MinToRRo Bitmain Antminer Firmware S5 / S7- The Flash one!

[fubly]

on SALE now!

Custom Firmware for Bitmain Antminer S5 and S7

S9 (we need the Firmware / Miner at first, then we release the S9 support)

Website: http://www.mintorro.com live system!

German support here: https://bitcointalk.org/index.php?topic=1299240

What is MinToRRo?

MinToRRo is not only a software, it is a firmware release for all Antminer S5 and Antminer S7 for all batches.

_______________________________________________________________________________ ____________________________


Take a look on:
_______________________________________________________________________________ ____________________________
LICENSE:   https://bitcointalk.org/index.php?topic=1512744.msg15218497#msg15218497
There is a free version included (old Menu), if you want only to use the free version? Stay on the old firmware!
All new Zwilla functions you can get with the none free version!

Source Code? No problem! Open your miner (ssh) $ cd / and review what you want!
_______________________________________________________________________________ ____________________________
_______________________________________________________________________________ ____________________________
NEWS

• 02. July 2016  - New StepOne.tar and so on (all portal files are updated)
• 28. June 2016 - Full automatic Relax Mode - Temperatur and Fan Control
• 23. June 2016 - New Update System - Now we never need a restart or reboot to update your miner!
• 21. June 2016 - Test - NiceHash Mode (extra nonce support) is running perfect on

HOW TO INSTALL and USE!?

_______________________________________________________________________________ ____________________________
UPGRADE           https://bitcointalk.org/index.php?topic=1512744.msg15218506#msg15218506
Means upgrading from old Bitmain Antminer Firmware to MinToRRO! (not from SD-Card Zwilla Mod)

Download the file Upgrade from your account on https://www.zwilla.de/de/downloads/custom-firmware-antminer-s7/

_______________________________________________________________________________ ____________________________
UPDATE             https://bitcointalk.org/index.php?topic=1512744.msg15218510#msg15218510
Means updating an existing MinToRRO Firmware! (not from SD-Card Zwilla Mod)

Download the file Update  from your account on https://www.zwilla.de/de/downloads/custom-firmware-antminer-s7/

_______________________________________________________________________________ ____________________________
RECOVERY        https://bitcointalk.org/index.php?topic=1512744.msg15218516#msg15218516

It can recovering all now!
Download the file SD-CARD IMAGE  from your account on https://www.zwilla.de/de/downloads/custom-firmware-antminer-s7/

There are no limitations,

_______________________________________________________________________________ ____________________________
HOW TO USE    https://bitcointalk.org/index.php?topic=1512744.msg15218521#msg15218521

_______________________________________________________________________________ ____________________________
DEMO VIDEOS  https://bitcointalk.org/index.php?topic=1512744.msg15218524#msg15218524

_______________________________________________________________________________ ____________________________
Screen Shots    https://bitcointalk.org/index.php?topic=1512744.msg15218528#msg15218528

_______________________________________________________________________________ ____________________________
Settings Menu  https://bitcointalk.org/index.php?topic=1512744.msg15218533#msg15218533

_______________________________________________________________________________ ____________________________
CONF DIRECT   https://bitcointalk.org/index.php?topic=1512744.msg15218535#msg15218535

_______________________________________________________________________________ ____________________________
NETWORK        https://bitcointalk.org/index.php?topic=1512744.msg15218539#msg15218539

_______________________________________________________________________________ ____________________________
DASBOARD      https://bitcointalk.org/index.php?topic=1512744.msg15218544#msg15218544

_______________________________________________________________________________ ____________________________
Managing        https://bitcointalk.org/index.php?topic=1512744.msg15218551#msg15218551

_______________________________________________________________________________ ____________________________
POOLS                https://bitcointalk.org/index.php?topic=1512744.msg15218556#msg15218556

_______________________________________________________________________________ ____________________________
NICEHASH SUPPORT      https://bitcointalk.org/index.php?topic=1512744.msg15218560#msg15218560
After review and agreement, the Team of NiceHash we will release this firmware for their customers !

(cgminer 4.9.2 --extranonce-subscribe is ready for Bitmain Antminers S5 and S7. It is running now stable since 20th June 09:00 )
(click the link to see how to, please )

_______________________________________________________________________________ ____________________________
FEARTURE LIST  https://bitcointalk.org/index.php?topic=1512744.msg15218564#msg15218564

_______________________________________________________________________________ ____________________________
COMING SOON   https://bitcointalk.org/index.php?topic=1512744.msg15218572#msg15218572

_______________________________________________________________________________ ____________________________
MY BACKUPS      https://bitcointalk.org/index.php?topic=1512744.msg15218576#msg15218576

_______________________________________________________________________________ ____________________________
DEBUG              https://bitcointalk.org/index.php?topic=1512744.msg15218579#msg15218579

_______________________________________________________________________________ ____________________________
CHECK DETAILS https://bitcointalk.org/index.php?topic=1512744.msg15218585#msg15218585

_______________________________________________________________________________ ____________________________
OLD MENU - FREE VERSION https://bitcointalk.org/index.php?topic=1512744.msg15218591#msg15218591

_______________________________________________________________________________ ____________________________
Removing MinToRRo from your Antminer

• click on old Menu
• click on upgrade
• on Menu "Flash new firmware image" choose your original Bitmain Firmware
• enable "keep settings"
• click on "Flash image"
• wait for reboot

_______________________________________________________________________________ ____________________________


_______________________________________________________________________________ ____________________________

[1713539871]

1713539871

[fubly]

on SALE now!

Custom Firmware for Bitmain Antminer S5 and S7

Website: http://www.mintorro.com

More later!

Take a look on:

LICENSE:
There is a free version included (old Menu), if you want only to use the free version? Stay on the old firmware!
All new Zwilla functions you can get with the none free version!

Source Code? No problem! Open your miner (ssh) $ cd / and review what you want!

[fubly]

HOW TO INSTALL?
_______________________________________________________________________________ ____________________________

UPGRADE
Means upgrading from old Bitmain Antminer Firmware to MinToRRO! (not from SD-Card Zwilla Mod)

Download the file Upgrade from your account on https://www.zwilla.de/de/downloads/custom-firmware-antminer-s7/

• Go on the old Firmware to menu -> SYSTEM -> Upgrade
• Click on "Restore backup:"
• Choose now the File: "Mintorro-SetpOne.tar"
• Click on "upload Archive" now
• please wait now for up to 5 minutes
• on first shutdown (about 90 seconds) please close your bowser window or click on an other tab of bitmain old menu
• Note! Your Miner talking now over https to your browser!!!
• Now you can login and setting up what you want!
• Login:  your customer email address  and Password: what you want

You have to "https://your.miner.ip." to login now!

Take a look to this video https://youtu.be/-fPufy8Pf2E how it works live!


NOTE!
If you want to upgrade more than 100 Antminers at once please contact us we will make and send you a personal upgrade script!

[fubly]

on SALE now!


UPDATE - CORE
Means updating an existing MinToRRO Firmware! (not from SD-Card Zwilla Mod)

• Download the file Update  from your account on https://www.zwilla.de/de/downloads/custom-firmware-antminer-s7/
• Click on Miner
• Click on Firmware upgrade
• Upload the file Mintorro-Update-Core.tar
• Click on the button "Run this Action"
• This process is unruinable, on every case (lost network, power off, aso. ) your miner will be up within 3 Minutes and starts mining with YOUR pool datas

UPDATE - APP

• Click on Miner
• Click on Firmware upgrade
• Upload the file Mintorro-Update-APP.tar
• Click on the button "Run this Action"
• No - and never a reboot is needed
• or just click on the Button "Update App"

[fubly]

RECOVERY

It can recovering all now!
Download the file SD-CARD IMAGE  from your account on https://www.zwilla.de/de/downloads/custom-firmware-antminer-s7/

There are no limitations!

Note: This Version is only for recovering, it does not contain the brand new MinToRRo it's really only for recovering!
MinToRRo it self is designed to run perfect with the StepOne.tar for upgrading and Mintorro-Update.tar.

How to RECOVER on Windows Computer

• Download the SD-Image
• Download and install Win32-SD imager https://sourceforge.net/projects/win32diskimager/
• download 7zip (link)on your computer
• right click on this file and select unzip with 7zip from the context menu

• unzip the uSD-Image (password: zwilla)
• Plug your uSD-Card into your Windows computer
• open Win32-Imager
• select the SD-Image
• click on burning
• after complete burning, secure unplug your SD-Card
• switch off the Miner, plug the SD into the Antminer slot
• switch your Miner on
• after reboot click on the button "Old Menu"
• follow now this steps https://bitcointalk.org/index.php?topic=1512744.msg15218506#msg15218506

How to RECOVER on Ubuntu

• Download the SD-Image
• Plug your uSD-Card into your Ubuntu computer
• unzip the uSD-Image (password: zwilla)
• ImageBurner will open automatically after unzipping
• select your SD-Card as destination
• click on burning
• after complete burning, secure unplug your SD-Card
• switch off the Miner, plug the SD into the Antminer slot
• switch your Miner on
• after reboot click on the button "Old Menu"
• follow now this steps https://bitcointalk.org/index.php?topic=1512744.msg15218506#msg15218506

NOTE!

Do not use this Recovery version for Mining![/list]

[fubly]

HOW TO USE

• After upgrading to MinToRRo your Bitmain Antminer is mining directly after reboot with your own old settings
• Changing and playing with the settings you find on Menu ->"Miner" ->My local Miner
• Setup the first time MinToRRo
• Click on Make Mode
• Check your Settings -> Menu -> Miner -> Conf-Direct
• Click on "Start mining Software"
• wait some seconds for respond of the Mining Api
• Check the results on top menu -> Dashboard

Benefits?

• Your miner will deliver nearly 99,8% good and valid shares
• Hardware errors nearly eliminated!
• MinToRRo is ready for halving
• over and under volt

[fubly]

DEMO VIDEOS

[fubly]

Screen Shots

[fubly]

Settings Menu

Menu: -> Dashboard -> Miner -> My local Miner

Here you can setup your miner to run with the settings of your choice


Overview

• NiceHash Mode
• • switch on and off this mode
  • select MinToRRo: 4.9.2 (green), please
  • at the end to activate it click "Make Overkill Mod"

----------------------------------------------------------------------------

• Use backup driver
• • your old driver was stored on the folder /config
  • only use this if your miner really not hashing
  • enable the old on (green)
  • disable the old on (red) = default
  • works with every Make Mod

----------------------------------------------------------------------------

• Miner Type
• • on first time setup let it on S7 until you click on Make a Mod
  • Selection
  • Antminer S7
  • Antminer S5
  • after first time "Make mod" the table for the S5 frequency will appear

----------------------------------------------------------------------------

• MinToRRo: 4.9.2 (green)
• • Green is for:
  • Overkill Mode
  • Nicehash Mode

• MinToRRo: 4.8.0 (red)
• • Red is for:
  • Z-Mod 492
  • Z-Mod 480
  • OLD Mode

----------------------------------------------------------------------------

• Miner Mhz
• • Select the MHz of your choice
  • Warning! Do not use a too high MHz on your miner
  • check the hardware errors
  • play with the timeout
  • Note! After first time click on "Make" buttons you can select other miner types and their MHZ table will appear

----------------------------------------------------------------------------

• TimeOut for Asic
• • Set here the timeout for the miner hash work
  • Default for S5 and S7 = 5 seconds
  • controll the hashing
  • if you got to much hardware errors, go higher

----------------------------------------------------------------------------

• Miner Target Temp
• • The best Temp for S7 = 71C° - smashing
  • just select and forget it

----------------------------------------------------------------------------

• Miner Cut Off Temp
• • Default on S7 is 80C°
  • just select and forget it

----------------------------------------------------------------------------

• Overvolt under Volt
• • It controls the voltage
  • take a look to the dropdown infos
  • all my miners are running with 0600
  • check your saving with an voltmeter and share your results, please
  • I do not know if on 0900 the board will hash faster
  • One thing I know it is possible to run on 0900 (do it on your own risk all above the default setting
  • Default S5 = 0726 please use 0720
  • Default S7 = 0706

----------------------------------------------------------------------------

• Fan Auto Modus
• • Switch it on off
  • the dropdowns will appear
  • select minimum level
  • select maximum level
  • after setting these two values switch it ON or OFF again, please.

----------------------------------------------------------------------------

• Enable Pool Automatic Worker !
• • Switch it on off
  • after switch it ON an other switch will appear (IP or MAC) Worker selection
  • on IP: the IP of this AntMiner will be added
  • on MAC: the MAC-Address of this AntMiner will be added
  • Note! Take a look to the pool providers setup instructions for the worker and add on Worker (next field) an underscore or a dot at the end

----------------------------------------------------------------------------

• Your Pool Settings
• • fill all the fields Pool 1 to Pool 4
  • Address! just copy and paste it
  • without stratum://
  • Worker = Your pool worker
  • Sometimes it is a good idea to setup the ip-address of your pool (prevent DNS problems)
  • Note! Take a look to the pool providers setup instructions for the worker and add on Worker (next field) an underscore or a dot at the end

----------------------------------------------------------------------------

• Your Api Port
• • Default is 4028
  • set and forgett it
  • for security reason you can also choose any other port
  • above 1024 to prevent conficts with other network port, but it depends on your network layout
  • Note! Make sure that no one else can access your miner from outside

----------------------------------------------------------------------------

• Pool fallback
• • Default on cgminer is 120 seconds
  • that means, if your pool is not responding on this time it will be switched to an other one
  • Sometimes it is a good idea to setup the ip-address of your pool (prevent DNS problems)
  • Note! If all your pools are not respondig the miner will stops hashing

----------------------------------------------------------------------------

• Suggest Diff for Pools:
• • Your miner will tell your pool to work on this diff
  • If you set it to low it will result in many (share above) target errors
  • If you set it to high it will result in a low share rate
  • on Kano.is and some other they will respect your suggestion but decrease it automatically to a fair rate
  • Note Warning! An over dimensioned will result in a low share rate vice versa if your miner has good look it will result into best gainings

----------------------------------------------------------------------------

• Your Btc Address:
• • Fill this field with a btc wallet address
  • you need this for solo mining
  • you have to fill this field
  • Note! If your address is wrong your miner are not able to mine on this address, but it depends on the solo-pool-provider or you mint on their pocket

----------------------------------------------------------------------------

• Api Allow Network
• • for setup your AntMiner over api conecction
  • W:0.0
  • Allow API access only to the given list of [G:]IP[/Prefix] addresses[/subnets]
  • e.g. W:192.168.0.1,10.0.0/24
  • take a look to this documentation https://github.com/ckolivas/cgminer/blob/master/API-README
  • Note! If you fill here wrong addresses the hole field is unreadable and every one can access your miner from outside the internet

----------------------------------------------------------------------------

• Maximum Error Rate
• • Setting up this will
  • coloring the dashboard panel from green to red if a problem occurred
  • Note! At the start of the mining software it is sometimes RED colored

----------------------------------------------------------------------------

• Make Mod's
• • This will just make the config! You have to restart the mining by your self
  • The Make a Mod selection depends of your choice
  • on every case it will make a valid cgminer config file which is located on /config/cgminer folder
  • to review the config click on "Check your config here"
  • also you can browse the hole files stored on your miner config: Dashboard > Miner > Check details Menu
  • Note! If you manually edit the file and make a misstake your miner will not start working

----------------------------------------------------------------------------

• License Key:
• • Nothing to do!
  • it will be filled automatically by the system

----------------------------------------------------------------------------

• Upper Buttons
• • Controll your Antminer
  • Reboot: reboots the system
  • Kill mining software: just stops the mining service, but note, that the mining control service will start it within 5 minutes from it self
  • Start mining software: restarts the mining and kills old instances
  • Reset to defaults: Warning! It resets your miner to the time where you upgraded the first time to MinToRRo
  • Start FAN Controll App, it starts and checke the service with the settings you made above!
  • Give him a kick: If you do not want to reboot your miner it will run several scripts to recover your hash boards.
  • Note! On every case your miner will come back! But sometimes it is faster to reboot the hole system

----------------------------------------------------------------------------

• Warning! Read this button
• • please read carefully the hole text
  • if you have any problems please write us an email or a pm here
  • Note! Read and understand the warnings! You can damage your miner with a to high MHZ or wrong Voltage!

[fubly]

CONF DIRECT

http://www.mintorro.com/cgminer-conf.php

Review your settings and save them

• click on > Dashboard > Miner > Cgminer.conf Direct
• new window opens
• review your settings
• make changes direct on the file
• set what ever you want (feel free) no limitations
• click on "save cgminer.conf" (it just save the settings without restart your miner!!!)

Restart Mining Software after review

• click on the button "start mining software" it will restart your mining software with the new settings
• if you are not firm with this settings, please use only the "my local miner" menu
• after clicking on start, you will be redirected to the Dashboard (it will take some seconds)
• if you cant wait, just reload the hole tab over your browser (circle sign)

Give him a Kick

• if your miner stops working and you do not want to reboot the hole miner
• just click on the button "give him a kick"
• now all diagnostics known by MinToRRo will run over and over your miner
• note the website will answer "delayed"
• on every case your miner will start mining by it self
• maximum time (5 minutes)

Kill Mining Software

• by click on this button
• the mining software will be killed and stops working for 5 Minutes
• after this time it starts from it self again!

Reset to your old cgminer config

• by click on this button
• it will delete all your settings
• grabbing your config from your first time upgrade to MinToRRo
• note the miner will start with your old settings after click on "start mining software"
• before "reset to old" please backup your live datas over > Dashboard > Miner > My Backups

[fubly]

NETWORK



http://www.mintorro.com/netzwerk.php

[fubly]

DASHBORAD

[fubly]

Managing

[fubly]

POOLS

try it: Add a Mining Pool

http://www.mintorro.com/index.php

click on the green button to add a miner or add a pool


Adding a Pool

• click on Dashboard
• click on "add a panel" (green folder sign on the right)
• click on "add a pool"
• new panel opens now
• select a pool from the dropdown menu
• fill this form with the details you have from your pool opp
• the field "homepage" can filled with a link of your own choice
• note! Not all fields are required. It depends on your selected pool
• click on the button "save"
• you will be redirected to the Dashboard now
• the first time crawling your pool will take some seconds
• if you want it faster, refresh the page by "reload your browser (circle button) tab"

Pool Overview on Dashboard

• click on "goto" will redirect you to the link "homepage" you filled in the form before
• click on "edit" will open the pool setup form
• click on "up" sign, will hide / show the pool
• click on "X" sign, will delete the pool panel (followed by the question: "sure to delete"
• click on "url" will redirect you to the pools website
• for example "nicehash" here you will be redirected to the stats page of your wallet by clicking on "url"

[fubly]

NICEHASH SUPPORT

Our build is ready, Cgminer 4.9.2 is running stable since 20th June with extra nonce support. One of our Antminer S7 is running on it, check here:

MinToRRo Antminer S7: Details on NiceHash (see details)

check if xnsub enabled ("algo":1)

_______________________________________________________________________________ ____________________________
How to setup MinToRRo with NiceHash xnsub support? - Pool Mining

(stratum+tcp://sha256.eu.nicehash.com:3334) - it depends on your location - see here https://www.nicehash.com/?p=gstarted

• click on menu "Miner"
• click on "My local Miner"
• switch the button "NiceHash Mode" to on (green)
• setup your poolworkers
• click on "Make Overkill Mod"
• click on "Start Mining Software"
• wait for restarting, MinToRRo will you redirect to the overview page (some seconds)

_______________________________________________________________________________ ____________________________
How to setup MinToRRo with NiceHash xnsub support? - Solo Mining

• like above
• use this Address - (stratum.solo.nicehash.com:3334)

_______________________________________________________________________________ ____________________________
How to setup the Worker on NiceHash servers? - manual Worker / automatic Worker

Manual Worker:

• User = your BTC Address.

• Worker= use a dot {.} behind your User/BTC like this: 1QAUCDw2naJzCXrxfKARwDLyMx71qxQneh.Worker1

Automatic Worker:

• you find this function on Menu "my local miner" above the Pools
• click on the switch "Enable Pool Automatic Worker !" (green)
• now you have the choice between "Mac-Address" or "IP-Address"

• Worker= use a dot {.} behind your User/BTC

• check if NiceHash Mode is activated
• click on "Make Overkill Mod"
• click on "Start Mining Software"
• wait for restarting, MinToRRo will you redirect to the overview page (some seconds)

_______________________________________________________________________________ ____________________________

 

[fubly]

FEARTURE LIST

[fubly]

COMING SOON

[fubly]

MY BACKUPS

nothing easier than that

Making Backup

• click on menu ->Miner
• then on menu -> MyBackups
• click on button -> "make a Backup"
• browse the files
• click on a generated backup (download starts)

Delete Backup

• delete backups, just click on button "delete all backups"

Restore Backup

• restore your backup - > click on button "Firmware upgrade"
• choose the file you downloaded
• click on the button "run this action"
• you find it also Menu > Miner > Firmware upgrade > upload > run this action

Find a backup

• click on the sign to find a backup and enter your search string followed by hitting "enter"

[fubly]

DEBUG

this will crawl all your miners and output one time the request of Mining Software api (cgminer-api)

you will get detailed information about the running machines

[fubly]

CHECK DETAILS


by a click on this Menu you will be redirected to a file browser where you can see and check what files are stored inside your config

• click on Dashboard > Miner > Check Details
• you get a full file browser to:
• watch and check the files about your config
• downloading them by click on them
• navigation by click on folders