[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[netzer25]

Hi all,

at first, sorry about my bad english.

My problem is overclocking of a MSI ARMOR RX 570.
This card fall always back to core clock of 976 MHz. Memory always go where i want and at the moment at 2100 MHz.
I tried so much different core clocks and change other values in the overclock menu, but at miner restart the clock i entered will be shortly accepted, but after a few seconds core clock is down to 976 MHz.
I also read out the bios and entered exactly the values i have read in the bios, but always the same, fall back to 976.
In the overclock menu i turned "aggressive undervolting" on and set 1100mV voltage but nothing happens.
This card runs good at 30 mhs on windows with MSI Afterburner, but i had set voltage to 1100mV to get 1150 MHz core clock.
Can anybody help me to get 1150 MHz in SMOS.

Thank you in advance, Netzer25

[tytanick]

New miner versions:
- bminer-v15.5.0 (Improve the performance of the Cuckatoo algorithm. Support dual-mining ETH and VBK)
- nbminer-nebutech-v22.3 (Improve Grin31 performance on 1080ti and 2080ti)

[tytanick]

...
This card runs good at 30 mhs on windows with MSI Afterburner, but i had set voltage to 1100mV to get 1150 MHz core clock.
Can anybody help me to get 1150 MHz in SMOS.
...

You can try setting Powestage to 7
Please write to me at admin@simplemining.net - i will check your settings.
In email tell me what is your simplemining account and rig name - i will check your rig.

[Dean1]

Will the new Nvidia 1660ti be supported anytime soon? I got 1 that i added to my nvidia rig but it wont boot up with the 1660ti in it

[tytanick]

Will the new Nvidia 1660ti be supported anytime soon? I got 1 that i added to my nvidia rig but it wont boot up with the 1660ti in it

Try to download newest image from simplemining.net and reflash drive and change email again.
This might help you.

[Dean1]

Will the new Nvidia 1660ti be supported anytime soon? I got 1 that i added to my nvidia rig but it wont boot up with the 1660ti in it

Try to download newest image from simplemining.net and reflash drive and change email again.
This might help you.

What do you mean by ' change email again'??

[tytanick]

Will the new Nvidia 1660ti be supported anytime soon? I got 1 that i added to my nvidia rig but it wont boot up with the 1660ti in it

Try to download newest image from simplemining.net and reflash drive and change email again.
This might help you.

What do you mean by ' change email again'??

I suppose you have old image with old nvidia driver.
So if you want to use newest image you need to reflash drive and after reflashing you need to change config.txt file and enter your email.
Check if that will help - i mean using newest image.

[tytanick]

New miner versions:
- new miners noncerpro-cuda-v2.0.1 and noncerpro-opencl-v2.0.0 (for mining Nimiq on NVidia and AMD)
- API for both above will be soon

[Dean1]

Will the new Nvidia 1660ti be supported anytime soon? I got 1 that i added to my nvidia rig but it wont boot up with the 1660ti in it

Try to download newest image from simplemining.net and reflash drive and change email again.
This might help you.

What do you mean by ' change email again'??

I suppose you have old image with old nvidia driver.
So if you want to use newest image you need to reflash drive and after reflashing you need to change config.txt file and enter your email.
Check if that will help - i mean using newest image.

I did all that, now i tried with only that one 1660ti in the rig. And i am still getting the same error. Please help

[tytanick]

New miner versions:
- grinpro-v2.1 (Fixed minor bugs. Added swap support on AMD only. Improved stratum stability)
- nanominer-v1.2.1 (Fixed crash on startup on some systems without Nvidia GPUs)

[tytanick]

Update v1219:
- overclocking now support Vega and Radeon VII GPUs (needed reflash with newest beta image with Vega/Radeon VII support)
- fix zero GPUs during rig start with NVidia GPUs
- restore pp_table for AMD rigs with every miner reload also if user clear OC values in dashboard - do not need anymore restart rig for restore default OC

[tytanick]

Vega and Radeon VII support

We are proud to announce that Simplemining.net started supporting Vega and Radeon VII graphics cards.
This is still in beta stage, but first tests passed successfully even with OC and UV support.

To start using Vega/VII GPUs You need to reflash Your pendrive by downloading newest beta image from our download section.

OC and UV is also supported via dashboard in the same way as with RX GPUs, but the "user's powerstage" option is ignored because of autoselect of best powerstage procedure for those cards.

[iscgdave]

Update today seems to have broken something with my RX480 rigs, they keep crashing.

Is there anyway for me to roll back?

Getting AMD ADL Library not found and then a reboot or  I see "Rig is rebooting due to system error. It could be caused by too much overclock/undervolt."

It then restarts and loads fine for a minute and then crashes again

I have 2 rigs doing the same exact thing

[iscgdave]

OK so it is probably operator error but I had to go in re-adjust the overclock settings. Haven't touched that in a very long time.

[BogdanCo]

Vega and Radeon VII support

We are proud to announce that Simplemining.net started supporting Vega and Radeon VII graphics cards.
This is still in beta stage, but first tests passed successfully even with OC and UV support.

To start using Vega/VII GPUs You need to reflash Your pendrive by downloading newest beta image from our download section.

OC and UV is also supported via dashboard in the same way as with RX GPUs, but the "user's powerstage" option is ignored because of autoselect of best powerstage procedure for those cards.

Finally! Thanks!

[dzap]

OK so it is probably operator error but I had to go in re-adjust the overclock settings. Haven't touched that in a very long time.

My hardcoded bios OC no longer work... what happened?

[nmc22]

Vega and Radeon VII support

We are proud to announce that Simplemining.net started supporting Vega and Radeon VII graphics cards.
This is still in beta stage, but first tests passed successfully even with OC and UV support.

To start using Vega/VII GPUs You need to reflash Your pendrive by downloading newest beta image from our download section.

OC and UV is also supported via dashboard in the same way as with RX GPUs, but the "user's powerstage" option is ignored because of autoselect of best powerstage procedure for those cards.

Great job, but not work - teamredminer not worked (do nothing), xmrstack not worked (bootloop). BTW claymore eth worked, but it's no need

[tytanick]

OK so it is probably operator error but I had to go in re-adjust the overclock settings. Haven't touched that in a very long time.

My hardcoded bios OC no longer work... what happened?

Can you both write to me at admin@simplemining.net ?
I will check that but please write me details what rig names have problem and what settings you should have ?

Vega and Radeon VII support

We are proud to announce ....

Great job, but not work - teamredminer not worked (do nothing), xmrstack not worked (bootloop). BTW claymore eth worked, but it's no need

Yeah, not many miner programs support those stupid Vega GPUs

[tytanick]

Update v1221
parser for noncerpro-cuda-v2.0.1 and noncerpro-opencl-v2.0.0
changed update and miner repository from http to https
changed uptime syntax to shorter and simpler: 5d 4h 7m
some other invisible changes for user

[nmc22]

Vega and Radeon VII support

We are proud to announce ....

Great job, but not work - teamredminer not worked (do nothing), xmrstack not worked (bootloop). BTW claymore eth worked, but it's no need

Yeah, not many miner programs support those stupid Vega GPUs

Hmmm... This miner software normal worked on Hive/VegaEdition. All version TRM worked from 0.4 and above with CN/R on Vega similary Win - OC/undervolt/etc