Windows mining monitoring tool - v2-BETA [OPEN BETA]

[densets]

Would love to use this to monitor my rigs, i currently run NemoMulti-algo miner on all of them, it switches between ccminerAlexis78, ccminerTpruvot,ccminerKlaust, and EWBF

How profitable is the miner for a 1080?

[1714158047]

1714158047

[1714158047]

1714158047

[1714158047]

1714158047

[ivo02]

Hello I have two RIGs under local IPs 192.168.0.65 and 192.168.0.66 and I have real IP too.
I configure port forwarding in the router 192.168.0.65:3333 and 192.168.0.66:3334 but the Android app sees only the first rig on 192.168.0.65
How can I see both rigs which are behind one real IP?

[th00ber]

Hello I have two RIGs under local IPs 192.168.0.65 and 192.168.0.66 and I have real IP too.
I configure port forwarding in the router 192.168.0.65:3333 and 192.168.0.66:3334 but the Android app sees only the first rig on 192.168.0.65
How can I see both rigs which are behind one real IP?

What ? I don't have developped android app.
Maybe someone else does, but I don't support it

If your rig is set up properly, you can manage them from the monitorig website

[insider00]

why when i try to download it it's cancel the download and saying contain a virus ?

[th00ber]

why when i try to download it it's cancel the download and saying contain a virus ?

Tht's because it contains some of supported miners.
Download it, then replace the miner you want to use with the latest version

[Juniormkl]

Tht's because it contains some of supported miners.
Download it, then replace the miner you want to use with the latest version

Actually im running 6 instances of the EWBF`s miner at the same time on my rig, because if i run all the 6 gpus at the same instance it just crash after few minutes (Gpux are stopped), so i just found this workaround, but i cant see my hashrates anymore because the miner.log is shuffled now, is there a way to read differents logs and report total hashrate at the same time? Ex: miner.log miner2.log miner3.log? Thanks.

Edit: Forgot my dashboard... http://monitorig.com/#?panel=dashboard&id=0e9bda992e633664385cea09f7f13c9cbe4e8db89ee4d269

[th00ber]

Tht's because it contains some of supported miners.
Download it, then replace the miner you want to use with the latest version

Actually im running 6 instances of the EWBF`s miner at the same time on my rig, because if i run all the 6 gpus at the same instance it just crash after few minutes (Gpux are stopped), so i just found this workaround, but i cant see my hashrates anymore because the miner.log is shuffled now, is there a way to read differents logs and report total hashrate at the same time? Ex: miner.log miner2.log miner3.log? Thanks.

Edit: Forgot my dashboard... http://monitorig.com/#?panel=dashboard&id=0e9bda992e633664385cea09f7f13c9cbe4e8db89ee4d269

No, for now, the script scan the miner folder and only read the last modified log file.
But you can try to run multiple instance of monitorig.
So each miner instance could be considered as a rig.
The main drawback will be that GPU count will be false on the dashboard page.

[Sanalup]

Windows Defender shows a Trojan Win32/Rundas.b Virus inside Monitorig folder... is that a normal behavior?

[th00ber]

Windows Defender shows a Trojan Win32/Rundas.b Virus inside Monitorig folder... is that a normal behavior?

It's because the folder contains mining software (claymore, ewbf etc...)
They are often positive in virus scan.

remove them, scan my tool, it's ok
but then, paste or download the miner again (backup the run.bat, it's needed by the tool)

[jamesmbond]

Need help please.

First miner being monitored just fine.  My second Windows 10 with Claymore worked at first but now keeps showing "offline" even though the 5 GPUs are showing with green check marks and I can reboot, restart using Advanced menu.  So clearly this second rig is somewhat being seen by monitorig web site but hash rate, last checked in not showing.      I've rebooted countless times and once in a while the online and all hashing seems to show up and then I check a hour/two later and constantly showing offline now.

Both my first and second rigs have are running the monitorig app/powershell on same 192.168.1.x network.  Both have exact same claymore miner and I updated this second rig to be "#2" rig with unique name (unique name and rig seem to be showing on monitorig web site, just showing as offline and no hashing showing up.

Any ideas?

[th00ber]

Need help please.

First miner being monitored just fine.  My second Windows 10 with Claymore worked at first but now keeps showing "offline" even though the 5 GPUs are showing with green check marks and I can reboot, restart using Advanced menu.  So clearly this second rig is somewhat being seen by monitorig web site but hash rate, last checked in not showing.      I've rebooted countless times and once in a while the online and all hashing seems to show up and then I check a hour/two later and constantly showing offline now.

Both my first and second rigs have are running the monitorig app/powershell on same 192.168.1.x network.  Both have exact same claymore miner and I updated this second rig to be "#2" rig with unique name (unique name and rig seem to be showing on monitorig web site, just showing as offline and no hashing showing up.

Any ideas?

Wrong clock time set on this rig, so the tool think your last hashrate is too old and display your rig in a "No hashing" status ?

[mr_aleks]

@th00ber
Hello, I have problem, I run the OpenHardwareMonitor from the ohm folder, configured config.jon, run monitorig.exe
Me shows an error. If I don't start it myself, it doesn't start automatically when monitoring is started either
Why OpenHardwareMonitor closes?

[ERROR]  Can't get hardware sensors informations. BE SURE OpenHardwareMonitor IS RUNNING

Look
https://i.imgur.com/gWd7nNE.png
https://i.imgur.com/09uIZEI.png

[jamesmbond]

Need help please.

First miner being monitored just fine.  My second Windows 10 with Claymore worked at first but now keeps showing "offline" even though the 5 GPUs are showing with green check marks and I can reboot, restart using Advanced menu.  So clearly this second rig is somewhat being seen by monitorig web site but hash rate, last checked in not showing.      I've rebooted countless times and once in a while the online and all hashing seems to show up and then I check a hour/two later and constantly showing offline now.

Both my first and second rigs have are running the monitorig app/powershell on same 192.168.1.x network.  Both have exact same claymore miner and I updated this second rig to be "#2" rig with unique name (unique name and rig seem to be showing on monitorig web site, just showing as offline and no hashing showing up.

Any ideas?

Wrong clock time set on this rig, so the tool think your last hashrate is too old and display your rig in a "No hashing" status ?

Thanks, that worked.  For some reason my Windows Time service was broken, wouldn't start, etc.   Fixed that and all good now.

[mr_aleks]

@th00ber
Hello, I have problem, I run the OpenHardwareMonitor from the ohm folder, configured config.jon, run monitorig.exe
Me shows an error. If I don't start it myself, it doesn't start automatically when monitoring is started either
Why OpenHardwareMonitor closes?

[ERROR]  Can't get hardware sensors informations. BE SURE OpenHardwareMonitor IS RUNNING

Look
https://i.imgur.com/gWd7nNE.png
https://i.imgur.com/09uIZEI.png

@th00ber
After a little thought myself, I solved the problem, it turned out the problem was in a long way to the executable file OpenHardwareMonitor.exe, I moved the folder to another location and everything started working as it should. You really did what, I was looking for.
But I had a counter question, maybe in the future it will be possible to make a choice of system sensors, which I can to monitor? For example, I need to monitor rpm the system cooler. This can be done?

[KonfuciousK]

Fantastic tool. Well done! But I am having a small problem, I have two rigs set up working fine, Rig 1 and 2 but on my third rig nothing happens, the command prompt barely starts up before disappearing. Something about "cannot find a specified path". I'm guessing it is because I have the internet from 3 bridged and shared with Rig 1 and then Rig 2 has it's own independent line to the router and both 1 and 3 are trying to use the same port? Is there any way around this? I tried using 8122 in json file but no luck.

[th00ber]

Fantastic tool. Well done! But I am having a small problem, I have two rigs set up working fine, Rig 1 and 2 but on my third rig nothing happens, the command prompt barely starts up before disappearing. Something about "cannot find a specified path". I'm guessing it is because I have the internet from 3 bridged and shared with Rig 1 and then Rig 2 has it's own independent line to the router and both 1 and 3 are trying to use the same port? Is there any way around this? I tried using 8122 in json file but no luck.

check your %appdata% folder and compare "OK" rig with "KO" rig.
If file are missing, try a copy/paste.
And be sure the tool has acces to internet (maybe firewall ?)

[sony87]

Hello Dev,

Can we have some more high overview of the road map for this product. It works nice from what i see. Let me give you my vision how ideal for me software looks like:
1. It has automatic installer that configure everything as much as possible.
2. Scripts locally running to have automation to detect issues with miner and take decisions by themselves.
3. I add all my miners, open the web page on a 52' TV, it refresh everything alone and only if something can not be fixed automatically change machine to red so -> action required for me. Saying that because managing more than 200 machines is timely consuming task and time is money.

Let me know what you think

[th00ber]

Yes, The advanced dashboard could be displaying the rig in "error" first instead of sort by name.
For the check and restart/reboot, I'don't know. A lot of miner include watchdog and restart option.

But it could be interessting to add this directly on the monitorig tool and be able to disable it if not needed

[Sanalup]

What about email alerts, when a rig goes offline? :-)

[jamesmbond]

Excellent job on this app/site.   How exact do I donate to continue my Advanced options?     I see your bitcoin address on your web site but not sure how you might track who is giving / donating....