11.7 and paste my START MINING bat, everything should be fine?

[jeremyismer]

Hello, I have an issue with my mining rig since epoch 200, I downloaded v11.8 from github since I can't find v11.9 (MEGA never downloads and I can't fond v11.9 for windows on google drive link).

Here is what I did,

I downloaded v11.8 (uploaded 20 days ago, according to GITHUB). Then I copied and pasted my epool from the claymore's older version, same as START MINING bat file.

Once I run bat file, it runs until it says:

"You can use  + and - keys to achieve best ETH speed, see "FINE TUNING" section in read me for details.

After that message, my computer gets HYPER slow, so I take like a minute to close claymore, then I must restart my mining rig.

By the way, I'm new to this forum so I don't know how to post pictures.

Thanks for your help.

Don't use the github version, otherwise in forum have had trouble with it (not sure if it is genuine). 11.9 was a keccak fix, just use 11.7 or 11.8 from the first post links.

So if I download 11.8 or 11.7 and paste my START MINING bat, everything should be fine?

No guarantees, but it would at least rule out the github version problem...

What version windows are you running? Driver version? Bat file config...

[Call_Me_Bambi]

can someone help pls ? i get this error.. i don"t know what to do.. please help me


20:59:20:827   1b14   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
20:59:20:839   1b14   º                Claymore's Dual GPU Miner - v11.8               º
20:59:20:858   1b14   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
20:59:20:867   1b14   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
20:59:20:877   1b14   
20:59:20:882   1b14   b591
20:59:21:104   1b14   ETH: 1 pool is specified
20:59:21:112   1b14   Main Ethereum pool is eu1.ethermine.org:5555
20:59:21:119   1b14   DCR: 0 pool is specified
20:59:23:121   1b14   OpenCL platform: AMD Accelerated Parallel Processing
20:59:23:126   1b14   OpenCL initializing...

20:59:23:130   1b14   AMD Cards available: 6
20:59:23:135   1b14   GPU #0: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 1:0:0)
20:59:23:139   1b14   GPU #0 recognized as Radeon RX 470/570
20:59:23:144   1b14   GPU #1: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 3:0:0)
20:59:23:148   1b14   GPU #1 recognized as Radeon RX 470/570
20:59:23:152   1b14   GPU #2: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 4:0:0)
20:59:23:157   1b14   GPU #2 recognized as Radeon RX 470/570
20:59:23:178   1b14   GPU #3: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 5:0:0)
20:59:23:182   1b14   GPU #3 recognized as Radeon RX 470/570
20:59:23:189   1b14   GPU #4: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 6:0:0)
20:59:23:196   1b14   GPU #4 recognized as Radeon RX 470/570
20:59:23:200   1b14   GPU #5: Ellesmere (Radeon (TM) RX 470 Graphics), 8192 MB available, 32 compute units (pci bus 7:0:0)
20:59:23:210   1b14   GPU #5 recognized as Radeon RX 470/570
20:59:23:215   1b14   POOL/SOLO version
20:59:23:222   1b14   Platform: Windows
20:59:23:392   1b14   start building OpenCL program for GPU 0...
20:59:23:764   1b14   done
20:59:23:977   1b14   start building OpenCL program for GPU 1...
20:59:24:432   1b14   done
20:59:24:646   1b14   start building OpenCL program for GPU 2...
20:59:25:031   1b14   done
20:59:25:245   1b14   start building OpenCL program for GPU 3...
20:59:25:627   1b14   done
20:59:25:841   1b14   start building OpenCL program for GPU 4...
20:59:26:213   1b14   done
20:59:26:428   1b14   start building OpenCL program for GPU 5...
20:59:26:799   1b14   done
20:59:27:106   1b14   GPU #0: algorithm ASM 1
20:59:27:189   1b14   GPU #1: algorithm ASM 1
20:59:27:262   1b14   GPU #2: algorithm ASM 1
20:59:27:328   1b14   GPU #3: algorithm ASM 1
20:59:27:397   1b14   GPU #4: algorithm ASM 1
20:59:27:474   1b14   GPU #5: algorithm ASM 1
20:59:27:479   1b14   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
20:59:27:484   1b14   No NVIDIA CUDA GPUs detected.
20:59:27:489   1b14   Total cards: 6
20:59:27:493   1b14   No NVIDIA cards in the list, NVML library will not be used.

Try this:

[1] Run DDU to clean out video drivers. http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
[2] Install latest AMD video drivers. https://support.amd.com/en-us/download
[3] Run pixelpatcher. https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher
[4] Set AMD drivers to "Compute" mode, if available for RX470. https://support.amd.com/en-us/kb-articles/Pages/DH-024.aspx

Hope this helps.

[user0071]

I have had claymore 11.8 with adrenaline 18.5 driver working GREAT. Then, windows accidentally updated. Now i'm getting the same thing where it stops at

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

and then just sits there until it says miner can't initialize. I've reinstalled  drivers using DDU. turned off windows dfeneder (claymore isn't being shut down, so I don't think that's the problem). In Gpu Z, open CL is indeed not checked, but I thought these graphics cards RX 400 and 500 serious (currently testing on ONLY a single 570 since this is blowing up my brain) used Open GL. I've resintalled windows twice, basically did everything that I've always ever done and had working fine. Now, nothing. Claymore just sits there. What's weird, is when I run the start.bat file as administrator, then I get the "cannot find EthDcrMiner.64" but it starts up and doesn't close when I start it up non-admin so I really don't think that's the problem. Can ANYONE help? this has been like 2 solid days of troubleshooting.

[/quote]

What version of windows do you have now? It sounds like the 1803 problems. Roll back to the previous windows version
[/quote]

I had 1795 or something like that. 1803 indeed screwed me. New windows installs/rollbacks...nothing has helped. I read that registry stuff doesn’t get sorrted out on a windows reset...so I made a totally new USB install and hopefully i get a truly clean version of Windows. Is there a way to force your computer to go back to a build? I’m assuming this new install will be 1803. Windows has worked great for my rig, but I needed an update for a file and the ass updated EVERYTHING. Kaboom, no more mining.

[leonix007]

I have had claymore 11.8 with adrenaline 18.5 driver working GREAT. Then, windows accidentally updated. Now i'm getting the same thing where it stops at

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

and then just sits there until it says miner can't initialize. I've reinstalled  drivers using DDU. turned off windows dfeneder (claymore isn't being shut down, so I don't think that's the problem). In Gpu Z, open CL is indeed not checked, but I thought these graphics cards RX 400 and 500 serious (currently testing on ONLY a single 570 since this is blowing up my brain) used Open GL. I've resintalled windows twice, basically did everything that I've always ever done and had working fine. Now, nothing. Claymore just sits there. What's weird, is when I run the start.bat file as administrator, then I get the "cannot find EthDcrMiner.64" but it starts up and doesn't close when I start it up non-admin so I really don't think that's the problem. Can ANYONE help? this has been like 2 solid days of troubleshooting.



What version of windows do you have now? It sounds like the 1803 problems. Roll back to the previous windows version


I had 1795 or something like that. 1803 indeed screwed me. New windows installs/rollbacks...nothing has helped. I read that registry stuff doesn’t get sorrted out on a windows reset...so I made a totally new USB install and hopefully i get a truly clean version of Windows. Is there a way to force your computer to go back to a build? I’m assuming this new install will be 1803. Windows has worked great for my rig, but I needed an update for a file and the ass updated EVERYTHING. Kaboom, no more mining.

then dont do updates

a lot ways to do it

https://bitcointalk.org/index.php?topic=2878646.0

Win 10 fall creators update has been proven working great

https://bitcointalk.org/index.php?topic=2581954.0

[bogdan_black]

can someone help pls ? i get this error.. i don"t know what to do.. please help me

What are your specs? Windows version?

windows 10,  6 x rx 470, 8 gb

[jeremyismer]

can someone help pls ? i get this error.. i don"t know what to do.. please help me

What are your specs? Windows version?

windows 10,  6 x rx 470, 8 gb

Which version on Win10? You can see in the posts above the trouble 1803 has.

[javilee94]

Hello, I have an issue with my mining rig since epoch 200, I downloaded v11.8 from github since I can't find v11.9 (MEGA never downloads and I can't fond v11.9 for windows on google drive link).

Here is what I did,

I downloaded v11.8 (uploaded 20 days ago, according to GITHUB). Then I copied and pasted my epool from the claymore's older version, same as START MINING bat file.

Once I run bat file, it runs until it says:

"You can use  + and - keys to achieve best ETH speed, see "FINE TUNING" section in read me for details.

After that message, my computer gets HYPER slow, so I take like a minute to close claymore, then I must restart my mining rig.

By the way, I'm new to this forum so I don't know how to post pictures.

Thanks for your help.

Don't use the github version, otherwise in forum have had trouble with it (not sure if it is genuine). 11.9 was a keccak fix, just use 11.7 or 11.8 from the first post links.

So if I download 11.8 or 11.7 and paste my START MINING bat, everything should be fine?

No guarantees, but it would at least rule out the github version problem...

What version windows are you running? Driver version? Bat file config...

Hello, I have Windows 10 pro.

For AMD I have Win10-64 Bit Crimson Relive Beta BlockChain Wordloads. DDU v17.0.7.9. Display Driver.

This is what I have on my BAT file.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal 0xdadadhasdada.Lee/jaxxxx@gmail.com -epsw x -ftime 10 -mode 1 -tt 70 -fanmax 100 -fanmin 70 -cclock 1050 -mclock 1650 -cvddc 1000 -mvddc 1000

First time that I ran claymore, appeared this:

21:37:07:956   1014   Check and remove old log files...
21:37:07:972   1014   args: -epool eth-us-west1.nanopool.org:9999 -ewal 0xf1b0620972ce2609a4659f9d78fef7ea3d1a2a7e.Lee/javilee94@hotmail.com -epsw x -ftime 10 -mode 1 -tt 70 -fanmax 100 -fanmin 70 -cclock 1050 -mclock 1350 -cvddc 1000 -mvddc 1000
21:37:07:972   1014   
21:37:07:972   1014   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
21:37:07:987   1014   º                Claymore's Dual GPU Miner - v11.8               º
21:37:07:987   1014   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
21:37:08:003   1014   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:37:08:018   1014   
21:37:08:018   1014   b591
21:37:08:237   1014   ETH: 5 pools are specified
21:37:08:237   1014   Main Ethereum pool is eth-us-west1.nanopool.org:9999
21:37:09:081   1014   OpenCL platform: NVIDIA CUDA
21:37:09:096   1014   OpenCL platform: AMD Accelerated Parallel Processing
21:37:09:096   1014   OpenCL initializing...

21:37:09:096   1014   AMD Cards available: 2
21:37:09:096   1014   GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
21:37:09:096   1014   GPU #0 recognized as Radeon RX 470/570
21:37:09:112   1014   GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
21:37:09:112   1014   GPU #1 recognized as Radeon RX 470/570
21:37:09:112   1014   POOL/SOLO version
21:37:09:112   1014   Platform: Windows
21:37:09:534   1014   start building OpenCL program for GPU 0...
21:37:10:471   1014   done
21:37:10:706   1014   start building OpenCL program for GPU 1...
21:37:11:081   1014   done
21:37:11:440   1014   GPU #0: algorithm ASM 1
21:37:11:596   1014   GPU #1: algorithm ASM 1
21:37:12:018   1014   CUDA initializing...

21:37:12:018   1014   NVIDIA Cards available: 3
21:37:12:018   1014   CUDA Driver Version/Runtime Version: 9.1/8.0
21:37:12:034   1014   GPU #2: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 1:0:0)
21:37:12:034   1014   GPU #3: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 2:0:0)
21:37:12:034   1014   GPU #4: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 4:0:0)
21:37:12:049   1014   Total cards: 5
21:37:13:284   1014   
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

21:37:14:315   1014   NVML version: 9.391.01
21:37:14:752   1014   gpu 2 nvidia setcoreclock set ok (1508MHz, previous value was 1708MHz)
21:37:14:799   1014   gpu 2 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:846   1014   gpu 3 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:14:924   1014   gpu 3 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:971   1014   gpu 4 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:15:018   1014   gpu 4 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:38:005   e04   
21:37:38:067   1dc8   GPU 0 temp = 36, old fan speed = 0, new fan speed = 70

21:37:38:223   1dc8   GPU 1 temp = 32, old fan speed = 0, new fan speed = 70

21:37:40:708   1dc8   NVML: cannot get fan speed, error 999 (an internal driver error occurred)


Second time that I ran claymore, appeared this:

21:37:08:003   1014   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
21:37:08:018   1014   
21:37:08:018   1014   b591
21:37:08:237   1014   ETH: 5 pools are specified
21:37:08:237   1014   Main Ethereum pool is eth-us-west1.nanopool.org:9999
21:37:09:081   1014   OpenCL platform: NVIDIA CUDA
21:37:09:096   1014   OpenCL platform: AMD Accelerated Parallel Processing
21:37:09:096   1014   OpenCL initializing...

21:37:09:096   1014   AMD Cards available: 2
21:37:09:096   1014   GPU #0: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 3:0:0)
21:37:09:096   1014   GPU #0 recognized as Radeon RX 470/570
21:37:09:112   1014   GPU #1: Ellesmere (Radeon RX 570 Series), 4096 MB available, 32 compute units (pci bus 5:0:0)
21:37:09:112   1014   GPU #1 recognized as Radeon RX 470/570
21:37:09:112   1014   POOL/SOLO version
21:37:09:112   1014   Platform: Windows
21:37:09:534   1014   start building OpenCL program for GPU 0...
21:37:10:471   1014   done
21:37:10:706   1014   start building OpenCL program for GPU 1...
21:37:11:081   1014   done
21:37:11:440   1014   GPU #0: algorithm ASM 1
21:37:11:596   1014   GPU #1: algorithm ASM 1
21:37:12:018   1014   CUDA initializing...

21:37:12:018   1014   NVIDIA Cards available: 3
21:37:12:018   1014   CUDA Driver Version/Runtime Version: 9.1/8.0
21:37:12:034   1014   GPU #2: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 1:0:0)
21:37:12:034   1014   GPU #3: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 2:0:0)
21:37:12:034   1014   GPU #4: GeForce GTX 1060 6GB, 6144 MB available, 10 compute units, capability: 6.1  (pci bus 4:0:0)
21:37:12:049   1014   Total cards: 5
21:37:13:284   1014   

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

21:37:14:315   1014   NVML version: 9.391.01
21:37:14:752   1014   gpu 2 nvidia setcoreclock set ok (1508MHz, previous value was 1708MHz)
21:37:14:799   1014   gpu 2 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:846   1014   gpu 3 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:14:924   1014   gpu 3 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:14:971   1014   gpu 4 nvidia setcoreclock set ok (1559MHz, previous value was 1759MHz)
21:37:15:018   1014   gpu 4 nvidia memclock set ok (3004MHz, previous value was 4004MHz)
21:37:38:005   e04   
21:37:38:067   1dc8   GPU 0 temp = 36, old fan speed = 0, new fan speed = 70

21:37:38:223   1dc8   GPU 1 temp = 32, old fan speed = 0, new fan speed = 70

21:37:40:708   1dc8   NVML: cannot get fan speed, error 999 (an internal driver error occurred)

When the words in RED appeared, my rig got REALLY slow, I had to restart