[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[moldov]

Hello

Im using SMOS since a while and im very happy with it.
now i would like to tune it a bit.

my rig:
6x XFX Radeon RX 580 GTS XXX Edition 8GB
bios modded

i get stable 184MH/s mining ETH on Nicehash

OC settings: 1360/2160/840

so far so good, BUT:

Power at the wall: 1150W (with MoBo)
=185W per Card!

How can i lower this?
2x 750W PSU

would the consumption be lower if i buy 1400w PSU? (efficiency)

the other thing:

how can i improve found shares?
it jumps around

every tip would be appreciated

thanks

may the hashes be high and the wattage low...

[Wolverine_Na]

- First of, Rigs' temperature is too high.
You need to do something to reduce them to < 70'C

- If your cards are 8G, memclock 2100 is okay. But if they are 4G, 2100 is too high.
Well, it depends on how you flash your card as well.

- Some rigs restarted but some not, because some cards can do 2100 but some cannot.

- My rigs restart 1 or 2  time per month.

Good luck.

hello everybody, anyone knows why my rigs shut down continuously?

https://ibb.co/ge0p58

I am using SMOS in my rigs. In some cases the rigs shut down up to 50 times in under 24 hours. The motherboard's bios is set up to restart the rig once it looses power to the last state, meaning the rigs loop in a shut down/restart cycle that can go on for a while, sometimes more, sometimes less.

Hardware=

GPU: 6 x "XFX Radeon RX 580 GTS XXX Edition"
CPU: intel i3 8100
Motherboard: "gigabyte Z370 HD"

It worth notice that upon a lot or rigs with the same exact hardware in the same room, as you can see in the picture, the shut-down/restart process occurs from 2 to 48 times in less than a day. From what I know the rigs shouldn't shut down at all in normal condition. So, something is wrong. I don't know which should be the average rate for 24 hours per rig, if any.

I am using claymore-eth-v11.0 whit the following options: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333

Considerations:
1- The temperature could somehow trigger the process. The heat sensor could shut down the machine, the bios reboot the machine, the sensor still over the temperature threshold and shuts down again and so on. Sometimes after the cool down the vicious cycle continues though and sometimes the temperature doesn't justify the process.
2- When I detach all the raiser cables from the motherboard and unplug all the power cables from the PSU to the raisers and to the GPUs, the problem immediately stops and the rig doesn't shut down anymore. But of course, this is not a solution. Anyway this make me think the problem does not rely on the motherboard, CPU or RAM.
3- It could be that the raisers are damaged in some ways that I don't know, but the extent of the problem is so huge that I suppose it just couldn't be the case. Besides, I purchased them from at least 4 different vendors in amazon with good overall reviews.
4- It happens with both NVIDIA and AMD graphic cards.
5- My bios settings:
_Vtd: Disabled
_4g encoding: enabled
_power restore: "memory"
_internal graphic: disabled

the rest is on bios default mode

Questions:
1- What the hell am I doing wrong? I know people here seems to know a lot so help me out brothers!
2- How much is a normal shut down rate per day per rig? 0? 1? 10?

To all the brothers out there, I ask for help

[alizali]

Hello

Im using SMOS since a while and im very happy with it.
now i would like to tune it a bit.

my rig:
6x XFX Radeon RX 580 GTS XXX Edition 8GB
bios modded

i get stable 184MH/s mining ETH on Nicehash

OC settings: 1360/2160/840

so far so good, BUT:

Power at the wall: 1150W (with MoBo)
=185W per Card!

How can i lower this?
2x 750W PSU

would the consumption be lower if i buy 1400w PSU? (efficiency)

the other thing:

how can i improve found shares?
it jumps around

every tip would be appreciated

thanks

may the hashes be high and the wattage low...

why core is 1360   very too much
and try 830 820 mV
this system should draw about 850 watt on the wall

[playfast]

Longtime windows 10 user, decided to give smos a try, I think it was worth the switch, love the remote management and rock solid rig stability.
The only downside is that linux gpu drivers seem inferior to windows, my hashrate went down ~2%, power draw and temps went up slightly. I also had to add a tiny bit more voltage to some of my cards to prevent incorrect shares, windows 10 was more tolerant of aggressive undervolts.

[EGEE]

I got this error message "miner ended/crashed" with Sapphire Nitro+ RX580 8 GB (bios not modded), 9 graphic cards

Motherboard is Asrock H110 pro btc+
4 GB RAM

https://ibb.co/fbfYtT

Here is my config

claymore-eth-v11.8

-wd 1 -r 1 -epool ssl://eu1.ethermine.org:5555 -ewal "my wallet address" -esm 0 -epsw x -mode 1 -platform 2 -ftime 10 -mport 127.0.0.1:3334 -mpsw "password"

Anyone know why this Sapphire rig chrashes at the beginning? My first rig with Nvidia gtx1070 works excelent.

[tytanick]

Update dashboard v3035
- added miner ccminer-tpruvot-v2.2.6-cuda8.0
- added miner xmr-stak-v2.4.5
- you can now ENABLE OhGodAnETHlargementPill in global options in dashboard (will work only on GTX 1080 and 1080TI)
- added decimal xx.x % values in vote poll
- server optimization regarding session/cookies

[tytanick]

It seems I have troubles after the last update, rig starts and after few minutes goes down in the dashboard (SSH doesn't work too, but at the start, it work few minutes).
eth_miner 11.8, 8 x RX 580 4GB
But actually, it seems rig works now, as I see by power consumption. In dashboard it's down.

Dashboard was offline for 2 minutes
I did not received any other negative signals about updates. Accually seems to be fine everything.
So be sure to check your case.
Also the ssh password should be now:
miner / your@email.com
root / miner1324 .  <--- this will be changed to also email very soon.

[gegywko]

It seems I have troubles after the last update, rig starts and after few minutes goes down in the dashboard (SSH doesn't work too, but at the start, it work few minutes).
eth_miner 11.8, 8 x RX 580 4GB
But actually, it seems rig works now, as I see by power consumption. In dashboard it's down.

Dashboard was offline for 2 minutes
I did not received any other negative signals about updates. Accually seems to be fine everything.
So be sure to check your case.
Also the ssh password should be now:
miner / your@email.com
root / miner1324 .  <--- this will be changed to also email very soon.

It looks like a problem with ethernet connection, sorry for bothering you.

[nakan79]

Update dashboard v3035
- you can now ENABLE OhGodAnETHlargementPill in global options in dashboard (will work only on GTX 1080 and 1080TI)

4/4 rigs (which have 1080) failed to start with OhGodAnETHlargementPill. Maybe to much overclocking. Anyway, I think it shouldn`t be Global Option. Better individual for each rig. IMHO 

[tytanick]

Update dashboard v3035
- you can now ENABLE OhGodAnETHlargementPill in global options in dashboard (will work only on GTX 1080 and 1080TI)

4/4 rigs (which have 1080) failed to start with OhGodAnETHlargementPill. Maybe to much overclocking. Anyway, I think it shouldn`t be Global Option. Better individual for each rig. IMHO 

Yes, try lowering OC.
Right now it needs to be as global parameter.
In order to make it more locally i would need more time.

[EGEE]

I got this error message "miner ended/crashed" with Sapphire Nitro+ RX580 8 GB (bios not modded), 9 graphic cards

Motherboard is Asrock H110 pro btc+
4 GB RAM

https://ibb.co/fbfYtT

Here is my config

claymore-eth-v11.8

-wd 1 -r 1 -epool ssl://eu1.ethermine.org:5555 -ewal "my wallet address" -esm 0 -epsw x -mode 1 -platform 2 -ftime 10 -mport 127.0.0.1:3334 -mpsw "password"

Anyone know why this Sapphire rig chrashes at the beginning? My first rig with Nvidia gtx1070 works excelent.

Spesific error message is: /root/xminer.sh: line 101: 5561 Trace/breakpoint trap $MINER_PATH $MINER_OPTION

In windows 10 Sapphire Nitro+ RX580  graphic cards works well..

Can it be USB memory size problem? I have 8 Gb USB.

[Pb67]

Dear friends, from yesterday one of my rig report this error and don't start anymore.
Was overclocked from 8 months in the same way.
I've also try with no overclock (0 in Core and 0 in memory) but error is the same.
Any idea? anybody have experienced with this issue?
Thank you.

http://imgur.com/a/j282cFx

often thats a result of a bad riser or poor seating of the riser/usb

Thank you Klondike, one riser passed to a new life 
Changed and now work flawlessly.

[HaberHash]

hello everybody, anyone knows why my rigs shut down continuously?

https://ibb.co/ge0p58

I am using SMOS in my rigs. In some cases the rigs shut down up to 50 times in under 24 hours. The motherboard's bios is set up to restart the rig once it looses power to the last state, meaning the rigs loop in a shut down/restart cycle that can go on for a while, sometimes more, sometimes less.

Hardware=

GPU: 6 x "XFX Radeon RX 580 GTS XXX Edition"
CPU: intel i3 8100
Motherboard: "gigabyte Z370 HD"

It worth notice that upon a lot or rigs with the same exact hardware in the same room, as you can see in the picture, the shut-down/restart process occurs from 2 to 48 times in less than a day. From what I know the rigs shouldn't shut down at all in normal condition. So, something is wrong. I don't know which should be the average rate for 24 hours per rig, if any.

I am using claymore-eth-v11.0 whit the following options: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333

Considerations:
1- The temperature could somehow trigger the process. The heat sensor could shut down the machine, the bios reboot the machine, the sensor still over the temperature threshold and shuts down again and so on. Sometimes after the cool down the vicious cycle continues though and sometimes the temperature doesn't justify the process.
2- When I detach all the raiser cables from the motherboard and unplug all the power cables from the PSU to the raisers and to the GPUs, the problem immediately stops and the rig doesn't shut down anymore. But of course, this is not a solution. Anyway this make me think the problem does not rely on the motherboard, CPU or RAM.
3- It could be that the raisers are damaged in some ways that I don't know, but the extent of the problem is so huge that I suppose it just couldn't be the case. Besides, I purchased them from at least 4 different vendors in amazon with good overall reviews.
4- It happens with both NVIDIA and AMD graphic cards.
5- My bios settings:
_Vtd: Disabled
_4g encoding: enabled
_power restore: "memory"
_internal graphic: disabled

the rest is on bios default mode

Questions:
1- What the hell am I doing wrong? I know people here seems to know a lot so help me out brothers!
2- How much is a normal shut down rate per day per rig? 0? 1? 10?

To all the brothers out there, I ask for help

If anyone can help I can provide a reward of 0.5 ethereum as long as it is effective. If interested please send me a pvt message

Might also be a psu problem. Seems that as soon as your cards start mining it trips the power and restarts. My rigs only restart when I update the software so in essance once a month at most

- Why do you have internal graphics card disabled?  I use the internal graphics cards to monitor to rig.  I'd enable that.  Don't plug a monitor into your mining cards unless absolutely necessary.
- Did you bios mod your cards?
- I'd pull out all cards except one and start adding once you have 1 card running stable for a few hours.
- Disable any overclocks.  Your overclock could be at fault.

Whatever happened to this thread?  Did .5 ETH get distributed??

[Warlockmng]

How to mine lyra2z algo coins with AMD GPU? Which miner should I use?

Thanks

[moh5311]

How can I turn off auto-updates for my rigs?
I am running rigs in a remote location and we have limited bandwidth.

[citronick]

How to mine lyra2z algo coins with AMD GPU? Which miner should I use?

Thanks

gatelessgate-0.1.3   

--kernel lyra2Z -o stratum+tcp://asia.bsod.pw:1455 -u aJLgdXbQCXRRHz7WqoEqhrhqRLzakgfYPu -p c=XZC --gpu-platform 2 -I 18 --worksize 32 --gpu-fan 80 --temp-target 65 --temp-overheat 80 -T



sgminer-gm-aceneun-x16r-v5.5.5   

--kernel lyra2Z -o stratum+tcp://asia.bsod.pw:1455 -u aJLgdXbQCXRRHz7WqoEqhrhqRLzakgfYPu -p c=XZC --gpu-platform 2 -I 18 --worksize 32 --gpu-fan 80 --temp-target 65 --temp-overheat 80

[kix93]

2018.06.12
dashboard and new miner
added miner ccminer-tpruvot-v2.2.6-cuda8.0 (PHI2 , Allium Support)
added miner xmr-stak-v2.4.5
>>>>you can now ENABLE OhGodAnETHlargementPill in global options in dashboard (will work only on GTX 1080 and 1080TI)<<<<
added decimal xx.x % values in vote poll
server optimization regarding session/cookies


Guys any success with OhGodAnETHlargementPill I tried it and all rigs that have 1080 and 1080ti crashed badly

[SavageMine]

How can I turn off auto-updates for my rigs?
I am running rigs in a remote location and we have limited bandwidth.

Windows 10?

Windows logo key+R.
Run services.msc.
Scroll to Windows Update and double-click on it.
For Startup Type, select Disabled then click OK.

Then...

Windows logo key+R.
Run gpedit.msc.
Browse to Computer Configuration | Administrative Templates | Windows Components | Windows Update.
Double-click Configure Automatic Updates.
Choose Disabled in Configured Automatic Updates then click OK.
NOTE: If you want to receive updates, but just want to control how it happens, just go into Settings | Update and Security | Advanced Options. Also check out Delivery Optimization and then Advanced.

Hope this helps!

[Raidin]

UPDATE v1176:
- Nvidia start script starts faster and waits for xorg launch
- Fan script fix for R/RX/NV (had one bad condition case)
- If SSH password is default miner/miner or root/miner then it will be changed to your email

admin please, please, please, help us with stak intensity, I lose hasrate important to me.

[tytanick]

Guys any success with OhGodAnETHlargementPill I tried it and all rigs that have 1080 and 1080ti crashed badly

Try to disable OC and see if that will help.
Can you set OC to
core: 0
mem: 0
?
See if that will help and write me back
Yet i think you should ask about this LAB feature somewere else - on this tool thread

admin please, please, please, help us with stak intensity, I lose hasrate important to me.

Please write to admin@simplemining.net with subject "Question about stak intensity to Tytus"
And please write me what it is about. I think i recall something but i need to know the details again.