Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Lunga Chung]

Getting 32+ on all my RX584 nitro+ which is little less then 5% (samsung and hynix) with just -rxboost and existing straps and OC

Well done sir !

[1714054897]

1714054897

[1714054897]

1714054897

[1714054897]

1714054897

[1714054897]

1714054897

[dtodor]

Getting 32+ on all my RX584 nitro+ which is little less then 5% (samsung and hynix) with just -rxboost and existing straps and OC

Well done sir !

Hi, settings for this 32+....

[thereal_kirilvvbg]

Guys,

Can you help me?

"Driver is not installed! Trying to install it...
The boot configuration data store could not be opened.
Access is denied.
Failed, you must run miner with admin rights."

Miner still works, but I cannot see any change in hashrates.

[fluxy12]

Guys,

Can you help me?

"Driver is not installed! Trying to install it...
The boot configuration data store could not be opened.
Access is denied.
Failed, you must run miner with admin rights."

Miner still works, but I cannot see any change in hashrates.

Right click on EthDcrMiner64/properties/compatibility/tick "launch with admin rights"/apply

you're done

[Lunga Chung]

Getting 32+ on all my RX584 nitro+ which is little less then 5% (samsung and hynix) with just -rxboost and existing straps and OC

Well done sir !

Hi, settings for this 32+....

Hynix: Core 1165, Mem 2125~30 all on 837mV
Samsung: Core Core 1165, Mem 2140~45 all on 837mV

Just test on regular PBE straps with -rxboost 1 also gives 32+

[fluxy12]

Guys,

Can you help me?

"Driver is not installed! Trying to install it...
The boot configuration data store could not be opened.
Access is denied.
Failed, you must run miner with admin rights."

Miner still works, but I cannot see any change in hashrates.

Right click on EthDcrMiner64/properties/compatibility/tick "launch with admin rights"/apply

you're done

Also you must put this on your config "-driver install"

[UnclWish]

Good! With 14.5b version and -rxboost option gives on 1 card +1,5% and on 2nd card +3,5%. Finally Claymore's miner became faster Phoenix with double kernels. Using my straps on RX 580 8G hynix MJR.
Excellent work!

It's need to find new best -dcri value or it stays the same as on 12.0 version?
EDIT: New -dcri values increased a bit speed!

[Rasty]

Right click on EthDcrMiner64/properties/compatibility/tick "launch with admin rights"/apply

you're done

Thanks you a lot!

i have ~54-55 mh with -strap 4. with other straps PC are died and restarting.

With 1080Ti needs to use EthPill? or without it?

[VasilyS]

тoлькo для windows 10, вepнo???

Ha win7 и 8 paбoтaeт пpeкpacнo. Test of Claymore 14 in Russian language is in this article: https://www.cryptoprofi.info/?p=2956. Miner is working perfectly, but to acheive stability I'm using option -sintensity 10.

[evlo]

Ah, nvidia straps are gonna really be fun
I dunno why my gpu2 can't take any OC now, same memory as all the others, but that card always took less OC IIRC
Seems like I will need to do same card GUID to OC to Strap tool

[thereal_kirilvvbg]

Guys,

Can you help me?

"Driver is not installed! Trying to install it...
The boot configuration data store could not be opened.
Access is denied.
Failed, you must run miner with admin rights."

Miner still works, but I cannot see any change in hashrates.

Right click on EthDcrMiner64/properties/compatibility/tick "launch with admin rights"/apply

you're done

Also you must put this on your config "-driver install"

Thanks Fluxy12,

It worked - and after restart driver is already install, so I had to remove "-drive install".

[Lunga Chung]

Consumption looks just a little bit higher, but overall good gain

[mu_enrico]

Tried v14.5 and "-rxboost 1" gave me improved hashrate.
Both my RX550 and RX560 stable with the following settings:
- cvddc/mvddc: 850/850
- cclock/mclock: 1100/1900
- strap: 2
- rxboost: 1

Hash ~13.4 Mh/s
I'm satisfied with the power consumption/performance so far, so I'm going to leave my PC mine ETH while idle

[dagarair]

Good! With 14.5b version and -rxboost option gives on 1 card +1,5% and on 2nd card +3,5%. Finally Claymore's miner became faster Phoenix with double kernels. Using my straps on RX 580 8G hynix MJR.
Excellent work!

It's need to find new best -dcri value or it stays the same as on 12.0 version?
EDIT: New -dcri values increased a bit speed!

I hope Claymore took care of Eliovp because without his selflessness this would of never came to be.  Just sayin!

[evlo]

I wonder if it is possible to destroy card using strap. 2 of my nvidias now crash even without straps, while before they worked for months with no issue ...

[encycrypto]

Tried v14.5 and "-rxboost 1" gave me improved hashrate.
Both my RX550 and RX560 stable with the following settings:
- cvddc/mvddc: 850/850
- cclock/mclock: 1100/1900
- strap: 2
- rxboost: 1

Hash ~13.4 Mh/s
I'm satisfied with the power consumption/performance so far, so I'm going to leave my PC mine ETH while idle

Have you recorded the power consumption of the card while it's mining? 13 Mh/s is not a good amount of hash, specially if you've to pay more in electric bill than earning of Ethereum!

I'm planning to get more of those tiny cards if they consume less power.

[rednoW]

latest nvidia kernel boost (not straps but kernel!) made it on par with phoenix.
Now we need the same for polaris. Phoenix has faster kernel 1 and kernel 3, and the speed now is the same due to straps in Claymore's
If you (some way) bring those straps to phoenix it will be even faster.
For example, rx570 8gb micron 1220/2250@855mv (83watt gpu-z) is capable of 34.4mhs with such combination.

[tale01]

Hi Dev,
 When fijiboost ?   it mean R9 Fury HBM RAM (only one memory type: Hynix)

[taras700]

in version 12.0 my rx 580 8gb asus cards work stably at 1150/2200 and give out 30.5 mh in this version in the same way. but when I put the strap function then the farm just hangs. tell me what values are better to put on my cards? The cards have the original BIOS
-----------------------------------------------------------------------------------------------------------
в вepcии 12.0 мoи кapты rx 580 8gb asus paбoтaют cтaбильнo пpи 1150/2200 и выдaют 30.5 mh в этoй вepcии тoчнo тaк жe. нo кoгдa я cтaвлю фyнкцию strap тo фepмa пpocтo зaвиcaeт. пoдcкaжитe кaкиe знaчeния лyчшe cтaвить нa мoиx кapтax? B кapтax y мeня opигинaльный биoc

[mu_enrico]

Have you recorded the power consumption of the card while it's mining? 13 Mh/s is not a good amount of hash, specially if you've to pay more in electric bill than earning of Ethereum!
I'm planning to get more of those tiny cards if they consume less power.

So I have 1 RX 560 and 3 RX 550 in my PC, the total hashrate is 53.5Mh/s, and the power is 300W. I'm just a casual miner who casually mines Ethash coins (including shitcoins). My PC was rarely off anyway, so profitability is not the most important thing for me at the moment.

However, who knows if my favorite shitcoins will moon and make this activity suddenly worth it