ArmenianCracker
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 12, 2019, 03:34:39 PM |
|
Hi there, i woud like to know did the author of this program planing to add optimized timings for AMD Radeon VII, if yes then when approximatly???Thanks
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
Xazax310
Member
Offline
Activity: 246
Merit: 24
|
|
June 12, 2019, 04:59:38 PM |
|
Hello! I have 2 video cards r9 290x in the spring of 2018, Hasrat on etherium falls. Previously, cards were given 28 MH, now only 20. Is there a solution for this problem for windows? Perhaps Mr. Claymore will make a miner with a built-in dag fix for old r9 cards?
Unfortunately, there is no solution for this, AMD would have to release driver fixes on there side for DAG files like they did for the RX400/500 series in 2017.
|
|
|
|
molivil
Member
Offline
Activity: 72
Merit: 11
|
|
June 12, 2019, 07:17:07 PM |
|
Hi there, i woud like to know did the author of this program planing to add optimized timings for AMD Radeon VII, if yes then when approximatly???Thanks
I could be woefully wrong about this, but I thought Radeon VII was core limited not memory limited. If this is the case, optimized memory timings won't help.
|
|
|
|
WhackOBill
Jr. Member
Offline
Activity: 73
Merit: 3
|
|
June 12, 2019, 07:25:54 PM |
|
Hi there, i woud like to know did the author of this program planing to add optimized timings for AMD Radeon VII, if yes then when approximatly???Thanks
I could be woefully wrong about this, but I thought Radeon VII was core limited not memory limited. If this is the case, optimized memory timings won't help. I thought Radeon VII's were already getting 90MH/s with just a refresh rate tweak. I could also be wrong, but there are a few users over in the AMDTweakTool thread that have them. Check there.
|
|
|
|
ivanpop
Newbie
Offline
Activity: 62
Merit: 0
|
|
June 12, 2019, 07:35:13 PM |
|
I have 6 1070's on a rig with h81 pro btc and g1820. After 15-30min the cpu goes to 100% and the rig becomes unresponsive. Some of the cards start mining with 4-5mh and I start to get rejected shares. I'm using MSI AB to overclock my cards. Task manager reports System, System interrupts, EthDcrMiner64.exe or MSI AB maxing out the cpu.
A few people have been having similar issues - myself included. Haven't managed to find a solution yet. It might be hardware related, like insufficient ram for that many GPU's to maintain being run at max capacity from straps? Only speculating. In short though, I'm in the same position as you and if I find a solution I'll post here or PM you. Tried it on a different Win10 installation and it's the same. Now I removed AB and I'm using the built-in -mclock and -powlim commands. I think there is an improvement, as it takes more time before this thing happens. It's not the virtual memory, because hwinfo reports no more than 50-60% use. It's not the Defender, because it's disabled. I tried HiveOS, but I saw that it doesn't support -strap and I removed it without testing. I can't get even close hash speeds so there is no point of trying in the first place. This happens only on my Nvidia rig where I'm using claymore. I'm using Win10 1709 build 16299.371 with Nvidia 430.86 drivers.
|
|
|
|
molivil
Member
Offline
Activity: 72
Merit: 11
|
|
June 12, 2019, 07:37:33 PM |
|
Hi there, i woud like to know did the author of this program planing to add optimized timings for AMD Radeon VII, if yes then when approximatly???Thanks
I could be woefully wrong about this, but I thought Radeon VII was core limited not memory limited. If this is the case, optimized memory timings won't help. I thought Radeon VII's were already getting 90MH/s with just a refresh rate tweak. I could also be wrong, but there are a few users over in the AMDTweakTool thread that have them. Check there. I'm already getting about 90MH/s with nothing more than AMD Afterburner tweaks.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3710
Merit: 1699
|
|
June 13, 2019, 06:56:10 AM |
|
I have 6 1070's on a rig with h81 pro btc and g1820. After 15-30min the cpu goes to 100% and the rig becomes unresponsive. Some of the cards start mining with 4-5mh and I start to get rejected shares. I'm using MSI AB to overclock my cards. Task manager reports System, System interrupts, EthDcrMiner64.exe or MSI AB maxing out the cpu.
A few people have been having similar issues - myself included. Haven't managed to find a solution yet. It might be hardware related, like insufficient ram for that many GPU's to maintain being run at max capacity from straps? Only speculating. In short though, I'm in the same position as you and if I find a solution I'll post here or PM you. Tried it on a different Win10 installation and it's the same. Now I removed AB and I'm using the built-in -mclock and -powlim commands. I think there is an improvement, as it takes more time before this thing happens. It's not the virtual memory, because hwinfo reports no more than 50-60% use. It's not the Defender, because it's disabled. I tried HiveOS, but I saw that it doesn't support -strap and I removed it without testing. I can't get even close hash speeds so there is no point of trying in the first place. This happens only on my Nvidia rig where I'm using claymore. I'm using Win10 1709 build 16299.371 with Nvidia 430.86 drivers. I have this exact motherboard and exact CPU as you except I had it with AMD gpus instead of Nvidia's. I can almost gaurantee your issue is a Windows 10 update. Even with updates disabled, for some reason they kept installing. What would happen is either the rig would mine slower, speeds would jump up and down, Claymore remote manager would keep losing signal, or the miner would just crash. Doing a cold reboot fixed the issue only to return a day or 2 later. Basically it was the update again trying to install. What I did was just leave the rig for 12 hours, let update install and you should be good for a couple more weeks. Its a very old CPU and not meant for Win10.
|
|
|
|
ivanpop
Newbie
Offline
Activity: 62
Merit: 0
|
|
June 13, 2019, 07:55:53 AM |
|
I've left the rig for more than 12 hours. I don't know how you disabled your updates but I can assure you that mine aren't running. The OS is running for more than a year and the build version is 1 year old, that's when I disabled them. I said that I tried with another drive, with another Win10 installation and it's the same. A reboot doesn't fix the issue for a day or two. This happens 30 to 60 minutes after reboot. The CPU is more than capable to run Win10. My main PC uses an I7-2600k which is 4 years older and it's running Win10 fine. Lots of new notebooks made in the last 1-2 years, which come with the "Win10 Compatible" logo have slower CPU's than this Celeron. The CPU is not the problem.
|
|
|
|
MATHReX
|
|
June 13, 2019, 08:26:34 AM |
|
I've left the rig for more than 12 hours. I don't know how you disabled your updates but I can assure you that mine aren't running. The OS is running for more than a year and the build version is 1 year old, that's when I disabled them. I said that I tried with another drive, with another Win10 installation and it's the same. A reboot doesn't fix the issue for a day or two. This happens 30 to 60 minutes after reboot. The CPU is more than capable to run Win10. My main PC uses an I7-2600k which is 4 years older and it's running Win10 fine. Lots of new notebooks made in the last 1-2 years, which come with the "Win10 Compatible" logo have slower CPU's than this Celeron. The CPU is not the problem.
Okay, I'm going to recommend installing Windows 10 LTSB version without the internet and then disabling all the options related to updates. Then connect and install the latest Nvidia driver manually. At first plug in just one card. If everything goes smooth, then second and go on until all the cards are plugged. It might be a card malfunctioning or OS related issue.
|
|
|
|
KGV
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 13, 2019, 08:46:39 PM Last edit: June 14, 2019, 01:45:11 PM by KGV |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some incorrect shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some incorrect shares, 12 is not. Can you check what is problem and fix it.
|
|
|
|
lipcsey
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 13, 2019, 09:45:39 PM |
|
Anyone experienced a (reference card) 1080 getting wrecked on -strap 2 after a week or so? or any other card for that matter.
Thanks
|
|
|
|
|
Er0l
Newbie
Offline
Activity: 36
Merit: 0
|
|
June 14, 2019, 12:12:48 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2
|
|
|
|
KGV
Newbie
Offline
Activity: 55
Merit: 0
|
|
June 14, 2019, 02:33:01 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks
|
|
|
|
Lunga Chung
Member
Offline
Activity: 277
Merit: 23
|
|
June 14, 2019, 03:09:49 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks mem temp is the issue crank fans up to 80%, this solved for me
|
|
|
|
FFI2013
|
|
June 15, 2019, 11:33:25 AM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks mem temp is the issue crank fans up to 80%, this solved for me The same is happening to me not on every card maybe 2 on each rig, before you cranked it up to 80% where you temps normal I have mine set at 65% just trying to see if maybe raising it would help even though my cards are cool
|
|
|
|
Lunga Chung
Member
Offline
Activity: 277
Merit: 23
|
|
June 15, 2019, 01:44:42 PM |
|
2 Claymore.
When i change to new version 14.6 from version 12, i noticed that i start to get some invalid shares in miner. Not a lot, maybe 5-10 from 24hrs on 7 cards rig. But when you have 20 rigs this is a lot. I do not use any strap option or else. I do not change any overclock settings or else. All is same. I use only -rxboost option. Rigs all 'red'. 14.6 gives some invalid shares, 12 is not. Can you check what is problem and fix it.
I fixxed it giving more core Voltage, i bet you UV is too much. Also try -asm 2 I'm not going to rise voltage. But I will try -esm 2. thanks mem temp is the issue crank fans up to 80%, this solved for me The same is happening to me not on every card maybe 2 on each rig, before you cranked it up to 80% where you temps normal I have mine set at 65% just trying to see if maybe raising it would help even though my cards are cool Mine are around 60~65c but thats just the core, you don't have thermal sensors on memory (which is much hotter). What is your ambient temp ?
|
|
|
|
Dark Oopa
Newbie
Offline
Activity: 83
Merit: 0
|
|
June 15, 2019, 03:29:28 PM |
|
Hello, last week end I updated my rigs from v12.0. I set only rx boost 1, without touching the straps. I don't have share problems but it seems that my hashrate on the pool is lower now while the miner says its higher. I use mining rig rental. Anyone with the problem?
|
|
|
|
darkCryptoMiner
Newbie
Offline
Activity: 30
Merit: 0
|
|
June 15, 2019, 03:34:40 PM |
|
Hello, last week end I updated my rigs from v12.0. I set only rx boost 1, without touching the straps. I don't have share problems but it seems that my hashrate on the pool is lower now while the miner says its higher. I use mining rig rental. Anyone with the problem?
Not too sure this applies to you. I have been having this issue with nanopool in the last 24 hours (tested another miner and seemed to be the same) - about 15-20% lower. Swapped to ethermine as a test and that seems to be better at the moment.
|
|
|
|
ArmenianCracker
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 15, 2019, 04:00:26 PM |
|
Hi there, i woud like to know did the author of this program planing to add optimized timings for AMD Radeon VII, if yes then when approximatly???Thanks
I could be woefully wrong about this, but I thought Radeon VII was core limited not memory limited. If this is the case, optimized memory timings won't help. I thought Radeon VII's were already getting 90MH/s with just a refresh rate tweak. I could also be wrong, but there are a few users over in the AMDTweakTool thread that have them. Check there. I'm already getting about 90MH/s with nothing more than AMD Afterburner tweaks. I am geting 90MH/S +- 1-2MH/S on my Radeon VII too with HBM2 memory from Hynix with 956mv/CLK 1750mhz mem 1200mhz, but i think when -strape function will work on Redeon VII we can get more maybe 95 or 96mh/s on Etherium. [/quote]
|
|
|
|
|