[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tytanick]

tytanick for the amazing work ure doing.

Any reason why the telegram bot is not allowed to work in a group? We have a mining farm that we maintain as a group, and it really sucks that only 1 member get notified about a rig going offline.

I hope u provide a solution for that asap, and thank u again for ur time and effort toward the community.

We have that feature curently in progress in our dev enviroment so it should be soon

[tytanick]

UPDATE - added miners
- added ethminer-v0.16.0.dev1
- added lolminer-v0.4

[lutek_narozniak]

getting error message:

" terminate called without an active exception
  /root/xminer.sh: line 102: 14135 Segmentation fault $MINER_PATH $MINER_OPTIONS

  Miner ended/crashed. Restarting miner in 10 seconds "

with ethminer 0.16.0.dev1

command line: -U -P stratum2+tcp://BTC_WALLET.WORKERNAME@daggerhashimoto.usa.nicehash.com:3353

[(:nevem]

Hi, Master!

I have same error message when start the ethminer0.16_dev1

[tytanick]

Hi, Master!

I have same error message when start the ethminer0.16_dev1

Please test for example with nanopool. We tested this pool. Also this is dev version so i guess it can have some problem.
I suggest going to etherminer thread and ask there.

[tytanick]

Information for Venezuela or even whole Brasil
Right now i see that Venezuela (and only that country) have some problems connecting to simplemining.net
I reported this to cloudflare and waiting for result.
Cloduflare status says that they have problem and they have that in cloudflare status as global notice:
https://www.cloudflarestatus.com/

[nadeaup]

Can you add support for multiple overclocking profiles (like HiveOS has). I think it would be very helpful to quickly retune a rig for Hot Days, Cold days, Normal Days or even by season...

Right now, on very hot days, I switch the Algo I mine with on 2 of my 11 rigs to manage heat. Takes too much time to tune each rigs overclocks manually every time... I would also use slightly more aggressive overclocks at night vs daytime...

Another feature could be to have the rigs automatically choose a profile. If rig has cards over 80 degrees it flips the rig to profile 2 for 4 hours or something like that..could be profiles by temperature... <60's profile 60-75 profile, 76+ profile...

[tytanick]

Can you add support for multiple overclocking profiles (like HiveOS has). I think it would be very helpful to quickly retune a rig for Hot Days, Cold days, Normal Days or even by season...

Right now, on very hot days, I switch the Algo I mine with on 2 of my 11 rigs to manage heat. Takes too much time to tune each rigs overclocks manually every time... I would also use slightly more aggressive overclocks at night vs daytime...

Another feature could be to have the rigs automatically choose a profile. If rig has cards over 80 degrees it flips the rig to profile 2 for 4 hours or something like that..could be profiles by temperature... <60's profile 60-75 profile, 76+ profile...

Right now we have few small things that are in development but the OC feature is something that is next.
More people want it and it will be done

[lutek_narozniak]

Hi, Master!

I have same error message when start the ethminer0.16_dev1

Please test for example with nanopool. We tested this pool. Also this is dev version so i guess it can have some problem.
I suggest going to etherminer thread and ask there.

Tried with other pools (nanopool, dwarfpool, sparkpool) and getting the same error message:

============ Starting Miner ===============
m 18:54:05 ethminer ethminer 0.16.0.dev1
m 18:54:05 ethminer Build: linux/release
terminate called without an active exception
/root/xminer.sh: line 102: 4666 Segmentation fault $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

No problems with ethminer-v0.14.0.

[Jombazi]

Can you add support for multiple overclocking profiles (like HiveOS has). I think it would be very helpful to quickly retune a rig for Hot Days, Cold days, Normal Days or even by season...

Right now, on very hot days, I switch the Algo I mine with on 2 of my 11 rigs to manage heat. Takes too much time to tune each rigs overclocks manually every time... I would also use slightly more aggressive overclocks at night vs daytime...

Another feature could be to have the rigs automatically choose a profile. If rig has cards over 80 degrees it flips the rig to profile 2 for 4 hours or something like that..could be profiles by temperature... <60's profile 60-75 profile, 76+ profile...

Right now we have few small things that are in development but the OC feature is something that is next.
More people want it and it will be done

Yes, this please.

[tytanick]

Hi, Master!

I have same error message when start the ethminer0.16_dev1

Please test for example with nanopool. We tested this pool. Also this is dev version so i guess it can have some problem.
I suggest going to etherminer thread and ask there.

Tried with other pools (nanopool, dwarfpool, sparkpool) and getting the same error message:

============ Starting Miner ===============
m 18:54:05 ethminer ethminer 0.16.0.dev1
m 18:54:05 ethminer Build: linux/release
terminate called without an active exception
/root/xminer.sh: line 102: 4666 Segmentation fault $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

No problems with ethminer-v0.14.0.

This dev ethminer has some bugs so i moved it into trash.
We will add it as soon as there will be stable version.

[lutek_narozniak]

Hi, Master!

I have same error message when start the ethminer0.16_dev1

Please test for example with nanopool. We tested this pool. Also this is dev version so i guess it can have some problem.
I suggest going to etherminer thread and ask there.

Tried with other pools (nanopool, dwarfpool, sparkpool) and getting the same error message:

============ Starting Miner ===============
m 18:54:05 ethminer ethminer 0.16.0.dev1
m 18:54:05 ethminer Build: linux/release
terminate called without an active exception
/root/xminer.sh: line 102: 4666 Segmentation fault $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

No problems with ethminer-v0.14.0.

This dev ethminer has some bugs so i moved it into trash.
We will add it as soon as there will be stable version.

Thank you Tytanick. I have opened a new issue on ethminer github. No fix to the problem as of yet.
Any chances you could add ethminer 0.15.0 as this is the latest stable version (released on the same day as 0.16.0.dev1 if I'm not mistaken) ?
https://github.com/ethereum-mining/ethminer/releases

[klondike_bar]

Whats the best option for 1070ti cards right now? doing pretty well on ETH, but i think lyra2z would be more profitable if cryptodredge or similar was available in SMOS

[TommyQR]

Hi guys,

I need help and cannot find anything about in the thread. I paused mining (holidays) for a few days, but cannot start the miner (running for more than 7 months now) again.
Is telling me:

Welcome to emergency mode!.... blabla

I updated the BIOS, checked every riser connection, reflashed SMOS on USB stick, but nothing worked. It´s crazy.


If someone had the same issue and knows what to do: PLEASE help! 

[marcos5872]

Hi guys,

I need help and cannot find anything about in the thread. I paused mining (holidays) for a few days, but cannot start the miner (running for more than 7 months now) again.
Is telling me:

Welcome to emergency mode!.... blabla

I updated the BIOS, checked every riser connection, reflashed SMOS on USB stick, but nothing worked. It´s crazy.


If someone had the same issue and knows what to do: PLEASE help! 

Did you try to run SMOS without GPUs?? Only CPU and MOBO?

[TommyQR]

Hi guys,

I need help and cannot find anything about in the thread. I paused mining (holidays) for a few days, but cannot start the miner (running for more than 7 months now) again.
Is telling me:

Welcome to emergency mode!.... blabla

I updated the BIOS, checked every riser connection, reflashed SMOS on USB stick, but nothing worked. It´s crazy.


If someone had the same issue and knows what to do: PLEASE help! 

Did you try to run SMOS without GPUs?? Only CPU and MOBO?

Yes, unplugged all the risers but had the same error.

[tytanick]

Dashboard update: v3063
- new google captcha which should be less annoying and invisible in most cases
- in fee deposit address modal, you will see now exchange - this is because some people are sending ETH to ETC address and vice versa by mistake

Update v1182
- added ethminer-v0.15.0
- added some miner speed parsers
- RX OC values in dashboard are now in the right order when you have 10+ GPUs
- RX OC now works for 15+ GPUs

[lutek_narozniak]

Dashboard update: v3063
- new google captcha which should be less annoying and invisible in most cases
- in fee deposit address modal, you will see now exchange - this is because some people are sending ETH to ETC address and vice versa by mistake

Update v1182
- added ethminer-v0.15.0
- added some miner speed parsers
- RX OC values in dashboard are now in the right order when you have 10+ GPUs
- RX OC now works for 15+ GPUs

@Tytanick - thank you for adding that supposedly stable version of ethminer (v0.15.0). Unfortunately, it still doesn't work. At least not with my rig.
Similar error, but this time there is a little hint as of what may be a culprit:

============ Starting Miner ===============
m 18:53:58 ethminer ethminer 0.15.0
m 18:53:58 ethminer Build: linux/release
Error: Insufficient CUDA driver: 9010
terminate called without an active exception
/root/xminer.sh: line 102: 3455 Aborted $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

Edit:
According to the post of one of ethminer collaborators, we need NVIDIA Driver 396+ to mine on the latest ethminer versions (v.0.15 and above).
Whole thread here: https://github.com/ethereum-mining/ethminer/issues/1378

We're still running on Driver Version: 390.67 if I'm not mistaken?

[(:nevem]

Dashboard update: v3063
- new google captcha which should be less annoying and invisible in most cases
- in fee deposit address modal, you will see now exchange - this is because some people are sending ETH to ETC address and vice versa by mistake

Update v1182
- added ethminer-v0.15.0
- added some miner speed parsers
- RX OC values in dashboard are now in the right order when you have 10+ GPUs
- RX OC now works for 15+ GPUs

@Tytanick - thank you for adding that supposedly stable version of ethminer (v0.15.0). Unfortunately, it still doesn't work. At least not with my rig.
Similar error, but this time there is a little hint as of what may be a culprit:

============ Starting Miner ===============
m 18:53:58 ethminer ethminer 0.15.0
m 18:53:58 ethminer Build: linux/release
Error: Insufficient CUDA driver: 9010
terminate called without an active exception
/root/xminer.sh: line 102: 3455 Aborted $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

Edit:
According to the post of one of ethminer collaborators, we need NVIDIA Driver 396+ to mine on the latest ethminer versions (v.0.15 and above).
Whole thread here: https://github.com/ethereum-mining/ethminer/issues/1378

We're still running on Driver Version: 390.67 if I'm not mistaken?

Yes, please. (:

(But somebody say: 396 is not stable enough. I used this a month ago and was work fine with lots of GPUs. Only 1 piece GTX 1060 6G with Hynix memchip make some problem. Little bit lower OC settings solved the problem)

[x001tk]

Dashboard update: v3063
- new google captcha which should be less annoying and invisible in most cases
- in fee deposit address modal, you will see now exchange - this is because some people are sending ETH to ETC address and vice versa by mistake

Update v1182
- added ethminer-v0.15.0
- added some miner speed parsers
- RX OC values in dashboard are now in the right order when you have 10+ GPUs
- RX OC now works for 15+ GPUs

@Tytanick - thank you for adding that supposedly stable version of ethminer (v0.15.0). Unfortunately, it still doesn't work. At least not with my rig.
Similar error, but this time there is a little hint as of what may be a culprit:

============ Starting Miner ===============
m 18:53:58 ethminer ethminer 0.15.0
m 18:53:58 ethminer Build: linux/release
Error: Insufficient CUDA driver: 9010
terminate called without an active exception
/root/xminer.sh: line 102: 3455 Aborted $MINER_PATH $MINER_OPTIONS
Miner ended/crashed. Restarting miner in 10 seconds --------------

Edit:
According to the post of one of ethminer collaborators, we need NVIDIA Driver 396+ to mine on the latest ethminer versions (v.0.15 and above).
Whole thread here: https://github.com/ethereum-mining/ethminer/issues/1378

We're still running on Driver Version: 390.67 if I'm not mistaken?

Yes, please. (:

(But somebody say: 396 is not stable enough. I used this a month ago and was work fine with lots of GPUs. Only 1 piece GTX 1060 6G with Hynix memchip make some problem. Little bit lower OC settings solved the problem)

Does anyone know how to install 396 nvidia driver manually? If a make apt-get install nvidia-396, I have errors with "Read only filesystem"
Thank you