Unable to access AntMiner

[allit]

We accidentally changed the LAN IP to static and we should have changed the WAN IP to make the AntMiner have a static IP within our network.

Now we cannot access the AntMiner. 

Any help would be greatly appreciated.

L

[1714786936]

1714786936

[1714786936]

1714786936

[HagssFIN]

I don't know which Antminer you are talking about, but see the manual for resetting the miner by using the reset button.

See Antminer S7 manual for example: https://bitmaintech.com/files/download/Antminer%20S7%20user%20guide.pdf
Chapter 7.4.

Manuals for every Antminer model can be found from Bitmain's site:
https://bitmaintech.com/support.htm

[allit]

AntMiner S3+

[gt_addict]

Reset button on the front will set it back to standard settings and standard IP address (192.168.1.99 I think). The ln you can start the setup again.

[HagssFIN]

See the location for Antminer S3's reset button from the picture below.
You will need a small item: paper clip or a needle for example to press it.


The following quote is from dogie's setup thread https://bitcointalk.org/index.php?topic=702653.0

How do I reset settings to default?

- Use a paper clip to press the reset button - located next to the ethernet connector - down for
5-10 seconds. The miner will then reset with stock settings.

[unholycactus]

Should be 192.168.1.99 after a reset like other people mentioned.
You can also access your router to see what's connected to it and get the dynamic IP your miner is currently connected to.