[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[crypto_curious]

Hi all,

I am trying to investigate one rig, which resets every hour or so. I have 132 restart in few days.
Using 4x AMD Radeon 480 and 1x AMD Radeon 580.

Current OC settings are somewhat conservative:
Core MHz: 1000
Memory MHz: 2000
Core undervolt: 900
Powerstage: 3

Each time system reboots, I lose claymore-eth-v11.9 log file so I don't know what caused reboot. Is there any way to fix this?

I had similar issue months ago - I replaced the PSU and RAM - and the problem went away.

Lol, maybe I should replace whole miner? This is software issue, that it doesn't allow me to diagnose hardware in easy way.

I had to write script to redirect tail of log file to separate log file every 15 seconds. Then I read it after reboot and see if it catched anything about GPU error. And I found it, GPU1, always the same, causes reboots and hungs. It was not easy task to do :/ Taking into account my limitation in remote control of the rigs and very hard access to them.
Now I will prepare to replace riser and clean out card, this should help. not replacing half of the miner, for Christ sake....

[ekiller]

  İnstallation :


6) Enable onboard graphics to default (PEG - > IDG)

Not  IDG , 

IGD is True

[m50b25]

Does anyone know how to Mine Loki or other types of Cryptonight Heavy coins with the newer xmrig-amd or xmrstack?
they dont support the newer amd drivers.

[SavageMine]

Does anyone know how to Mine Loki or other types of Cryptonight Heavy coins with the newer xmrig-amd or xmrstack?
they dont support the newer amd drivers.

You have to use an smOS image that uses AMD 18.10 drivers, not the 18.30 drivers.

https://download.simplemining.net/SimpleMiningOS-NV-RX-v1185-4.17.19-9-amd18.10-nv410.66.img.zip

[SavageMine]

Does anyone know how to Mine Loki or other types of Cryptonight Heavy coins with the newer xmrig-amd or xmrstack?
they dont support the newer amd drivers.

And be sure to dual-thread (XMR-STAK) for maximum hashrates! :-)

https://youtu.be/g_s6Al318Pc

[tytanick]

Update:
new miner - gminer-v1.10
new miner - phoenixminer-v4.0a
cryptodredge-v0.12.0
t-rex-v0.8.2

[crypto_curious]

Admin,

Do you have any suggestion, how I determine which card caused whole system reboot? It's still bugging me and it's solved nicely on HiveOS, but not in SM :/

[valkir]

Hey tytanick

do you have any plan to implement the beam equihash gpu miner as soon as the mainnet is released ?
That could be awesome. Let me know if you need more info. 

[Peeps]

Any plans on adding TeamRedMiner ?

[Nvid]

Update:
new miner - gminer-v1.10
new miner - phoenixminer-v4.0a
cryptodredge-v0.12.0
t-rex-v0.8.2

Please add the new t-rex-v0.8.3

[davor_vfr]

Hi there,

Last few days I have problem with mining CLO with claymore miner.

This is where my rig stop and block

Code:

Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press _s_ for current statistics, _0_.._9_ to turn on/off cards, _r_ to reload pools, _e_ or _d_ to select current pool, _x_ to select GPU, _z_ to find best -dcri values
OpenCL initializing...
AMD Cards available: 4
GPU #0: Ellesmere (Radeon RX 580 Series), 6236 MB available, 36 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere (Radeon RX 580 Series), 6477 MB available, 36 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon RX 480/580
GPU #2: Ellesmere (Radeon RX 580 Series), 6501 MB available, 36 compute units (pci bus 6:0:0)
GPU #2 recognized as Radeon RX 480/580
GPU #3: Ellesmere (Radeon RX 580 Series), 6501 MB available, 36 compute units (pci bus 8:0:0)
GPU #3 recognized as Radeon RX 480/580
POOL/SOLO version
AMD ADL library not found.

Don't know how to add image but this is what I get via web console in SM:
https://i1062.photobucket.com/albums/t490/davor_vfr/temp_zpsjudnnyup.jpg

Last week everything was great with mining CLO.

Here is my RIG info - maybe can help.
https://i1062.photobucket.com/albums/t490/davor_vfr/riginfo_zpsbwqacr6g.jpg
I have 5x sapphire rx 580

I switched back to XHV untill I get some help.

EDIT:
I have same error on all algos.
Any help?

Risers? Old OS? Power supply?

[BogdanCo]

Hi there,

Last few days I have problem with mining CLO with claymore miner.

This is where my rig stop and block

Code:

Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press _s_ for current statistics, _0_.._9_ to turn on/off cards, _r_ to reload pools, _e_ or _d_ to select current pool, _x_ to select GPU, _z_ to find best -dcri values
OpenCL initializing...
AMD Cards available: 4
GPU #0: Ellesmere (Radeon RX 580 Series), 6236 MB available, 36 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere (Radeon RX 580 Series), 6477 MB available, 36 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon RX 480/580
GPU #2: Ellesmere (Radeon RX 580 Series), 6501 MB available, 36 compute units (pci bus 6:0:0)
GPU #2 recognized as Radeon RX 480/580
GPU #3: Ellesmere (Radeon RX 580 Series), 6501 MB available, 36 compute units (pci bus 8:0:0)
GPU #3 recognized as Radeon RX 480/580
POOL/SOLO version
AMD ADL library not found.

Don't know how to add image but this is what I get via web console in SM:


Last week everything was great with mining CLO.

Here is my RIG info - maybe can help.

I have 5x sapphire rx 580

I switched back to XHV untill I get some help.

EDIT:
I have same error on all algos.
Any help?

Risers? Old OS? Power supply?

Usually when I had that 511 degrees on the screen, there was always a faulty hardware. What is strange is that it shows only 6GB memory for every card... all are with 8Gb, no?

[davor_vfr]

Usually when I had that 511 degrees on the screen, there was always a faulty hardware. What is strange is that it shows only 6GB memory for every card... all are with 8Gb, no?

Yes they are 8 Gb. Strange indeed.
Have to check is that same on all miners...

[mittyredstar]

Nvidia rig it's OK, now rig AMD RX 580 go crazy. All 6 video card it's XFX RX 580 8gb, same model :

No   Model         Core  Mem   Fan % Temp *C
0   RX 470/480   1185   2120   60   63
1   RX 470/480   1185   2120   88   63
2   RX 470/480   1185   2120   60   62
3   RX 470/480   1185   2120   80   62
4   RX 470/480   1185   2120   67   63
5   RX 470/480   1185   2120   51   63

Rig Name:   rx580
Group Name:   Ethereum
Group OC:   
OS version:   1186
Kernel version:   4.17.19-smos10
Driver version:   AMD 18.10

[tytanick]

UPDATE - added new miner versions:
cryptodredge-v0.13.0
t-rex-v0.8.5
xmr-stak-v2.7.0
z-enemy-v1.26

[tytanick]

UPDATE - new miner version
z-enemy-v1.27-cuda10.0

[bracinac]

with Z-enemy 1.27 I've got on all rigs:


/root/xminer.sh: line 85: cd: /root/miner/z-enemy-v1.27-cuda9.2: No such file or directory
/root/xminer.sh: line 95: /root/miner/z-enemy-v1.27-cuda9.2/z-enemy: No such file or directory
Miner ended/crashed. Restarting miner in 10 seconds --------------

[tytanick]

with Z-enemy 1.27 I've got on all rigs:


/root/xminer.sh: line 85: cd: /root/miner/z-enemy-v1.27-cuda9.2: No such file or directory
/root/xminer.sh: line 95: /root/miner/z-enemy-v1.27-cuda9.2/z-enemy: No such file or directory
Miner ended/crashed. Restarting miner in 10 seconds --------------

Please try now. My mistake.

[bracinac]

with Z-enemy 1.27 I've got on all rigs:


/root/xminer.sh: line 85: cd: /root/miner/z-enemy-v1.27-cuda9.2: No such file or directory
/root/xminer.sh: line 95: /root/miner/z-enemy-v1.27-cuda9.2/z-enemy: No such file or directory
Miner ended/crashed. Restarting miner in 10 seconds --------------

Please try now. My mistake.

It's working now. Grazie!

[tytanick]

Update v1187
- added z-enemy-v1.27
- improved protection of system integrity
- human friendly system messages in terminal and GUI Console
- optimized new exchange information subsystem
- clear GUI miner stats at miner/rig restart
- more precise message if miner API not detected
- clear console logs during rig reboot and miner restart
- fix bminer parser with large numbers (add K and M preunits)
- change CryptoDredge parser do API
- add gminer API
- fix t-rex parser 1MH=1000K (we had 1MH=1024K by mistake which showed lower values than it were... .too much megabits  )