[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[BlackwidowZA]

hello everybody, anyone knows why my rigs shut down continuously?

https://ibb.co/ge0p58

I am using SMOS in my rigs. In some cases the rigs shut down up to 50 times in under 24 hours. The motherboard's bios is set up to restart the rig once it looses power to the last state, meaning the rigs loop in a shut down/restart cycle that can go on for a while, sometimes more, sometimes less.

Hardware=

GPU: 6 x "XFX Radeon RX 580 GTS XXX Edition"
CPU: intel i3 8100
Motherboard: "gigabyte Z370 HD"

It worth notice that upon a lot or rigs with the same exact hardware in the same room, as you can see in the picture, the shut-down/restart process occurs from 2 to 48 times in less than a day. From what I know the rigs shouldn't shut down at all in normal condition. So, something is wrong. I don't know which should be the average rate for 24 hours per rig, if any.

I am using claymore-eth-v11.0 whit the following options: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333

Considerations:
1- The temperature could somehow trigger the process. The heat sensor could shut down the machine, the bios reboot the machine, the sensor still over the temperature threshold and shuts down again and so on. Sometimes after the cool down the vicious cycle continues though and sometimes the temperature doesn't justify the process.
2- When I detach all the raiser cables from the motherboard and unplug all the power cables from the PSU to the raisers and to the GPUs, the problem immediately stops and the rig doesn't shut down anymore. But of course, this is not a solution. Anyway this make me think the problem does not rely on the motherboard, CPU or RAM.
3- It could be that the raisers are damaged in some ways that I don't know, but the extent of the problem is so huge that I suppose it just couldn't be the case. Besides, I purchased them from at least 4 different vendors in amazon with good overall reviews.
4- It happens with both NVIDIA and AMD graphic cards.
5- My bios settings:
_Vtd: Disabled
_4g encoding: enabled
_power restore: "memory"
_internal graphic: disabled

the rest is on bios default mode

Questions:
1- What the hell am I doing wrong? I know people here seems to know a lot so help me out brothers!
2- How much is a normal shut down rate per day per rig? 0? 1? 10?

To all the brothers out there, I ask for help

If anyone can help I can provide a reward of 0.5 ethereum as long as it is effective. If interested please send me a pvt message

Might also be a psu problem. Seems that as soon as your cards start mining it trips the power and restarts. My rigs only restart when I update the software so in essance once a month at most

[1713251360]

1713251360

[1713251360]

1713251360

[1713251360]

1713251360

[muthu1979]

is there a method of profit switching - even if only based on the nicehash API profitability data?

Several solutions like awesomeminer can do this in a Windows environment.

So does, Nemosminer and Sniffdogminer.

Alternatively, on the SMOS Linux platform, the miner apps pointed to MPH or NH, technically answers your question

Hi,

Profitabiliy switched is based on one algorithm or multiple algorithm in Nice Hash.

If it is multiple algorithm can i have the script please.

If it is single algorithm i am using Mining pool hub for this.

Is Mining pool hub is best for single algorithm?

[Dogmygod]

Have 3 rigs.

Worked flawless for a 1 month.

Last week on 2 rigs on of the GPU crashes to the 0 mhz, and rig freezing.

All GPUs - rx 570 ROG

[HaberHash]

hello everybody, anyone knows why my rigs shut down continuously?

https://ibb.co/ge0p58

I am using SMOS in my rigs. In some cases the rigs shut down up to 50 times in under 24 hours. The motherboard's bios is set up to restart the rig once it looses power to the last state, meaning the rigs loop in a shut down/restart cycle that can go on for a while, sometimes more, sometimes less.

Hardware=

GPU: 6 x "XFX Radeon RX 580 GTS XXX Edition"
CPU: intel i3 8100
Motherboard: "gigabyte Z370 HD"

It worth notice that upon a lot or rigs with the same exact hardware in the same room, as you can see in the picture, the shut-down/restart process occurs from 2 to 48 times in less than a day. From what I know the rigs shouldn't shut down at all in normal condition. So, something is wrong. I don't know which should be the average rate for 24 hours per rig, if any.

I am using claymore-eth-v11.0 whit the following options: -wd 1 -r 1 -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x -allpools 1 -asm 1 -mport 127.0.0.1:3333

Considerations:
1- The temperature could somehow trigger the process. The heat sensor could shut down the machine, the bios reboot the machine, the sensor still over the temperature threshold and shuts down again and so on. Sometimes after the cool down the vicious cycle continues though and sometimes the temperature doesn't justify the process.
2- When I detach all the raiser cables from the motherboard and unplug all the power cables from the PSU to the raisers and to the GPUs, the problem immediately stops and the rig doesn't shut down anymore. But of course, this is not a solution. Anyway this make me think the problem does not rely on the motherboard, CPU or RAM.
3- It could be that the raisers are damaged in some ways that I don't know, but the extent of the problem is so huge that I suppose it just couldn't be the case. Besides, I purchased them from at least 4 different vendors in amazon with good overall reviews.
4- It happens with both NVIDIA and AMD graphic cards.
5- My bios settings:
_Vtd: Disabled
_4g encoding: enabled
_power restore: "memory"
_internal graphic: disabled

the rest is on bios default mode

Questions:
1- What the hell am I doing wrong? I know people here seems to know a lot so help me out brothers!
2- How much is a normal shut down rate per day per rig? 0? 1? 10?

To all the brothers out there, I ask for help

If anyone can help I can provide a reward of 0.5 ethereum as long as it is effective. If interested please send me a pvt message

Might also be a psu problem. Seems that as soon as your cards start mining it trips the power and restarts. My rigs only restart when I update the software so in essance once a month at most

- Why do you have internal graphics card disabled?  I use the internal graphics cards to monitor to rig.  I'd enable that.  Don't plug a monitor into your mining cards unless absolutely necessary.
- Did you bios mod your cards?
- I'd pull out all cards except one and start adding once you have 1 card running stable for a few hours.
- Disable any overclocks.  Your overclock could be at fault.

[maickol445]

Can I place amd more nvidia in the same rig?

[HaberHash]

Can I place amd more nvidia in the same rig?

No.

[gzf445]

hello.
what is the dev-fees of the xmr-stak?
i want to use it to mine xmr

[Raidin]

Does anyone know how to change the intensity in xmr-stak?

[dobriydimka]

Does anyone know how to change the intensity in xmr-stak?

The same problem.
Ask for help to admin SMOS.

[nightfury626]

hello.
what is the dev-fees of the xmr-stak?
i want to use it to mine xmr

i think its still at 5% unless it was changed. thats why i use xmrig

[tytanick]

UPDATE:
added z-enemy-v1.11

[citronick]

UPDATE:
added z-enemy-v1.11

Hi Tytanick,

Any luck on getting VEGA working with SMOS?

Thanks

[BogdanCo]

UPDATE:
added z-enemy-v1.11

Hi Tytanick,

Any luck on getting VEGA working with SMOS?

Thanks

Would be great to have Vega working with SMOS!

[klondike_bar]

whats the deal with this on my AMD rig? Claymore 11.8 (dcri 0, esm 3) shows 105MH in console for 4 rx4xx cards (good), but at nicehash the submitted hashrate jumps all over the place, and has averaged <50MH over 24hrs. console gives this:

Code:

Socket was closed remotely (by pool)
ETH: Connection lost, retry in 20 sec...
ETH: Stratum - connecting to 'daggerhashimoto.usa.nicehash.com' _169.62.79.71_ port 3353 (unsecure)
ETH: Stratum - Connected (daggerhashimoto.usa.nicehash.com:3353) (unsecure)
ETH: Authorized
ETH: 06/09/18-13:38:47 - SHARE FOUND - (GPU 2)
ETH: Share accepted (112 ms)!
GPU0 t=46C fan=27%, GPU1 t=48C fan=27%, GPU2 t=50C fan=27%, GPU3 t=47C fan=27%
ETH: 06/09/18-13:39:04 - SHARE FOUND - (GPU 2)
Socket was closed remotely (by pool)
ETH: Connection lost, retry in 20 sec...
GPU0 t=43C fan=27%, GPU1 t=45C fan=27%, GPU2 t=47C fan=27%, GPU3 t=43C fan=27%
ETH: Stratum - connecting to 'daggerhashimoto.usa.nicehash.com' _169.62.79.71_ port 3353 (unsecure)
ETH: Stratum - Connected (daggerhashimoto.usa.nicehash.com:3353) (unsecure)
ETH: Authorized

On further review, it appears that the cards are constantly changing epochs (8, 191, and 198 seem common) which must be a fault of nicehash profitability switching gone crazy?


meanwhile, my equihash rig reports about 10% hashrate at pool. Ive disabled GPU1 as it seems to cause a lot of reboots, and by doing so (-dev 0,2,3,4,5) it seems to compulsively spit out data for GPU2 and GPU4 dozens of times before an entry for GPU0, GPU3, or GPU5 is included:

Code:

GPU2 74C 25% | 271.2 Sol/s 269.0 Avg 147.1 I/s | 3.58 S/W 34 W | 0.00 . .
GPU4 58C 25% | 438.4 Sol/s 421.0 Avg 222.7 I/s | 4.61 S/W 37 W | 0.00 . .
============== | 1554.0 Sol/s 1534.4 Avg 821.8 I/s | 4.18 S/W 269 W | 0.00 . .
GPU4 58C 25% | 421.0 Sol/s 421.0 Avg 232.3 I/s | 4.61 S/W 37 W | 0.00 . .
============== | 1536.7 Sol/s 1534.4 Avg 831.4 I/s | 4.18 S/W 269 W | 0.00 . .
GPU2 74C 25% | 299.6 Sol/s 269.3 Avg 147.5 I/s | 3.58 S/W 34 W | 0.00 . .
GPU4 58C 25% | 487.6 Sol/s 421.3 Avg 229.5 I/s | 4.62 S/W 37 W | 0.00 . .
============== | 1631.7 Sol/s 1535.0 Avg 829.0 I/s | 4.18 S/W 269 W | 0.00 . .
GPU2 74C 25% | 283.8 Sol/s 269.4 Avg 146.5 I/s | 3.58 S/W 34 W | 0.00 . .
GPU4 58C 25% | 384.6 Sol/s 421.1 Avg 227.9 I/s | 4.62 S/W 37 W | 0.00 . .
============== | 1512.9 Sol/s 1534.9 Avg 826.5 I/s | 4.18 S/W 269 W | 0.00 . .
GPU2 74C 25% | 279.4 Sol/s 269.4 Avg 144.2 I/s | 3.58 S/W 77 W | 0.00 . .
recv: Connection reset by peer
# reconnecting
send: Broken pipe

[PowerEleven]

is there anyway to use gtx1080-1080ti eth hash rate improvement without shh?
if not where can i find a guide for doing that with shh?

We are still doing this feature.
The current RODO stupid law is curently stopped this feature.
But it is next on the list so it shoudl be very soon.

waiting very much for Enlargement pill for 1080ti!!!

[Pb67]

Dear friends, from yesterday one of my rig report this error and don't start anymore.
Was overclocked from 8 months in the same way.
I've also try with no overclock (0 in Core and 0 in memory) but error is the same.
Any idea? anybody have experienced with this issue?
Thank you.

http://imgur.com/a/j282cFx

[klondike_bar]

Dear friends, from yesterday one of my rig report this error and don't start anymore.
Was overclocked from 8 months in the same way.
I've also try with no overclock (0 in Core and 0 in memory) but error is the same.
Any idea? anybody have experienced with this issue?
Thank you.

http://imgur.com/a/j282cFx

often thats a result of a bad riser or poor seating of the riser/usb

[adore]

LUX did a hardfork and has a new algo: phi2
ccminer v2.2.6 is released here: https://github.com/tpruvot/ccminer/releases

[tytanick]

UPDATE v1176:
- Nvidia start script starts faster and waits for xorg launch
- Fan script fix for R/RX/NV (had one bad condition case)
- If SSH password is default miner/miner or root/miner then it will be changed to your email

[EGEE]

I got this error message "miner ended/crashed" with Sapphire Nitro+ RX580 8 GB (bios not modded), 9 graphic cards

Motherboard is Asrock H110 pro btc+
4 GB RAM

https://ibb.co/fbfYtT

Here is my config

claymore-eth-v11.8

-wd 1 -r 1 -epool ssl://eu1.ethermine.org:5555 -ewal "my wallet address" -esm 0 -epsw x -mode 1 -platform 2 -ftime 10 -mport 127.0.0.1:3334 -mpsw "password"