[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[nightfury626]

can we please get an update on xmrig miner?

[bracinac]

Did anyone notice that Power settings for MSI nVidia 1080Ti cards is not working properly?
Gaming X and Armor cards should be set up 10-20W more to get the wanted power level.
For example, 1080ti set to 210W to get 180W power level on card.

Gaming X 1070ti are working properly.


But today I've found that 1070 (non TI) drawing 115W power for every setting lower than 115W

Here is for the 80W-115W power level:

ETH:
[INFO] [2018-07-01T10:03:54 02:00] [GPU 0] Speed: 30.28 MH/s Temp: 64C Fan: 30% Power: 115W 0.27 MH/J

Equihash:
[INFO] [2018-07-01T10:15:15 02:00] [GPU 0] Speed: 459.08 Sol/s 241.32 Nonce/s Temp: 65C Fan: 34% Power: 115W 3.99 Sol/J


For higher power it takes what you set, for lower, can't go below 114W-115W

[driodalpha]

Can anyone tell how to use this Shellinabox in simplemining in which command what will show?

[lrpena]

To display local console use:  sudo cat /dev/vcs

[cady94]

Looks like it opens a telnet session on your miner.  You can use:  screen -x miner   to keep a running console display of your miner.   You can exit that with   Ctl-a and while still holding, press   d   too.

[joaocha]

today some off my rigs are 0 MHS

i looked in the log and

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

im not mining to NANOPOOL, i tried to change address on config to ethermine or ethermine using SSL, and this persist

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

i changed to Cryptonight miner,


and this again, using monero miner it tries to connected to nanopool on ETH

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

10 rigs are in this way

What da fock?

H4ck3d?

[DIV333]

Lyra2REv2 settings for 1070 Amor ?

[driodalpha]

To display local console use:  sudo cat /dev/vcs

thanks bro 

[xpulse]

Gents,

Did someone experienced issue with fan on 1080 ti.
Looks like after latest update, 2 cards during starting SMOS stops the fan, and never spin on it again.
Fan control in overclocking doesn't make any difference, and not making any changes to fan speed for any cards in rig.

On windows 10 everything is working fine.

Thanks.

[artix_1]

with rx570 8gb nitro + modified microm memory,
xmrig-amd-v2.6.1 does not exceed 680 h / s per card, cryptonight-heavy protocol.

config used

-a cryptonight-heavy --opencl-platform = 0 --opencl-devices = 0,0,1,1,2,2,3,3,4,4,5,5 --opencl-launch = 1000x8,1000x8 , 1000x8,1000x8,1000x8,1000x8,1000x8,1000x8,1000x8,1000x8,1000x8,1000x8 -o stratum + tcp: loki.miner.rocks: 5555 -u wallet. $ RigName -px --donate-level = 1 --print-time = 5
with overclocking core 1100 memory 2100 undervolt 850
as a rule it should do at least 860 h / s

[driodalpha]

what more can we do in shellinthebox

[DIV333]

Lyra2REv2 settings for 1070 Amor ?

No one is running 1070s in Lyra2REv2  ? I am looking for the overclock settings
Thanks 

[nadeaup]

Lyra2REv2 settings for 1070 Amor ?

No one is running 1070s in Lyra2REv2  ? I am looking for the overclock settings
Thanks 

All 1080ti's or AMD cards here.. Do some some experiments and post back to the group for others.

[tytanick]

today some off my rigs are 0 MHS

i looked in the log and

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

im not mining to NANOPOOL, i tried to change address on config to ethermine or ethermine using SSL, and this persist

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

i changed to Cryptonight miner,


and this again, using monero miner it tries to connected to nanopool on ETH

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

10 rigs are in this way

What da fock?

H4ck3d?

It just mean that your rig cannot connect nanopool for some reason.
So it could be cloudflare, it could be nanopool hositn, it could be your connection.
Anyway, cloudflare had problem yesterday so i guess half of the internet could not work properly.

[rx570]

Suggestions will be appreciated. Rig is running very stable with 8 x 570 cards.

https://i.imgur.com/k6qlwze.png

https://i.imgur.com/mMTlBJA.png

https://i.imgur.com/bZnfaaE.png

[adore]

Suggestions will be appreciated. Rig is running very stable with 8 x 570 cards.

...

if you use the same core/mem clocks for all cards, why seperate them?

[sassouqui1]

Hello,

i'm on SMOS for 6 month now, everything was great until this morning

my rig is running and mining like everyday except the fact that in simplemining platform it shows me that it's off
pool stats are OK too, rig still mining

any idea ?

[tytanick]

what more can we do in shellinthebox

It is for advanced users who wants to log into rig via ssh
one of the most popular things is just to enter ssh
login: miner
password: your@email
and then just type command:
screen -x miner
You will be able to see miner console in real time and also interact with it ( for example in claymore pressing s key)

Anyway it is just to make it little bit easier for advanced users.
Instead of using putty SSH client, now they just can do all the "things" via ssh in browser.
Anyway if you did not used ssh, it is better not to mess with it
I am officially am not supporting any modifications is system as this could result in unstability and also in banning account in very extreme cases
But do not worry, i did not banned anyone so far

[joaocha]

today some off my rigs are 0 MHS

i looked in the log and

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

im not mining to NANOPOOL, i tried to change address on config to ethermine or ethermine using SSL, and this persist

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

i changed to Cryptonight miner,


and this again, using monero miner it tries to connected to nanopool on ETH

ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

10 rigs are in this way

What da fock?

H4ck3d?

It just mean that your rig cannot connect nanopool for some reason.
So it could be cloudflare, it could be nanopool hositn, it could be your connection.
Anyway, cloudflare had problem yesterday so i guess half of the internet could not work properly.

I did not mine NANOPOOL, my config it to mine on ETHERMINE, half of my rigs are working fine,on same config

i have to remake 10 pendrives, to everything works again, so somehow someone manage to hack my machines and change the script that grep the config from files and start the mienr

[magicsys.nw]

Can I start OhGodAnETHlargementPill any way though SSH? Only for 1 rig.