Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Bojcha]

main/display gpu need to be 8GB rest can be 4.

[bategojko74]

main/display gpu need to be 8GB rest can be 4.

Interesting.. What about motherboards that have onboard VGA / HDMI? It needs to be disabled and use a GPU with 8GB instead?

No, on board works fine.

[Prom_ZA]

Claymore is dead for mining on 4GB cards. If you don't have 6/8GB cards forget about it until it's updated. Windows 7 is a no go as you'll be stuck in graphics mode as AMD never enabled compute mode for its drivers. Download AMD compute switcher to make it easier enabling compute mode on Windows 10.

Interesting.. What about motherboards that have onboard VGA / HDMI? It needs to be disabled and use a GPU with 8GB instead?

No, on board works fine.

Doesn't work for me. Linux is stuck at the boot screen only displaying a blinking cursor.

[kosaet_]

Hello, from yestarday claymore 15 cant mine devfee , because my cards are 4gb
11:51:03:220   2e0   GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU

Miner restart every 17m, when devfee start. Any idea how to fix this ?

[abarth23]

I had the  same yesterday but the guys here helped me a lot.
What I did to fix this was to get Phoenix Miner 5.1c then I unistalled blockchain drivers (my 570rx 4gb are overclocked) with DDU and installed Win10-64Bit-Radeon-Adrenalin 19.11.3 patched the drivers with atikmdag patcher and at the end changed the GPU workload from graphics to compute after hours  the miracle happened. Hope this will work for you as well. Good luck

[ivvi30]

CUDA error 0 #102 - 46
...
...
What could be the reason?
Driver 442.19
Claymore`s v15.0
GTX 1060 6gb

[hetfieldw]

I had the  same yesterday but the guys here helped me a lot.
What I did to fix this was to get Phoenix Miner 5.1c then I unistalled blockchain drivers (my 570rx 4gb are overclocked) with DDU and installed Win10-64Bit-Radeon-Adrenalin 19.11.3 patched the drivers with atikmdag patcher and at the end changed the GPU workload from graphics to compute after hours  the miracle happened. Hope this will work for you as well. Good luck

Hello I need help please, I have already tried with different drivers and none gives me the option of graphics to compute,
amd version
18.12.1.1 did not work
19.7.5
19.12.2
19.11.3
20.4.2 currently in use

  my system is motherboard tb250-btc
4gb ram
6 rx570 4gb msi gaming

install the PhoenixMiner_5.0e I have a hash of 10mh / s per gpu.
Download [Tool] AMD-Compute-Switcher for switch automatically to compute mode, to switch to compute mode I run it and it doesn't increase speed.

In claymore dual miner it gave me each gpu 29mh / s but it stopped working due to a DAG error!

I don't know what else to do ... Previously, the drivers had the option of workloads, now it doesn't come out in any one, it just went away and that's it

HELP HELP HELP PLEASE
thanks to everyone

[abarth23]

Guys I need your help i need afterburner to work again in order to configure memory and speed fun. It detects the gpu's but you cant move anything
Thanks alot once again

[Bojcha]

Guys I need your help i need afterburner to work again in order to configure memory and speed fun. It detects the gpu's but you cant move anything
Thanks alot once again

and you probably using onboard graphic card.

[abarth23]

nope

[RAKOT]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 60 mh/s

How much benefit on radeon rx series ?

[commandera]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 60 mh/s

More info: https://github.com/ethpillan/PillForETH/releases/tag/1.1.0

How much benefit on radeon rx series ?

a good increase in hashrate on Radeon

Only claymore ? i have using claymore and other software
Also 580 bios modded and have 30 mh/s + will help ?

[Lafu]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 60 mh/s

Code:

More info: https://github.com/ethpillan/PillForETH/releases/tag/1.1.0

Watch out this is a Malware download !

All other that quoted that post should be edit there post so the link is not clickable anymore .

You can read more about that Link and other Users that spamming and posted that link in the past days here on my thread https://bitcointalk.org/index.php?topic=5182222.msg54942970#msg54942970

Will report the post shortly .

Archived post https://archive.fo/wip/aDnOV

[Prom_ZA]

Nanominer was real slow and gave a lot of incorrect and stale shares. Now I've switched to PhoenixMiner and haven't had any problems yet. It's even better than Claymore. Not a single incorrect or stale share in the last hour yet. Now I just need to get the onboard graphics to work on Linux for when I hit the ceiling on the primary card.

[abarth23]

is there any other software to manage settings except afterburner

[alucard20724]

ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA
Support all miners for Wondows (AMD+Nvidia)
Hashrate
1080ti - 55 mh/s
2080ti - 58 mh/s
RX5700 XT - 65 mh/s

More info: https_://github.com/ethpillandev/ETHpillAN/releases/tag/v1.1.0

SCAM

this link has already been reported and removed above.
Now a different account which was silent the last couple of years is trying post it again.

you can find more information about the scam here https://bitcointalk.org/index.php?topic=5182222.msg54942970#msg54942970

[elzium]

What about this? Same pattern.

configured miner https://miningcoin.ru/novyj-majner-ot-klejmora-15-0-dlja-nvidia-and-amd-new-claymores-dual-miner-15-0-for-bla-bla-bla/

[henry293]

not new vertion to fix 4GB gpus?!!!

[sbcandrew]

not new vertion to fix 4GB gpus?!!!

no ((((((((

fix 4gb on phoenixminer up to 374 epoch on windows 10

https://www.youtube.com/watch?v=eUaeCGH5_f0

[Prom_ZA]

Has anybody managed to get integrated graphics to work in Linux? I just get the blank screen with a cursor. Booting with "nomodeset" works but then there's no compute drivers as well. This is only a temporary fix to install/uninstall drivers but there's already the compute drivers installed.