Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Piskeante]

is it possible to program a timetable in the miner, so that it starts mining only during certain hours? can that be done? if you cannot, well, thats a way to go in developpment. If possitive, can you tell me how??

thanks.

Just schedule batch script to start miner and another script to kill the process.
 

and how can i do that? have no idea.

[1713921484]

1713921484

[1713921484]

1713921484

[Vicks-Berg]

and how can i do that? have no idea.

You should read the Readme!!!.txt
There is -r (Restart miner mode) argument, that you can use to restarting the miner by time or execute another batch file

[Vispilio]

Among all the dual mining candidates alongside ETH, is there anything that continues to be profitable and is ASIC resistant ?

I was under the impression that the vast majority of people are using Claymore to single mine ETH now...

[leonix007]

and how can i do that? have no idea.

You should read the Readme!!!.txt
There is -r (Restart miner mode) argument, that you can use to restarting the miner by time or execute another batch file

Or search a script that could start/stop a certain application

you may now create a certain windows job At task scheduler

Run a script at a given time for the start and stop of app

[scanfornuts.com]

How do I go about hiding my worker name for nanopool using claymore?

[leonix007]

How do I go about hiding my worker name for nanopool using claymore?

what do you mean by hiding?

I really don't get the need to hide, as the worker name use to manage your rigs

anyways, you can just delete YOUR_WORKER_NAME parameter

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL -mode 1

[66tbird]

I'm at a loss for words on this one. How can this happen. I've been mining ETC on a couple rigs using nanopool for weeks. My start file has the ETC info in case of power out and restart. I've even restarted the rig more than once via simple reboot. About a month ago I switched from ETH to ETC so that wallet info is there but my start folder points to the ETC info and like I said I've used that start folder to get the show going many times with overclock profiles etc... Well about three hours ago my ETC monitor falls to zero. I check the rigs and they are happily mining ETH. Checked the event logs on both rigs and neither had rebooted. So I reboot both and I'm back to mining ETC. Is that a big wtf or what?

[scanfornuts.com]

How do I go about hiding my worker name for nanopool using claymore?

what do you mean by hiding?

I really don't get the need to hide, as the worker name use to manage your rigs

anyways, you can just delete YOUR_WORKER_NAME parameter

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL -mode 1

to make it something like this.
https://imgur.com/a/SJis1AR

because if i were to just remove the worker parameter, it will show up as incorrect worker name or x on nanopool

[leonix007]

How do I go about hiding my worker name for nanopool using claymore?

what do you mean by hiding?

I really don't get the need to hide, as the worker name use to manage your rigs

anyways, you can just delete YOUR_WORKER_NAME parameter

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL -mode 1

to make it something like this.
https://imgur.com/a/SJis1AR

because if i were to just remove the worker parameter, it will show up as incorrect worker name or x on nanopool

Honestly I don't get why you want something like that

And Seems to me that the screen cap is using different miner as it doesn't report a worker

** Snip

might be a failover activated?

[tg88]

I'm at a loss for words on this one. How can this happen. I've been mining ETC on a couple rigs using nanopool for weeks. My start file has the ETC info in case of power out and restart. I've even restarted the rig more than once via simple reboot. About a month ago I switched from ETH to ETC so that wallet info is there but my start folder points to the ETC info and like I said I've used that start folder to get the show going many times with overclock profiles etc... Well about three hours ago my ETC monitor falls to zero. I check the rigs and they are happily mining ETH. Checked the event logs on both rigs and neither had rebooted. So I reboot both and I'm back to mining ETC. Is that a big wtf or what?

Check the epools.txt file.

[Raja_MBZ]

Among all the dual mining candidates alongside ETH, is there anything that continues to be profitable and is ASIC resistant ?

I was under the impression that the vast majority of people are using Claymore to single mine ETH now...

I switched to solo mining as well. Nothing's worth it to dual-mine. Previously, I was dual-mining Ethash + Keccak (XDNA) but recently XDNA changed its algorithm to (custom-made) "HEX", which can't be dual-mined.

I'm going to stick to solo-mining for now; IMO, you should do the same.

[Mannyx101]

Hello. I am trying to set up a miner as a work project. The main goal isnt to make money, its just to say that I know how to set up a miner. The work computer has a radeon rx 560 2gb card. I was wondering if the program would let me run the miner with this card. Thanks.

[Raja_MBZ]

Hello. I am trying to set up a miner as a work project. The main goal isnt to make money, its just to say that I know how to set up a miner. The work computer has a radeon rx 560 2gb card. I was wondering if the program would let me run the miner with this card. Thanks.

Hello! Yes, it should work. Give it a try.

[Privatoria]

As I read in the news, there will be new update of Ethereum in few months related to Constantinople hard fork. Dear Claymore! I think that you have to update your program to be ready for it.

[Call_Me_Bambi]

Hello. I am trying to set up a miner as a work project. The main goal isnt to make money, its just to say that I know how to set up a miner. The work computer has a radeon rx 560 2gb card. I was wondering if the program would let me run the miner with this card. Thanks.

This will show you what you can mine with a 2GB card "Current DAG Size" is what you want to look at.
https://investoon.com/tools/dag_size

[chinh.daongoc]

Hello Claymore

Could you add switch pool function to Remote Manager? I think it should be very useful

Thank you

[Ursul0]

@Claymore
It seems there's a correlation between using temps/fan control from the miner and "NVML: cannot get fan speed, error 999 (an internal driver error occurred)" errors, causing application restart (worker restart in my case)
The rig is Win10 with 10*1060*6gb and and latest drivers. I'm using -mclock and -pwlim with no issues running v11.9, but as soon as I set -tt into anything it will lead to the error above within minutes.

[AzzAz]

@Claymore
It seems there's a correlation between using temps/fan control from the miner and "NVML: cannot get fan speed, error 999 (an internal driver error occurred)" errors, causing application restart (worker restart in my case)
The rig is Win10 with 10*1060*6gb and and latest drivers. I'm using -mclock and -pwlim with no issues running v11.9, but as soon as I set -tt into anything it will lead to the error above within minutes.

I have better results with MSI AB than Claymore on Nvidia

[XiXiMios]

If you could create something that can push the data from the rigs to your server and then to the app on my iPhone, that would be awesome.  Realtime stats on all rigs.  Click on a rig name to get detailed stats on that particular machine.  Group/individual config for pools. etc etc.

[javilee94]

Hello guys,

Today I started having problems with my mining rig.

This is the problem I'm encountering

Once Claymore starts, after few minutes, this message appears:

WATCHDOG: GPU 1 hang in OpenCL call, exit
WATCHDOG: GPU 1 hang in OpenCL call, exit

Quit, please wait..

Restarting OK, exit...

Then my rig freezes..

I would appreciate some help.

Thanks