[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[davemanet]

Oh ok I am using default claymore 9.6 with the below command.  It is weird I don't have dual mining decred setup, yet my system is dual mining it. do you know what i can change?

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333

with that command it is dualmining ? show me screen please this is ethonly mode

hi ah ok you are right.  for some reason that rig group just reverted to none and started dual mining.  I had to reassign the group and it worked.

can you share your command line for dual mining?  i want to try to do it too.  how much more power does it use for you?

[1714050432]

1714050432

[logicassets]

Word. I'd pay maybe $20 for an app that could customize assignment. 

Can anyone explain how btc h110 pro sets an order of the slots?

Not even God can predict the mapping of the physical slots to GPU indexes - you'll have to test.

[CatOhCat]

Please help. I'm using simplemining with RX550 and the screen shows that the card crashed. Error: Unknown_error when calling clGetPlatformIDs . Is there any way to get RX 550 to work in Linux?

[Wolverine_Na]

hey guys,

i just installed simplemining os and got it running. i got a 5*rx480 and 1*rx470 all 8g msi cards rig. can someone tell me the ideal overclocking settings on simplemining.net? cheers!

Try this :

Core MHz: 1100
Memory MHz: 2000,2000,2000,1975,1975,1975
Core Unvervolting: 800
Powerstage: 3
Target Temperature ℃: 71
Minimum Fan speed %: 80

Memory overclocking is depended on ram.

[davemanet]

hey guys,

i just installed simplemining os and got it running. i got a 5*rx480 and 1*rx470 all 8g msi cards rig. can someone tell me the ideal overclocking settings on simplemining.net? cheers!

Try this :

Core MHz: 1100
Memory MHz: 2000,2000,2000,1975,1975,1975
Core Unvervolting: 800
Powerstage: 3
Target Temperature ℃: 71
Minimum Fan speed %: 80

Memory overclocking is depended on ram.

all cards are different you should start lower at first then higher to these levels

[timbereagle]

Hello,

I have 8 rigs with similar setups. If I use SMOS and lets say when settings reseted.

How can I differentiate rig identities?

For example how can I know Rig1 is which one in SMOS?

Because I need to use special overclocking for each rig.

[logicassets]

Start one rig on SmOS. In the management console, you will see the unnamed rig (auto assigned to the default group). Name the rig and assign it to the group you want. Then do this for each additional rig...

Hello,

I have 8 rigs with similar setups. If I use SMOS and lets say when settings reseted.

How can I differentiate rig identities?

For example how can I know Rig1 is which one in SMOS?

Because I need to use special overclocking for each rig.

[timbereagle]

Start one rig on SmOS. In the management console, you will see the unnamed rig (auto assigned to the default group). Name the rig and assign it to the group you want. Then do this for each additional rig...

Hello,

I have 8 rigs with similar setups. If I use SMOS and lets say when settings reseted.

How can I differentiate rig identities?

For example how can I know Rig1 is which one in SMOS?

Because I need to use special overclocking for each rig.

Thank you for answer. But if electricity goes out and 8 rig starts at same time then I will be in trouble it seems. Then I can not recognize which one is which rig 

[Saradu]

Hi guys. I have my 6 gpu rig for 3 months now and I have to say that I was lucky not to have any problems,overclocking works,undervolting work,had to replace a riser 2 weeks ago but nothing else so thats Smos for beeing Simple:). I want to try dual mining to see what's what but from my initial speed of 166Mh/s on ether, I now get 100mh/s eth and 3220mh/s siacoin. I ve read 100 pages back and on Claymores Dual Mining thread and I know I should ad a "-ethi" and "-dcri" somewhere.
I am using this:

 -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_WALLET/YOUR_WORKER/YOUR_EMAIL -dcoin sia
     I get 100 on eth and 3220 on sia

If I try:

 -epool eu1.nanopool.org:9999 -ewal YOUR_ETH_WALLET/YOUR_WORKER/YOUR_EMAIL -epsw x -dpool stratum+tcp://sia-eu1.nanopool.org:7777 -dwal YOUR_SIA_WALLET/YOUR_WORKER/YOUR_EMAIL -dcoin sia -dcri 2
     I get 160 on eth and 160 on sia

Happy for some help:). Thanks

[timbereagle]

Start one rig on SmOS. In the management console, you will see the unnamed rig (auto assigned to the default group). Name the rig and assign it to the group you want. Then do this for each additional rig...

Hello,

I have 8 rigs with similar setups. If I use SMOS and lets say when settings reseted.

How can I differentiate rig identities?

For example how can I know Rig1 is which one in SMOS?

Because I need to use special overclocking for each rig.

Thank you for answer. But if electricity goes out and 8 rig starts at same time then I will be in trouble it seems. Then I can not recognize which one is which rig 

I don't use SMOS, so this may not apply, but... I assume that the rig management console shows the hostname of the rig? I name all mine - never have an issue with knowing which is which. Freya has six GPUs and is in the basement, Artica is the Vega test rig, Naomi is the main development rig, etc.

Thank you, I will try adding more rigs to SMOS and will add note to each miner (nicknames or numbers ) and will see the results .

[logicassets]

The rig name, settings and group should be saving locally. Unless the rig is a new build or I manually deleted the rig, SmOS remembers the rigs.

Start one rig on SmOS. In the management console, you will see the unnamed rig (auto assigned to the default group). Name the rig and assign it to the group you want. Then do this for each additional rig...

Hello,

I have 8 rigs with similar setups. If I use SMOS and lets say when settings reseted.

How can I differentiate rig identities?

For example how can I know Rig1 is which one in SMOS?

Because I need to use special overclocking for each rig.

Thank you for answer. But if electricity goes out and 8 rig starts at same time then I will be in trouble it seems. Then I can not recognize which one is which rig 

[maskara_a]

Hi guys,

I have a problem with my rig. Yesterday evening I got a error message:

CUDA error 73 - cannot write buffer for DAG
GpuMiner cu_kd failed 73 (0), an illegal instruction was encountered

AsRock H110 PRO BTC+, 4GB RAM, 13x GeForce GTX 1060 3GB.

https://i.imgur.com/DazCPz3.jpg

[Alonelastway]

Hi, can we oc or uc induvidually for each gpu in the SOS? For exp gpu1 cc1100,mc1200 gpu2 cc1250,mc1150 etc

[minerlai]

is there a cost to using this ?

[chuck732]

$2.00 per rig per month.

is there a cost to using this ?

[jonnyen]

hi,

can someone please show me a config for SMOS rig with RX AMD mining to NiceHash?   many thanks.

[coinhicken]

I would like to experiment with this miner can we get it added?

https://bitcointalk.org/index.php?topic=2021765.0

It would really be fantastic if I could just upload my own binaries to my own rigs as one of the group options.

[sony87]

B250 mining expert mobo refuse to to boot from SMOS USB drive (the same drive boot on other machines). Anyone with such experience with this board ?

[brothervoid1]

B250 mining expert mobo refuse to to boot from SMOS USB drive (the same drive boot on other machines). Anyone with such experience with this board ?

I have the same issue. Works on all my other mobos but not my ASUS B250 Mining Expert. No idea how to fix it.

[cero10]

Hello guys, i have a problem running simpleOS with more than 7 gpus, either it will freeze while loading the OS or the last gpu i connect will replace another one connected before (still 7 gpus). what may be the culprit?

My hardware:

intel G3900
Asrock btc+ pro
4GB ram 2133