[Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free)

[tymeksm]

Miners update:
- gminer-v2.40-cuda9.2 (Performance improvements for KAWPOW. Improved compatibility with Ravencoin pools. Added option to control DAG buffering mode (single or dual, --dag_mode). Added option to support "Zombie Mode" for Ethash, Etchash and KAWPOW --dag_limit. Improved detection of freezing AMD GPUs. Fixed display of core and memory clocks. Display GPU PCI index on miner startup. Removed sero, vprogpow, progpowz, cuckarood29, cuckarood29v)
- lolminer-v1.18 (Improved zombie mode power draw & speed Polaris GPUs (R9 380, RX Fury, RX 4x0 and RX 5x0). Zombie mode now uses 0.5 to 1W less energy and is 0.2 to 0.4 mh/s faster. Added --zombie-tune parameter for Polaris - increase the performance of zombie mode by an other 5-15%, depending on parameter and epoch. Parameter --4g-alloc-size can now also be set for each card individually. Slight rework of Beam Hash III back end. Improves poolside hash rate by approx 0.2 to 0.3% - displayed hashrate and power consume kept equal. Fixed segmentation fault when the dns resolve of a pool fails. Fixed miner does not restart after connection loss. Applied potential fix for "address or port already in use" bug)


Miners update:
- gminer-v2.41 (Changed default --dag_mode values for polular AMD GPUs. Display valid/stale/invalid shares for Ethash/Etchash and KAWPOW algorithms when solution check on CPU enabled. Display warning when AMD compute mode is disabled)


Miners update:
- t-rex-v0.19.7 (Ethash, octopus, kawpow -  improve stability for 30xx GPUs. Ethash - verify overclock stability after DAG rebuild. Add --gpu-report-interval-s parameter to control hashrate summary report frequency based on the number of share submissions. Watchdog - display a list of GPUs caused miner restart with GPU is idle error. Fixed x21s incorrect size of extranonce2 error. Fixed incorrect GPU index in share submission report when --pci-indexing mode is enabled)


Miners update:
- lolminer-v1.19 (Fixed not mining ETC correctly. Reverted some internal parameters that might cause instability of 1.18. Added automatic tuning mode for --zombie-tune. Ethash stratum connection will now reconnect after three pool rejected shares in a row that did pass own CPU verify before)
- nbminer-nebutech-v36.1 (Octopus Lower power comsumption for 20/30 series Nvidia, improve hashrate 2% on 16 series Nvidia GPU.  Ethash slightly reduce stale ratio. A random crash bug fix, improve overall stability. Add detail datetime & cpu usage in summary log. If Ethash DAG verification failed, display corresponding GPU name in red in summary)
- cryptodredge-v0.26.0 (Add KawPow and Chukwa-v2 algos. Fix MTP issue related to "invalid device symbol". Support NVIDIA Ampere RTX 30XX. Add --temperature-limit and --temperature-start options. Add off flag to Nimiq optimizer --optimizer off. Avoid c-ares dependency on libnsl. Remove no longer supported algorithms. Version 0.26.0 is available only as CUDA 11.2 compatible binary package. SimpleMining will release in few days new image with CUDA 11.2 libraries)


Miners update:
- nanominer-v3.1.5 (Updated AMD Navi GPU Ethash kernels, new performance tuning applied. AMD Radeon VII and Navi GPUs now have temperature, power and fan reported)
- srbminer-multi-v0.6.3 (Added algorithm phi5. Fixed cn/xhv, now it works on coins other than Haven)
- xmrig-v6.7.1 (Fixed log initialization. Added hashrate in the benchmark finished message. AstroBWT OpenCL fixes. RandomX x86 JIT: removed redundant CFROUND)


Miners update:
- phoenixminer-v5.5b (Beta release. Added native kernels for AMD RX 6800/6900 - faster than generic and produce less stale shares. Updated kernels for Polaris/Vega/Navi - faster and less power mining ETH. New kernels require SimpleMining image with 20.10+ drivers. Added support for AMD Linux drivers 20.45 but use this drivers only with AMD RX 6800/6900 (will not work with Vega/Navi !!!). Automatically set -ttli instead of -tmax when later is not supported by the driver - will throttle down the GPUs when they reach the specified temperature to avoid overheating)


Update v1300:
- Added CUDA 11.2 definition
- Added API stats per GPU for CryptoDredge
- Fixed AMD RX 6800 zero fan value reading (need rig restart for activate this fix)


Miners update:
- gminer-v2.42-cuda9.2 (Fixed performance regression for Ethash/Etchash on Nvidia mining cards. Added auto-tune for Ethash/Etchash on Nvidia, auto select fastest kernel, you can select specific kernel manually by using --oc. Added display of shares per minute. Added option to control hashrate --report_interval. Removed cuckarooz29 algorithm)


Miners update:
- bminer-v16.4.5 (Fix compatibility issues with Etherum mining pools)


Miners update:
- xmrig-v6.7.2 (Fixed solo mining)


Miners update:
- teamredminer-v0.8.0 (Ethash: VII kernel rewrite and new C-mode with boost feature. Ethash: Navi kernel slight optimization and new B-mode for lower core clock and power. Ethash: Vega kernel rewrite and new B-mode for lower core clock and power. Ethash: Polaris kernel rewrite and new B-mode for slightly higher perf. Ethash: added share processing timeout and default for Binance pool. Kawpow: now mining ok at MiningPoolHub even though their seedhash is broken. Fan control: added min/max fan speed range. General: added argument to turn off duplicate pci bus id filtering)


Miners update:
- t-rex-v0.19.9 (Add ability to execute custom scripts upon certain events with new parameters: --script-start --script-epoch-change --script-crash --script-low-hash. Ethash, kawpow, octopus: add --dag-build-mode to fine tune DAG build mode. Allow non-existent GPU indices passed in to --devices / -d parameter: miner will display warning message but will continue mining using the GPUs it could find. Improve error descriptions, display block number when mining solo at some pools (2miners). Fixed ethash, kawpow, octopus stability regression for Pascal GPUs. Fixed mining pool difficulty is not always updated in the summary report)

[moderator's note: consecutive posts merged]

[1714078923]

1714078923

[1714078923]

1714078923

[1714078923]

1714078923

[1714078923]

1714078923

[1714078923]

1714078923

[rig4hodlers]

Hello guys, I've been mining ethereum since 2017 and I am still doing that, thanks to simplemining but since I have no time to make a deep research, I have noticed that my 4Gb GPUs are mining now around 20MH/s each GPU. They are Saphire Radeon 4Gb RX570, they were mining 30Mh/s. I have other rigs with 8Gb GPU cards and everything goes well. I am almost 100% sure about it is the 4Gb stuff, the main reason why they are mining 20 Mh/s but I´d like to know if there is any option to bring them back again to the 30 Mh/s. Thanks in advance guys and keep the good work coming.

[tytanick]

Hello guys, I've been mining ethereum since 2017 and I am still doing that, thanks to simplemining but since I have no time to make a deep research, I have noticed that my 4Gb GPUs are mining now around 20MH/s each GPU. They are Saphire Radeon 4Gb RX570, they were mining 30Mh/s. I have other rigs with 8Gb GPU cards and everything goes well. I am almost 100% sure about  it is the 4Gb stuff the reason why they are mining now that but I´d like to know if there is any option to bring them back again to the 30 Mh/s. Thanks in advance guys and keep the good work coming.

There is nothing you can do about hashrate with 4gb cards and ethereum.
This is due to fact that dag size in eth exceeds 4gb file and it is no longer fully loaded into card. Therefore gpu hashes slower and slower every new dag(every 4 days).

At some point you could switch your gpu to etc as etc had hardfork which allows 4gb cards to hash with full speed but it is much less profitable so you need to make calculations. Beside that there is possibility to mine raven.
Please do every few days calculations using whattomine.com to see when it will be profitable to switch from eth to something else on those 4gb cards.

[rig4hodlers]

Hello guys, I've been mining ethereum since 2017 and I am still doing that, thanks to simplemining but since I have no time to make a deep research, I have noticed that my 4Gb GPUs are mining now around 20MH/s each GPU. They are Saphire Radeon 4Gb RX570, they were mining 30Mh/s. I have other rigs with 8Gb GPU cards and everything goes well. I am almost 100% sure about  it is the 4Gb stuff the reason why they are mining now that but I´d like to know if there is any option to bring them back again to the 30 Mh/s. Thanks in advance guys and keep the good work coming.

There is nothing you can do about hashrate with 4gb cards and ethereum.
This is due to fact that dag size in eth exceeds 4gb file and it is no longer fully loaded into card. Therefore gpu hashes slower and slower every new dag(every 4 days).

At some point you could switch your gpu to etc as etc had hardfork which allows 4gb cards to hash with full speed but it is much less profitable so you need to make calculations. Beside that there is possibility to mine raven.
Please do every few days calculations using whattomine.com to see when it will be profitable to switch from eth to something else on those 4gb cards.

Ok, thanks for the quick response. I supposed that but since it is only one rig with this issue, I didn't pay much attention on it. I am gonna calculate what you said on whattomine.com, thanks for the tips and I´ll check 'raven' coin, I didnt know anything about them. 

[tymeksm]

Miners update:
- lolminer-v1.20 (Significantly improved Ethash mining speed on R9 390 and Etchash speed on R9 290. Added new split & dual mining options. Fixed bug with 4G cards crash on mining ETC when trying to falsely enter zombie-tune. Fixed R9 380 cards not start mining Beam. Fixed "Address already in use" bug)


Miners update:
- phoenixminer-v5.5c-rc (Next release candidate version. New -mcdag parameter to reset the memory overclock on Nvidia cards during DAG generation. This may allow you to set higher memory overclock on your Nvidia cards without risking corrupt DAG buffer, which can lead to excessive number of incorrect shares. Use -mcdag 1 (by default the value is 0, which means turned off) to use this new feature. The -tt parameter is now strictly for controlling the fan behavior. New -hwm parameter that allows controlling the frequency of the hardware monitoring, which was also done by -tt in the previous versions of PhoenixMiner. Other small improvements and fixes)


Update v1301:
- Improved GPU memory temperature handling in fancontrol, especially for Vega/Navi GPUs
- Fixed console not updated in first minute rig startup under some conditions
- Updated GPU stats with AMD RX 6900 XT definition

[moderator's note: consecutive posts merged]

[alucard20724]

Miners update:
- teamredminer-v0.8.0 (Ethash: VII kernel rewrite and new C-mode with boost feature. Ethash: Navi kernel slight optimization and new B-mode for lower core clock and power. Ethash: Vega kernel rewrite and new B-mode for lower core clock and power. Ethash: Polaris kernel rewrite and new B-mode for slightly higher perf. Ethash: added share processing timeout and default for Binance pool. Kawpow: now mining ok at MiningPoolHub even though their seedhash is broken. Fan control: added min/max fan speed range. General: added argument to turn off duplicate pci bus id filtering)

will you be implementing "a driver that allows large allocations" for trm 0.8.0 so that eth can be run in B mode on navi cards?

thanks

[BogdanCo]

Miners update:
- teamredminer-v0.8.0 (Ethash: VII kernel rewrite and new C-mode with boost feature. Ethash: Navi kernel slight optimization and new B-mode for lower core clock and power. Ethash: Vega kernel rewrite and new B-mode for lower core clock and power. Ethash: Polaris kernel rewrite and new B-mode for slightly higher perf. Ethash: added share processing timeout and default for Binance pool. Kawpow: now mining ok at MiningPoolHub even though their seedhash is broken. Fan control: added min/max fan speed range. General: added argument to turn off duplicate pci bus id filtering)

will you be implementing "a driver that allows large allocations" for trm 0.8.0 so that eth can be run in B mode on navi cards?

thanks

Flash your USB sticks or SSD with the latest image containing amd 20.30 drivers and Navi cards will run in B mode.

[tymeksm]

Miners update:
- xmrig-v6.8.0 (Added information about memory modules on the miner startup and for online benchmark. New command line option --no-dmi. Improved MSR subsystem code quality. RandomX JIT x86: removed unnecessary instructions)


Miners update:
- gminer-v2.43 (Improved compatibility with Ethash pools (shardpool.io). Improved handling of device freezing. Improved auto-tuning. Added two kernels for Ethash, miner support 5 kernels for Nvidia GPUs, miner automatically select optimal kernel, also you can select specific kernel by --oc parameter)


Miners update:
- gminer-v2.44 (Fixed compatibility issues with ezil.me pool when no rig name passed - bug appeared in v2.43)


Update v1302:
- Fixed all AMD Navi21 GPUs identification (6800/6800XT/6900XT)
- Improved fan control for AMD GPUs

[moderator's note: consecutive posts merged]

[percy_tc]

Does anyone know how Fan control work for RTX 3070?

Are there any command? Sliders does not work.

[miningthusiast]

This is pretty cool, thinking to use this OS for my first rig.

Does this provide better/same hashrate as Win10, but without all the Windows system adjustments you need to make?

[percy_tc]

Does anyone know how Fan control work for RTX 3070?

Are there any command? Sliders does not work.

Okay, case solved. If someone run into the same problem. Mixed rigs are not supported, mixed rigs does not mean amd and nvidia in the same rig, it means different GPU's are not supported: 3070 with 2060 etc.

I had 3070 and 2060 super in same rig, fan control does not work, if i removed 2060 super, fan control works as a charm.

This is pretty cool, thinking to use this OS for my first rig.

Does this provide better/same hashrate as Win10, but without all the Windows system adjustments you need to make?

It will provide about the same hashrate, however i do find nvidia to tweakable better with MSI afterburner, becuase of voltage lock. With amd 5600XT you get all controls included voltage. Be aware that mixed rigs are not supported.

[moderator's note: consecutive posts merged]

[BogdanCo]

Does anyone know how Fan control work for RTX 3070?

Are there any command? Sliders does not work.

Okay, case solved. If someone run into the same problem. Mixed rigs are not supported, mixed rigs does not mean amd and nvidia in the same rig, it means different GPU's are not supported: 3070 with 2060 etc.

I had 3070 and 2060 super in same rig, fan control does not work, if i removed 2060 super, fan control works as a charm.

I have the same issue with 3070 mixed with 1080ti...

[tymeksm]

Miners update:
- srbminer-multi-v0.6.4 (Added algorithm autolykos2 (Ergo) with fee 1.25%. Removed devfee for cryptonight_heavyx. Bug fixes)


Miners update:
- xmrig-v6.8.1 (Fixed AMD GPUs health data readings. Added support for flexible huge page sizes)


New SimpleMining image:
SM-5.4.52-10-a20.30-Radeon-VII
Image ONLY! for AMD Radeon VII with boost up to 105 MH/s support
Image is available only in "Advanced commands"

This is special version of image modified only for AMD Radeon VII boost up to 105 MH/s with 210W power using TeamRedMiner
Image has enabled grub options: amdgpu.vm_block_size=10 amdgpu.vm_size=1024 and this is not recomended fo use with other GPUs because of lower hashare possibility.

Short set up procedure

Group config:
- Select miner: TeamRedMiner v0.8.0 or higher
- Miner OPTIONS: add --eth_config=C option
- Run as root: enabled

OC settings:
- Core MHz / Memory MHz / Core undervolt:
1600 / 900 / 1000 (gives in our tests 96.00 MH/s)
1700 / 1000 / 950 (gives in our tests 105.70 MH/s)
- Advanced tools: enabled
- Advanced tools options:
for Hynix video memory: amdmemorytweak --i XXX --ref 7500 --rtp 6 --rrds 3 --faw 12 --ras 19 --rc 30 --rcdrd 11 --rp 11
for Samsung video memory: amdmemorytweak --i XXX --ref 7500 --faw 15 --rcdrd 13 --rp 13 --rrds 3 --rc 38 --ras 25
(where "XXX" is GPU number 0 or 1 or 2 or 0,1,2,3 for each one)


Miners update:
- teamredminer-v0.8.1 (Big Navi support added (RX 6800/6900) - basic support release for all supported Navi algos (ethash, kawpow, mtp, nimiq). Kernels close to or identical with Navi10 A-mode (ethash) and default modes for Navi10 (kawpow, mtp, nimiq).Big Navi should run in A-mode for ethash (default choice), not B-mode. Eth+zil mining: new pool strategy 'min_epoch' added for switching between plain eth and eth+zil pools. Ethash: Navi display gpus now using A-mode by default to prevent allocation issues. Navi gpus without a monitor attached will continue to default to B-mode. Statistics: now proper handling of negative temperatures)


Miners update:
- verthashminer-v0.6.2 (New miner for verthash mining on AMD and NVIDIA GPUs. Required newest SimpleMining image to work this miner. Miners start very slow because of generatig data file each time - be pacient. API stats will be available in nearest future)


Miners update:
- lolminer-v1.21 (Slightly improved performance zombie mode on Polaris on medium tune stages. Increased range of accepted zombie tune parameter for GPUs with high interconnect bandwidth. Slightly decreased GPU load of Polaris during DAG build. Added more control about handling cards that are detected to be non-working any more. Use parameter --watchdog off/exit/script to turn off any action, exit the miner with a specific exit code or to run an external script (Default is SimpleMining is use external script that reboot rig in case of any miner error). Nvidia cards that experienced a OpenCL driver error (e.g. "CL_OUT_OF_RESOURCES" will now also trigger the watchdog with the configured effect. --ethstratum parameter can now take two options separated by a ',' to give different options in case the dual or split mining mode is used. The dns resolving and the connection attempt can now timeout (after 10 seconds each) and will re-try to connect afterwards. Each timeout event contributes to the counter that will trigger switching to fail-over pools. New option --apihost (default 0.0.0.0) which controls to which host address the api binds. Use 127.0.0.1 to restrict api access to only your computer, 0.0.0.0 is equivalent to everyone can access. Fixed issue that might cause rig drop to 0 hash rate on epoch changes - including changes with activated ZIL caching. Fixed the pool hash rate reporting not working correctly in dual & split stratum modes. Fixed the dual stratum connection not picking up the correct worker name when --worker is used)


Miners update:
- lolminer-v1.22 (Significantly improved the performance of zombie mode on RX 400 and RX 500 GPUs, especially for low zombie tune values between 0 and 4 and rather high epochs. Performance increases by 7-11% on epoch 393 (--4g-alloc-size 4080 on a RX 580. 4G) and 15-20% on epoch 400. Re-tuning using the auto-tune is recommended. Also this version might draw a bit more power, but with approximately same total efficiency)
- srbminer-multi-v0.6.5 (Huge performance increase on autolykos2 algo up to ~600%)


[moderator's note: consecutive posts merged]

[penderway]

Hello all. Started mining (as hobby) again after 2 years and enjoying the updated GUI.

Is there any way to see the motherboard temperature? As in from RigList or Shellinabox?

[tymeksm]

Miners update:
- nanominer-v3.2.0 (Added Autolykos algorithm support for Ergo coin. Fee is 5%. Needs at least 3 GB GPU)


Miners update:
- t-rex-v0.19.10 (Add --script-exit parameter to execute a script upon miner exit. Fixed some user scripts specified in --script-start, --script-epoch-change etc. that fail to execute. Fixed ethash GPU is idle error when generating DAG. Fixed miner fails to start on some linux distros with TREX: ... error)



Miners update:
- srbminer-multi-v0.6.6 (Autolykos2: performance increase, reduced power consumption, faster dataset creation, fixed miner crashing when creating dataset, fixed miner crashing when running --gpu-auto-tune, possible fix for duplicate share. Fixed k12 algorithm. Minor bug fixes)
- lolminer-v1.23 (Reduced the amount of needed host memory when running many cards in zombie mode. Will resolve issues when there is a high number of card. If 1.22 works good for you, but 1.23 is unstable stay at 1.22. Slightly improve zombie mode performance on future epochs above 387)


Miners update:
- nanominer-v3.2.1 (Autolykos performance improvements for AMD, 1-5% depending on GPU)
- sgminer-fancyIX-v0.7.3 (Added Navi support for neoscrypt_navi, neoscrypt-xaya_navi, ethash_navi, lyra2Z_navi, allium_navi, phi2_navi. To run with Navi cards, use suffix _navi to algo, such as -k neoscrypt_navi or -k ethash_navi)


Miners update:
- t-rex-v0.19.11 (Bind API servers to 127.0.0.1 by default to prevent unauthorised access to the API)


Miners update:
- lolminer-v1.24a (Fixed a bug, that often caused the amdgpu driver to report a VM_CONTEXT1_PROTECTION_FAULT_STATUS on startup and possible caused rig reboot. Fixed defect shares and wrong reported has hrate when started with fixed --zombie-tune parameters directly)


Miners update:
- srbminer-multi-v0.6.7 (Performance increase on autolykos2. Devfee increased on autolykos2 to 2%. Ethash - added 1 or 2 buffer mode for DAG (--gpu-ethash-mode). Minor bug fixes)


Update v1303:
- Added parser for verthashminer (only summary hashrate)
- Fixed srbminer API
- Improved NVIDIA fancontrol for 3xxx series
- Fixed VRAM vendor stats reading for AMD Vega+ GPUs

[moderator's note: consecutive posts merged]

[cryptdigger]

if 1 have 6 rx6800xt what is he best smos firmware i should use?
can anyone help?

[tymeksm]

Update v1304:
- Fixed missing RAM size
- Fixed missing dmesg crash console


SimpleMining images update:
- SM-5.4.98-1-a20.30-n460.39-v1304, SM-5.4.98-1-a20.40-n460.39-v1304, SM-5.4.98-1-a20.30-Radeon-VII-v1304
- Updated images with Intel 2.5Gbps network card adapters support.
- First image for almost all GPUs, second one for AMD RX 6xxx series (as in previous update)
- Third one image is available only via advanced commands in dashboard and is optimized only for Radeon VII GPUs.

[moderator's note: consecutive posts merged]

[philipma1957]

I will need to check latest  software thanks.

[tymeksm]

Miners update:
- miniz-v1.7x3 (Improved stale shares for all algos. Added support for Ravencoin (RVN), Zelantus (ZELS), Super Zero (SERO),  Zano (ZANO),  Veil (VEIL),  Veriblock (VBK) with fee 1%. Added support for ethash ETH/ETC (beta) with fee 0.75%. Fixed 192,7 mining.  Minor improvements for 210,9 and 96,5. Removed support for 150,5,3. Improved overall stability. --smart-pers enabled by default. miniZ will adjust the pers string as needed. Fixed hashrate reporting for 96,5. Added --coolui option for alternative interface. Added --quit-disconnect to force the miner to quit when the connection drops (or when quit file is detected))
- xmrig-v6.9.0 (Added pause-on-active config option and --pause-on-active=N command line option. Added support for Tari merge mining. Fixed crash when GPU mining cn-heavy on Zen3 system)


Update v1305:
- Small fix with first run rig and error message on screen during some conditions
- New watchdog detecting read-only filesystem due to filesystem or hard drive issue
- Fixed file permission error message of system console
- Added error msg in console if rig has not IP address
- Fixed hard drive info on some systems


Miners update:
- gminer-v2.45 (Improved Ethash performance for AMD/NVIDUA. Improved performance on KAWPOW for NVIDIA. Decreased stale shares on Nvidia for Ethash and KAWPOW. Removed kernel and added 2 energy efficiency kernels on Ethash for Nvidia. Improved kernel auto-tuning, auto-tuning takes into account energy efficiency of kernels. Optimized NVML polls to decrease memory leaks caused by recent Nvidia drivers (use --pec 0 to exclude memory leaks completely))


Miners update:
- verthashminer-v0.7.0 (Fixed crash when receiving first stratum job. Miner will now instantly switch stratum jobs(on mining.notify). Removed PCIe bus ID configuration file format(due to being not reliable). Raw device list is now default configuration file format(as --gen-conf(-g))  and --gen-conf-raw(-G) option has been removed. A full PCIe ID (bus:device:function) will now be displayed in the device list. Added a new feature "Adaptive batch size" (WorkSize = 0). (It is now used as default, instead of hardcoded 131072 WorkSize). Added 2 new options "BatchTimeMs" and "OccupancyPct" to control "Adaptive batch size".  (Increase "BatchTimeMs" if you have any performance regressions compared to v0.6.2. More inside README). Added support for AMD GPU monitoring through SysFs backend. Added support for NVIDIA GPU monitoring through NVML backend. Added new option GPUTemperatureLimit when GPU Monitoring is available. Automatically transfer NVIDIA SM3.0 devices to the OpenCL backend if the miner was compiled with CUDA 11 or later. Added extra config validation layers for device settings inside the configuration file and command line.Misc fixes and code refactoring)


Miners update:
- srbminer-multi-v0.6.8 (Performance increase on autolykos2 on Vega ~6-9%. Performance increase on autolykos2 on rest GPUs ~3-5%. Added abort mechanism for autolykos2 dataset creation)


SimpleMining images update:
- SM-5.4.98-1-a20.30-n460.56-v1305 (Updated NVIDIA driver with 3060 support)


SimpleMining images update:
- SM-5.4.98-1-a20.40-n460.56-v1305 (One image for all supported GPUs: AMD RX 370 / 380 / 390 / 470 / 480 / 550 / 560 / 570 / 580 / 590 / Vega / Radeon VII / RX 5500 / 5600 / 5700 / 6800 / 6900, NVIDIA 1050 / 1060 / 1070 / 1080 / P102 / P104 / P106 / 1650 / 1660 / 2060 / 2070 / 2080 / 3060 / 3070 / 3080 / 3090)


SimpleMining images update:
- Revert back with official SimpleMining image SM-5.4.98-1-a20.30-n460.56-v1305 to previous ones because of problems with booting under some conditions. We are working on a bug fix and will back to new one image when done.


Miners update:
- srbminer-multi-v0.6.9 (Added algorithm verthash, fee 1.25%. Performance increase on autolykos2 algorithm ~1-6%. Reduced power consumption on autolykos2 algorithm on Vega GPUs. Minor bug fixes)


Miners update:
- gminer-v2.46 (Added memory tweaks for Nvidia GPUs with GDDR5X and GDDR5 memory, requires admin privileges (--mt 1-6). Improved --api parameter, now you can bind ip address (--api [address][port] or --api [port]). Added option to control watchdog restart delay (--watchdog_restart_delay). Optimized memory usage while generating DAG (will able to run miner on 13 GPUs+ rigs with 4GB memory and without swap). Improved kernel auto-tuning)


[moderator's note: consecutive posts merged]

[philipma1957]

my new 6800xt is mine 0 hash rate
I have a 1 card rig with


5.4.98-sm1 / amd20.40r5.6.31 / v1305

some help please

using phoenix 5.4c


-eres 4 -pool daggerhashimoto.usa.nicehash.com:3353 -wal BTC addy -pass x -proto 4 -rmode 2 -stales 0