[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[shayne6975]

hi  shayne6975
with claymore 10.2

-xpool stratum+tcp://eu2.electromine.fr:7777 -xwal "Wallet Address" -xpsw x -mport -3333 -allpools 1

-mport -3333  ==> my_ip_rig:3333 to see the result

 

I have the above in my default settings and the rig is hashing but it is restarting every ten minutes.  ?

When the miner goes through and detects the cards after that it says XMR connection lost restarting miner. About every 1 minute

[1713979989]

1713979989

[1713979989]

1713979989

[1713979989]

1713979989

[1713979989]

1713979989

[1713979989]

1713979989

[Alonelastway]

Is there any way to check gpu memory error in smos? In windows we can use hwinfo

[jdash]

does smos support using pcie extender, say im using asrock 13gpu and will an extender to get 15 cards, is there any bios settings needed to add ?

thanks

[xPETEx]

does smos support using pcie extender, say im using asrock 13gpu and will an extender to get 15 cards, is there any bios settings needed to add ?

thanks

I've tried this myself, and I saw BBT try it, and the H110 won't POST at all with the expander. Doesn't matter what OS it won't even get to the BIOS.

SMOS does support those expanders though since I have one in another rig.

[jdash]

does smos support using pcie extender, say im using asrock 13gpu and will an extender to get 15 cards, is there any bios settings needed to add ?

thanks

I've tried this myself, and I saw BBT try it, and the H110 won't POST at all with the expander. Doesn't matter what OS it won't even get to the BIOS.

SMOS does support those expanders though since I have one in another rig.

what is BBT ? so you mean it could be a limitation of the motherboard.?

[xPETEx]

does smos support using pcie extender, say im using asrock 13gpu and will an extender to get 15 cards, is there any bios settings needed to add ?

thanks

I've tried this myself, and I saw BBT try it, and the H110 won't POST at all with the expander. Doesn't matter what OS it won't even get to the BIOS.

SMOS does support those expanders though since I have one in another rig.

what is BBT ? so you mean it could be a limitation of the motherboard.?

Bits Be Trippin - Youtube channel with a lot of great videos for miners. and yes.

[jdash]

thanks for the info, ill check him out, i hope someone was able to make it work with an extender

[sergitocrf]

Hello.
I need help, I just installed SimpleMining OS

Got
4 x RX 580 nitro+
Asrock H110
Corsair HX1200i
Celeron G3900
Crucial Ballistix 4GB ddr4

-wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -mport -3333 -asm 1

and I am getting 18mhs, how it's possible? What can I do?
Thanks for everything

Need more info from you:
1) did you flash new bios to the RX580? if not, you need to. Google anorak bios for your specific card and youtube how to flash them
2) Did you set higher memory clock speeds through the simplemining website?

1) No, I tried to install W7 but it's imposible already parched W7 with the asrock app but usb and p2p doesnt work.
 Exit any way to flash them through linux?
2) Yes

Thanks for the answer!

[NexusPrime]

You parameter [-dcri 5] is for dual mining. A ~1mh per GPU difference from windows to Linux is normal. Your hashrate is fine.

29.66mhs (ETH) per RX470 when dual mining is as good as it gets. What's your hash on eth only?

hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate

i own 6 Saphire RX 470 8gb hynix memory

i managed to get it 178hash but is there possibility for more without any issue ofc.

my settings are

core mhz: 1150
mem mhz: 2150

Core Unvervolting: 900

powerstage 6

-epsw x -tstop 75 -dcri 5

any expert can help me out with this please

its same mate 180hash just when i started on simplemine it droped to 178hash

btw im minning only Ethereum Classic ETC atm no dual nothing

aha but im not dual minning when i use this dcri 5 it incresses the hashrate but should i remove it or use another number instead

[sellscript]

I'm newbie with simplemining
how can I begin?

[logicassets]

For Eth-only, -dcri does nothing unless you are using -asm. From Claymore:

-dcri   Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed.
   You can also specify values for every card, for example "-dcri 30,100,50".
   You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key.
   For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred.

-asm   (AMD cards only) enables assembler GPU kernels. In this mode some tuning is required even in ETH-only mode, use "-dcri" option or or "+/-" keys in runtime to set best speed.
   Currently ETH-LBRY mode is not supported in assembler.
   Specify "-asm 0" to disable this option. You can also specify values for every card, for example "-asm 0,1,0". Default value is "1".
   If ASM mode is enabled, miner must show "GPU #x: algorithm ASM" at startup.
   Check "FINE-TUNING" section below for additional notes.
   NEW: added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.

Feel free to experiment. Results will vary.

You parameter [-dcri 5] is for dual mining. A ~1mh per GPU difference from windows to Linux is normal. Your hashrate is fine.

29.66mhs (ETH) per RX470 when dual mining is as good as it gets. What's your hash on eth only?

hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate

i own 6 Saphire RX 470 8gb hynix memory

i managed to get it 178hash but is there possibility for more without any issue ofc.

my settings are

core mhz: 1150
mem mhz: 2150

Core Unvervolting: 900

powerstage 6

-epsw x -tstop 75 -dcri 5

any expert can help me out with this please

its same mate 180hash just when i started on simplemine it droped to 178hash

btw im minning only Ethereum Classic ETC atm no dual nothing

aha but im not dual minning when i use this dcri 5 it incresses the hashrate but should i remove it or use another number instead

[NexusPrime]

For Eth-only, -dcri does nothing unless you are using -asm. From Claymore:

-dcri   Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed.
   You can also specify values for every card, for example "-dcri 30,100,50".
   You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key.
   For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred.

-asm   (AMD cards only) enables assembler GPU kernels. In this mode some tuning is required even in ETH-only mode, use "-dcri" option or or "+/-" keys in runtime to set best speed.
   Currently ETH-LBRY mode is not supported in assembler.
   Specify "-asm 0" to disable this option. You can also specify values for every card, for example "-asm 0,1,0". Default value is "1".
   If ASM mode is enabled, miner must show "GPU #x: algorithm ASM" at startup.
   Check "FINE-TUNING" section below for additional notes.
   NEW: added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.

Feel free to experiment. Results will vary.

You parameter [-dcri 5] is for dual mining. A ~1mh per GPU difference from windows to Linux is normal. Your hashrate is fine.

29.66mhs (ETH) per RX470 when dual mining is as good as it gets. What's your hash on eth only?

hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate

i own 6 Saphire RX 470 8gb hynix memory

i managed to get it 178hash but is there possibility for more without any issue ofc.

my settings are

core mhz: 1150
mem mhz: 2150

Core Unvervolting: 900

powerstage 6

-epsw x -tstop 75 -dcri 5

any expert can help me out with this please

its same mate 180hash just when i started on simplemine it droped to 178hash

btw im minning only Ethereum Classic ETC atm no dual nothing

aha but im not dual minning when i use this dcri 5 it incresses the hashrate but should i remove it or use another number instead

aha i understand but what do you suggest me to set for my rig configurations

[Warlockmng]

Hello guys,

Does anyone have Sapphire rx470 and Sapphire rx480 in the same RIG? SMOS is not detecting the GPUs if I mix 470 & 480. Already tested all cards one by one and also all 480 and all 470 and it's working fine.

It seems there is a compatibility issue, windows is also working fine.


Thanks in advance.

[redalert11]

I used to have a mix and never had issue.

[singlass]

please add Optiminer/Equihash 2.0.0 if you haven't yet
https://bitcointalk.org/index.php?topic=2390070.0

[gilmardal]

We need Optminer 2.0
https://github.com/Optiminer/OptiminerEquihash

[citronick]

We need Optminer 2.0
https://github.com/Optiminer/OptiminerEquihash

what is the performance gain from v1.7 to v2 ?

[DevonMiner]

Yes i will be adding few miners and dstm is one fo them.

Any news when this will happen? - No updates in changelog since 26th of last month ... 4 weeks ...

[ETHMinder]

My miner has been running without any problems, even Simplemining is showing the rig up time with a decent hashrate, however none of the blocks mined are being shown on Dwarfpool stats since about 8 hours ago. Is this still being processed? Am I missing something?

[xPETEx]

Hello,

Is there a way to restart the mining software if GPU hangs, or mhs drop below certain rate? A command or trick that can do that automatically.

Thanks

with Claymore add the following to the miner group command line : -r 1
this will reboot as soon as a GPU hangs

another option I use in Claymore is : -minspeed 123
where "123" is the minspeed you want in Mh, if the speed drops below that for more than 5 minutes it will either restarts the miner (default), or if -r 1 is also set it will reboot.

This is how mine is set:
-epool eth-us-west1.nanopool.org:9999 -ewal 0x1234454534543.$rigName/me@me.com -epsw x -r 1  -minspeed 375