Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[BogdanCo]

Hi Guys,

i know it's semi irrelevant, however, seems new platform of nicehash doesn't support claymore anymore in their miner.

it mines with claymore like before however hashrate and rig doesn't show up in the new platform

any hint on how to fix this problem

thanks for your help in advance

try https://old.nicehash.com/miner/<your BTC address>

[1714008143]

1714008143

[1714008143]

1714008143

[west85]

I downloaded a new miner, I configured the batch file and decided to start it, it gives an error: GpuMiner kx failed- 48, rfhns Sapphires RX570 4gb, the same settings on the old miner work fine, than help solve

[0xcosmos]

I have 2x Radeon VII, what is best method for my dual GPU and is it worth for long term?

worth or profit totally depends on factors that applies to you like electricity prices
gpu tweaking for max hashrate
profiability of the coin

anyway
download the miner
configure it properly
undervolt core and mem using overdriventool
increase mem clock and reduce core clock
get the sweet spots for the gpu
and keep on hashing

[VII7]

I have 2x Radeon VII, what is best method for my dual GPU and is it worth for long term?

worth or profit totally depends on factors that applies to you like electricity prices
gpu tweaking for max hashrate
profiability of the coin

anyway
download the miner
configure it properly
undervolt core and mem using overdriventool
increase mem clock and reduce core clock
get the sweet spots for the gpu
and keep on hashing

Thanks

[dvz35]

Mining on Phoenix Miner and Wildrig-multi using the manner of Claymore cards AMD
Run the Claymore with slings and press "0", after disabling mining, do not close the Claymore and run another miner and start mining, the cards will be with the timings from the Claymore, but work on another miner.
video https://www.youtube.com/watch?v=Z6PoUPXUJP8&t=1s

[badworm]

Hi! is there any other ways to download claymore 14.7, the file doesent get through my virus/browsers no matter what i do! ive closed down antivirus, ive changed browser etc... 

Maybe you can create a "folder exception" in your security software and download the file into this folder.

[badworm]

The miner report the error bellow and "stratum/pool" consider I am not sharing solution anymore (it does no profit at all) :

GPU #(one gpu number) got incorrect share. If you see this warning often, make sure you did not overclock it too much!

It already happened with Nvidia and AMD GPUs yet. My setups use factory timings. I do not overclock because it does more power consumption than efficiency.

Then It looks like that "this overclocked loop" can be done by default. So I wonder if that is for penalty or something else ?

Edit : little mistake - It looks only AMD GPUs got that.

[NefariousFool]

Mining on Phoenix Miner and Wildrig-multi using the manner of Claymore cards AMD
Run the Claymore with slings and press "0", after disabling mining, do not close the Claymore and run another miner and start mining, the cards will be with the timings from the Claymore, but work on another miner.
video https://www.youtube.com/watch?v=Z6PoUPXUJP8&t=1s

Hmm... RedPanda and I have been discussing this in our channels since 14.2.

Last week Red Panda Mining literally just  made a video on this.
https://www.youtube.com/watch?v=XPyXN4fnH9s

Notice its dated August 4th.

::shakes head:: OI.. vay.

@claymore
Man i can't wait for you to update something on the XT. It works pretty decently on wildrig i really want to get it on Eth!!

On the edge of our seats man!

[Claymore]

@claymore
Man i can't wait for you to update something on the XT.
On the edge of our seats man!

New version with Navi cards support is ready, I will release it when AMD releases DAG-fix drivers, it will be soon.

[bategojko74]

Mining on Phoenix Miner and Wildrig-multi using the manner of Claymore cards AMD
Run the Claymore with slings and press "0", after disabling mining, do not close the Claymore and run another miner and start mining, the cards will be with the timings from the Claymore, but work on another miner.
video https://www.youtube.com/watch?v=Z6PoUPXUJP8&t=1s

Hmm... RedPanda and I have been discussing this in our channels since 14.2.

Last week Red Panda Mining literally just  made a video on this.
https://www.youtube.com/watch?v=XPyXN4fnH9s

Notice its dated August 4th.

::shakes head:: OI.. vay.

@claymore
Man i can't wait for you to update something on the XT. It works pretty decently on wildrig i really want to get it on Eth!!

On the edge of our seats man!

This is not phoenixminer's thread. Here is Claymore's thread.

[NefariousFool]

[/quote]
This is not phoenixminer's thread. Here is Claymore's thread.
[/quote]

again its not just phoenix miner its any miner you can run with the Claymore straps running. Regardless of that, I don't mine with phoenix i use strictly Claymore for my ETH mining. Thus my anxiousness about him releasing stuff on the XT I want to share experiences work on getting better and better settings with the Claymore Miner.

[rednoW]

@claymore
Man i can't wait for you to update something on the XT.
On the edge of our seats man!

New version with Navi cards support is ready, I will release it when AMD releases DAG-fix drivers, it will be soon.

Don’t you know are they going to release driver with Radeon 7 over 8gb slow memory access fix? It will help a lot fir some memory-heavy algos.

[Biterion]

@Claymore

need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards

thanks

[prostor]

need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks

this is not a solvable problem for eth/etc.
you must mining altcoin with low dag-epoh - Expanse(EXP), Ubiq(UBQ), Dubaicoin(DBIX), ect.
old card 39x and 79xx decrise speed with each epoh low and low.

[abg00]

@Claymore

need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards

thanks

test strap and rxboost options
your card rate 30+ but 300+watt per card.....

[lncm]

@claymore
Man i can't wait for you to update something on the XT.
On the edge of our seats man!

New version with Navi cards support is ready, I will release it when AMD releases DAG-fix drivers, it will be soon.

Great. Any info on the expected hashrate with XT? Thanks.

[ahsbqt]

need help please,
can you tell me about the best setting strap for R9 390 (not 390X) 8Gb memory
i used 14.7 but only get 19.9 Mh/s for all my cards
thanks

this is not a solvable problem for eth/etc.
you must mining altcoin with low dag-epoh - Expanse(EXP), Ubiq(UBQ), Dubaicoin(DBIX), ect.
old card 39x and 79xx decrise speed with each epoh low and low.

The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os

[prostor]

The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os

give us  a screenshot for r9 390 in ETC/ETH with 30M/h

[adaseb]

The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os

give us  a screenshot for r9 390 in ETC/ETH with 30M/h

He is actually correct, and I didn't know it either but apparently with the R9 290/390 you can mine at 30MH/s again if you do it with certain drivers, OS, and mining software.

I had a similiar issue where I used to mine 30MH/s with my R9 290 since 2016 and in 2018 it started to slow down to like 20MH/s before I shut it off. I assumed it was some DAG thrashing bug and just unplugged it.

However there is another thread going on in this category of mining where people were able to mine with their Hawaii GPUs again at 30MHs. However you can't do it on Windows. So search the forums if you need instructions on how to do it.

But keep in mind the GPU will use at least 200 Watts of power.

[ahsbqt]

The problem is amd driver, you can mine a 30mhs in linux with claymore 14.7 and hive os

give us  a screenshot for r9 390 in ETC/ETH with 30M/h

http://prntscr.com/orllyp