Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[reb0rn21]

@Claymore's Dual GPU Miner - v14.6

You know you need latest v15.0 for 5700 card?

[1713853209]

1713853209

[1713853209]

1713853209

[1713853209]

1713853209

[1713853209]

1713853209

[KartingProfi]

I agree , but Claymore is dual-miner, and CPU could be mined as second coin?
BR
G.

No, go to cryptoschool.

[big_daddy]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

Can't run Claymore on RX5700 with 19.9.1 driver. Please HELP. My Log is below:

23:43:55:209   2b80   Check and remove old log files...
23:43:55:212   2b80   args: -epool ssl://eu1.ethermine.org:5555 -ewal 0x0............................................................. -di 0 -tt 60 -mode 1
23:43:55:212   2b80   
23:43:55:213   2b80   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
23:43:55:214   2b80   º                Claymore's Dual GPU Miner - v14.6               º
23:43:55:215   2b80   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
23:43:55:215   2b80   º                       Supercharged Edition                     º
23:43:55:216   2b80   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
23:43:55:217   2b80   

[...]

the answer is in your Claymore's miner version
You are using an outdated version, download the last (v15.0) and you will solve your problem

[bategojko74]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

I've got 52.5 MH/s with -tt 54 -cclock 1300 -mclock 930 -cvddc 750          on 5700 XT. You can lower -tt if it crashes for you until it stop crashes.

[kadot]

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 10.1/8.0
GPU #0: Tesla V100-PCIE-16GB, 16130 MB available, 80 compute units, capability: 7.0  (pci bus 175:0:0)
Total cards: 1
ETH: Stratum - connecting to 'eth-us-east1.nanopool.org' <142.44.243.6> port 9999 (unsecure)
ETH: Stratum - Connected (eth-us-east1.nanopool.org:9999) (unsecure)
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled

ETH: Authorized
Setting DAG epoch #283(3.21GB)...
ETH: 09/06/19-21:41:38 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
Setting DAG epoch #283 for GPU0
Create GPU buffer for GPU0
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 0 failed

Any tips, to make claymore work with Tesla v100 on ubuntu?

[KartingProfi]

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 10.1/8.0

Any tips, to make claymore work with Tesla v100 on ubuntu?

At Windows not working with CUDA 10.1 too (GTX1070).

[ajolly87]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

[0xcosmos]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

what is the power consumption per card from the wall?
i sold my 6x 1060 gpu which hardly did 95 to 100 mh/s
they were all hynix memory cards
looking to get rx5700xt if they are stable at 55 to 60 mh/s without consuming more power

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

what is the power consumption per card from the wall?
i sold my 6x 1060 gpu which hardly did 95 to 100 mh/s
they were all hynix memory cards
looking to get rx5700xt if they are stable at 55 to 60 mh/s without consuming more power

You'll probably expect about 150w per card if you want to overclock it that high (assuming you could). Shouldn't be anymore than that. Currently, I have yet to see any setting that will accomplish 55+ MH/s... yet.
Wattman says that I'm getting about 101w for each card.

[bategojko74]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

[WARMANGALAXY]

DON,T WORK 1660Ti

[bategojko74]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

Try -mclock 750 from command line.It should work.

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

Try -mclock 750 from command line.It should work.

You mean -cvddc 750, right?
Yeah I've tried. Freezes everything up.
Maybe some cards have different memory types like Hynix, Micron, Samsung, etc and that mas something to do with it.
I'm using three XFX RX 5700 XT models.

[bategojko74]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

Try -mclock 750 from command line.It should work.

You mean -cvddc 750, right?
Yeah I've tried. Freezes everything up.
Maybe some cards have different memory types like Hynix, Micron, Samsung, etc and that mas something to do with it.
I'm using three XFX RX 5700 XT models.

-cvvdc is the voltage of cores. It has nothing to do with memory. Did you tried ... -tt 53 -cvddc 750...?

[kadot]

How can i resolve the following error on tesla v100?

GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

Try -mclock 750 from command line.It should work.

You mean -cvddc 750, right?
Yeah I've tried. Freezes everything up.
Maybe some cards have different memory types like Hynix, Micron, Samsung, etc and that mas something to do with it.
I'm using three XFX RX 5700 XT models.

-cvvdc is the voltage of cores. It has nothing to do with memory. Did you tried ... -tt 53 -cvddc 750...?

I have tried -tt 80 -cvddc 750 and it locks up.
-tt 80 -cvddc 800 -powlim -25 works.
I've also tried -tt 80 -cvddc 750 -powlim -25 and it freezes too.
Only stable if I use -cvddc 800 for some reason.
And I can't do -mclock 910 only -mclock 900

So my command is currently
-tt 80 -cvddc 800 -mclock 900 -powlim -25 -fanmin 0

I have this three card rig in a tent with two other machines. The ambient temperature is 110F. I have an 8" blower pushing air from outside directly onto the three cards but the temps are still ~80C.

EDIT:
I think I'm getting close.
My machine has been running for about 7 minutes with this: -tt 75 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 900
But if I do -tt 75 -cvddc 750 -cclock 1300 -fanmin 0 -mclock 905 one of my cards drops to 0MH/s after about 5 minutes.

And... it crashed at after about 30 minutes.

[davidsheng]

Hi everyone. I need some help regarding mining with P106.

Rig specs:
- 7x Zotac P106, total sightly below 170 Mh/s
- Windows 7 64-bit
- nVidia driver version 382.53
- Claymore miner version 11.0 (any version newer than this will always crash for me!)
- MSI Afterburner version 4.4.2
- Virtual memory sufficiently high

Current situation:
- Been running this setup for past ~2 years with very few issues
- I've paid thousands of USD in fees to Claymore since the beginning
- Happy with performance, consistency and stability
- It's working fine right now

Problem:
- I am being forced to abandon v11.0 and install v15.0 once DAG #299 comes out
- I have tested the newer clients including v15.0, but they always crash to desktop immediately after detecting the GPUs
- This doesn't happen with v10 or v11
- Updating nVidia drivers to latest version / CUDA version makes no difference
- Phoenix miner is even worse for me (individual GPUs crash very frequently)

Anyone with similar experience / solution? Your comments will be hugely appreciated. Thanks!

[Dr_Victor]

Hi everyone. I need some help regarding mining with P106.

Rig specs:
- 7x Zotac P106, total sightly below 170 Mh/s
- Windows 7 64-bit
- nVidia driver version 382.53
- Claymore miner version 11.0 (any version newer than this will always crash for me!)
- MSI Afterburner version 4.4.2
- Virtual memory sufficiently high

Current situation:
- Been running this setup for past ~2 years with very few issues
- I've paid thousands of USD in fees to Claymore since the beginning
- Happy with performance, consistency and stability
- It's working fine right now

Problem:
- I am being forced to abandon v11.0 and install v15.0 once DAG #299 comes out
- I have tested the newer clients including v15.0, but they always crash to desktop immediately after detecting the GPUs
- This doesn't happen with v10 or v11
- Updating nVidia drivers to latest version / CUDA version makes no difference
- Phoenix miner is even worse for me (individual GPUs crash very frequently)

Anyone with similar experience / solution? Your comments will be hugely appreciated. Thanks!

I have used P106 under windows 10 with v15 with no problem (the latest drivers).