ManDoneKTM
Newbie
Offline
Activity: 150
Merit: 0
|
|
September 27, 2020, 10:32:59 PM |
|
33MH @ 100W in not so great imo. I have 29,7MH @ 76W.
in your dreams you have 76w , google more , and use wattmetter . stop sharing fake and bullsh1t infos here
|
|
|
|
RAKOT
Jr. Member
Offline
Activity: 152
Merit: 8
|
|
September 28, 2020, 12:00:48 PM |
|
I plan to buy a rig with 8x RX 570 4gb.
I read somewhere that it is possible to insert 1x RX 580 8gb as first GPU and that the rig works normally even when the ETH exceeds the 4gb DAG file.
Is it true?
Thanks
Hi. It will continue to work on 8gb card. DAG file >4Gb cant suit into 4Gb GPU. Each GPU have to wokk with its own DAG file fitted in RAM.
|
|
|
|
mtibamahdi
Newbie
Offline
Activity: 6
Merit: 0
|
|
September 28, 2020, 01:46:15 PM Last edit: September 28, 2020, 01:59:29 PM by mtibamahdi |
|
hello, I have 3 gpu the gpu 0 is 8 gb and the two others gpu 1 et gpu 2 they are 4 gb, when claymore create dag is always start with gpu 0 how can I change the order I need the gpu 0 to be the last 1 in dag creation because when she start the first one the two other gpu they stay in 0mh/s https://postimg.cc/JyqZcnP4
|
|
|
|
batsonxl
Member
Offline
Activity: 1201
Merit: 26
|
|
September 28, 2020, 02:21:20 PM Merited by vapourminer (1) |
|
Can anyone help i couldnt find anywhere. making me crazy now.
system is 6 X RX 480 8G sapphire. ram 8g ssd 128g cpu 9100f Z390. virtual memory 64g psu 1200w gold thermaltake
Problem is if i use strap any number 1.2.3.4 windows crashes bluescreen. without strap working no problem. Right now only 1 GPU pluged to x16 slot same thing. strap crashes. damn it if i knew i could keep modded bios with no problems and these strap crap i wouldnt be using. tried new windows installed same thing. driver tried many 20 and 19 versions and blockcain drivers as well same thing. Where is this Claymore is he dead?
Phoenix miner works with no problem but it is giving low hashrate 26Mhz. Claymore with strap 32-33Mhz i was getting. People who says phoenix faster how you get it?
Thanks
|
|
|
|
yoonline
Newbie
Offline
Activity: 51
Merit: 0
|
|
September 28, 2020, 06:34:12 PM |
|
today 4gb card stopped working again, fix?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
September 29, 2020, 05:05:54 AM |
|
today 4gb card stopped working again, fix?
Are you using Windows 10? If setting -eres 0 doesn't work then there isn't much you can do but either upgrade 1 of your GPUs to 8GB and put it in the main slot. Or you can install Linux and use PhoneixMiner and you should be good for maybe up to 2 months or so. I had the same issue as you, and couldn't get Claymore or PhoenixMiner to work under Windows 10. Switched to Linux and PhoenixMiner worked but Claymore still didn't. Was a pain to set up initially due to overclocking and undervolting settings but eventually got everything to work nice and stable.
|
|
|
|
teknikos
Newbie
Offline
Activity: 1
Merit: 0
|
|
September 29, 2020, 08:52:49 AM |
|
windows 10, 8gb rx580 in main slot with 7x4gb rx580, with "eres". Since yesterday the 4gb cards will not mine even though claymore starts and runs with no DAG errors
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
September 29, 2020, 03:24:50 PM |
|
today 4gb card stopped working again, fix?
Are you using Windows 10? If setting -eres 0 doesn't work then there isn't much you can do but either upgrade 1 of your GPUs to 8GB and put it in the main slot. Or you can install Linux and use PhoneixMiner and you should be good for maybe up to 2 months or so. I had the same issue as you, and couldn't get Claymore or PhoenixMiner to work under Windows 10. Switched to Linux and PhoenixMiner worked but Claymore still didn't. Was a pain to set up initially due to overclocking and undervolting settings but eventually got everything to work nice and stable. Or Use TeamRedMiner on Win10
|
|
|
|
adaseb
Legendary
Offline
Activity: 3878
Merit: 1733
|
|
September 29, 2020, 03:38:09 PM |
|
windows 10, 8gb rx580 in main slot with 7x4gb rx580, with "eres". Since yesterday the 4gb cards will not mine even though claymore starts and runs with no DAG errors
If the 8GB in the main slot doesn't work then there is nothing else that will make it work because Windows needs to put a certain amount of cache in the GDDR memory. So it loads the most in the main GPU but it also needs to add some little cache in the 4GB GPUs. If they stopped working also its because the small amount of cache is enough to make it run out of memory. So using another miner under the same OS won't work. I tried all the miner software out there and none of them worked. The easiest way is to just get SMos which is easy to set up and should work right off the bat. Only issue with SMOS is you need ethernet because the wifi won't work. If you need Wifi then you need to install Ubuntu which will make most Wifi adapters work straight out of the box. Either way, even if you do this. You got maybe 1.5-2.0 months of mining left, so if you want to mine long term you need to upgrade your farm to 8GB GPUs.
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
September 29, 2020, 05:29:55 PM |
|
windows 10, 8gb rx580 in main slot with 7x4gb rx580, with "eres". Since yesterday the 4gb cards will not mine even though claymore starts and runs with no DAG errors
If the 8GB in the main slot doesn't work then there is nothing else that will make it work because Windows needs to put a certain amount of cache in the GDDR memory. So it loads the most in the main GPU but it also needs to add some little cache in the 4GB GPUs. If they stopped working also its because the small amount of cache is enough to make it run out of memory. So using another miner under the same OS won't work. I tried all the miner software out there and none of them worked. The easiest way is to just get SMos which is easy to set up and should work right off the bat. Only issue with SMOS is you need ethernet because the wifi won't work. If you need Wifi then you need to install Ubuntu which will make most Wifi adapters work straight out of the box. Either way, even if you do this. You got maybe 1.5-2.0 months of mining left, so if you want to mine long term you need to upgrade your farm to 8GB GPUs. There must be some differences between drivers or miners because i had the same problem with my rig (first card 8gb and others were 4gb models). Only miner i got to work was TRM, CM or PM didn't work. Only problem i have with TRM is that sometimes hashrate drops to 1, usually when epoch changes but it can be fixed by restarting miner. This is not Ad, I just told the way i got it to work and it costs nothing to try...
|
|
|
|
DrG
Legendary
Offline
Activity: 2086
Merit: 1035
|
|
September 29, 2020, 06:24:13 PM |
|
windows 10, 8gb rx580 in main slot with 7x4gb rx580, with "eres". Since yesterday the 4gb cards will not mine even though claymore starts and runs with no DAG errors
If you want to eek out another month or 2 of mining you'll have to switch over to Linux based OS as they have less overhead loaded onto the card's VRAM allowing for a larger DAG to be created. Even then all 4GB cards and ASICs will be kicked off by December. Incidentally, ETC has a slightly larger DAG than ETH and the devs are planning to decrease the DAG to make 3 and 4GB cards viable again for mining so you may want to consider switching to ETC which at this time is actually more profitable than ETH due to the recent 51% attacks and scares.
|
|
|
|
NCarter84
Jr. Member
Offline
Activity: 195
Merit: 4
|
|
September 29, 2020, 08:47:37 PM |
|
All my 4gb cards are running just fine on Team Red Miner They have another 6-7 weeks of life left.
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
September 29, 2020, 11:46:18 PM |
|
today 4gb card stopped working again, fix?
Maybe it is just your virtual memory?
|
|
|
|
forato
|
|
September 30, 2020, 12:24:51 AM |
|
All my 4gb cards are running just fine on Team Red Miner They have another 6-7 weeks of life left. why don't you use phoenixminer?
|
|
|
|
O-YEH
Newbie
Offline
Activity: 3
Merit: 0
|
|
September 30, 2020, 05:16:11 AM |
|
I just face this problem and solved by using Adrenaline 19.4.3 My card is RX570 8G Can anyone help i couldnt find anywhere. making me crazy now.
system is 6 X RX 480 8G sapphire. ram 8g ssd 128g cpu 9100f Z390. virtual memory 64g psu 1200w gold thermaltake
Problem is if i use strap any number 1.2.3.4 windows crashes bluescreen. without strap working no problem. Right now only 1 GPU pluged to x16 slot same thing. strap crashes. damn it if i knew i could keep modded bios with no problems and these strap crap i wouldnt be using. tried new windows installed same thing. driver tried many 20 and 19 versions and blockcain drivers as well same thing. Where is this Claymore is he dead?
Phoenix miner works with no problem but it is giving low hashrate 26Mhz. Claymore with strap 32-33Mhz i was getting. People who says phoenix faster how you get it?
Thanks
|
|
|
|
john1010
|
|
September 30, 2020, 03:31:08 PM |
|
today 4gb card stopped working again, fix?
Maybe it is just your virtual memory? I just tried it now using my 8 rx 570 4gb, but I got some dag creation error, I think this is the end of 4gb, anyway there's ather coin to mine with our 4gb or better to sell it until it has a better price.
|
|
|
|
jpmou
Newbie
Offline
Activity: 3
Merit: 0
|
|
September 30, 2020, 07:15:47 PM |
|
Hi, I have a problem, I have a rig with 5 GPU RX580 8GB - W10 - Claymore 15. With ethereum I have no errors and they are 158MHS total. But with ETC I get error OpenCL - 38 - cannot write buffer for dag. What's going on? Thank you!
|
|
|
|
Ngiakhbi
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 01, 2020, 12:33:39 AM |
|
Hello! Since yesterday my ether rigg (6x AMD RX 580 8gb) has gone down from 174mhz (29mhz per gpu) to 60mhz (10mhz per gpu) .... does anyone know why it may be?
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
October 01, 2020, 01:14:08 PM |
|
Hello! Since yesterday my ether rigg (6x AMD RX 580 8gb) has gone down from 174mhz (29mhz per gpu) to 60mhz (10mhz per gpu) .... does anyone know why it may be? Most likely driver update and cards are no more in compute mode
|
|
|
|
cryptonitro
|
|
October 01, 2020, 01:35:36 PM Last edit: October 01, 2020, 02:05:58 PM by cryptonitro |
|
Hi, I have a problem, I have a rig with 5 GPU RX580 8GB - W10 - Claymore 15. With ethereum I have no errors and they are 158MHS total. But with ETC I get error OpenCL - 38 - cannot write buffer for dag. What's going on? Thank you!
same here with rx480 8gb without reasons ... its ok for ETH but not for ETC
|
The only project make me believe ... Holochain
|
|
|
|