[ANN] Firo (FIRO) - Implementing ZKP privacy without trusted setup

[TRILIUNER MUDA]

Hi, how much is the total supply of the coin?

just visit this page = https://coinmarketcap.com/currencies/zcoin
all information in their site

[elpivesabe]

Hi, how much is the total supply of the coin?

just visit this page = https://coinmarketcap.com/currencies/zcoin
all information in their site

I only can see the circulating supply in coinmarketcap, I didn't find any information about the total supply cap in their website either.

[sl0tmachine]

21 million coins.

[ZenFr]

Hi, how much is the total supply of the coin?

just visit this page = https://coinmarketcap.com/currencies/zcoin
all information in their site

I only can see the circulating supply in coinmarketcap, I didn't find any information about the total supply cap in their website either.

XZCoin is mineable altcoin.
XZCoin is a very low inflation altcoin.
Then, total supply and circulating supply are the same : approximatively 3,000,000 XZC. It is a very low supply and a good opportunity for investment.

[sl0tmachine]

There will be 21 million Zcoins. Zcoin follows the same halving cycle as Bitcoin (every 4 years). 10% of the total Zcoin supply will be distributed to the Founders Reward as time passes.

[krazyx]

Lots of good news, well done guys !
Price is going up and hopefully we will see back at 0.005 soon.

Around 1000 BTC volume on Bittrex in the last 24hours !

[crybo]

Hi All,

I'm testing my machine for mining XZC coin using ccminer v0.0.3 forked by djm34.

my machine is Linux Ubuntu 16.04.3 LTS. GPU card I tested for compiling ccminer is NVIDIA Quadro 2000 with CUDA 8 driver.

First, I didn't found build.sh file in the tarball file. But since I'm quite familiar with compiling source, I did by using configure and make

another ccminer are work in this machine, I did test XMR ccminer and it works. but this ccminer for ZXC returns errors like this

Code:

[2017-09-21 03:49:16] Starting on stratum+tcp://asia.lyra2z-hub.miningpoolhub.com:20581
[2017-09-21 03:49:16] 1 miner thread started, using 'lyra2Z' algorithm.
[2017-09-21 03:49:23] Stratum difficulty set to 10 (0.03906)
[2017-09-21 03:49:23] GPU #0: Intensity set to 16, 65536 cuda threads
[2017-09-21 03:49:24] GPU #0: Quadro 2000, 60.04 MH/s
[2017-09-21 03:49:24] GPU #0: invalid device function
[2017-09-21 03:49:25] GPU #0: invalid device function
[2017-09-21 03:49:25] GPU #0: invalid device function
[2017-09-21 03:49:27] GPU #0: invalid device function
[2017-09-21 03:49:29] GPU #0: Quadro 2000, 2090.72 MH/s
[2017-09-21 03:49:29] GPU #0: invalid device function
[2017-09-21 03:49:31] GPU #0: invalid device function
[2017-09-21 03:49:33] GPU #0: Quadro 2000, 2298.32 MH/s
[2017-09-21 03:49:33] GPU #0: invalid device function
[2017-09-21 03:49:35] GPU #0: invalid device function
[2017-09-21 03:49:37] GPU #0: Quadro 2000, 2106.16 MH/s
[2017-09-21 03:49:37] GPU #0: invalid device function
[2017-09-21 03:49:39] GPU #0: invalid device function
[2017-09-21 03:49:41] GPU #0: Quadro 2000, 2065.46 MH/s
[2017-09-21 03:49:41] GPU #0: invalid device function
[2017-09-21 03:49:43] GPU #0: invalid device function
[2017-09-21 03:49:45] GPU #0: Quadro 2000, 2172.89 MH/s
[2017-09-21 03:49:45] GPU #0: invalid device function

anyone found same issue? or any advice to solve this issue?

thanks in advance

[SACofTrees916]

is the slack group closed? i tried to get invited and received this massage: Failed! token_revoked

Was wondering the same thing. Tried to check it out yesterday.

[CjMapope]

Hi All,

I'm testing my machine for mining XZC coin using ccminer v0.0.3 forked by djm34.

my machine is Linux Ubuntu 16.04.3 LTS. GPU card I tested for compiling ccminer is NVIDIA Quadro 2000 with CUDA 8 driver.

First, I didn't found build.sh file in the tarball file. But since I'm quite familiar with compiling source, I did by using configure and make

another ccminer are work in this machine, I did test XMR ccminer and it works. but this ccminer for ZXC returns errors like this

.......

thanks in advance

have you checked to see if that version supports your compute? might be the issue. i assume your talking about https://github.com/djm34/ccminer-msvc2015/releases? what quadro 2000? P? K? or just the normal Quadro 2000? haha
Check your compute version for compatibility i would say (if lower intensity didnt help),  good luck!

[timnguyen]

hi guys, what u guys get on the 1060 6G nvidia? 

I am using ccminer 2.2 and get 1050 kh for 1 card. is that normal?

Can someone tell me the recommended oc setting?

Thanks.

[Maymun_lavigne]

From $ 6,7 to $ 10,8 less than a week , a very interesting fluctuation.
let alone there is a choice of pair using the Indonesian currency ( Rupiah ) , makes it easy for new learners trading with FIAT.
I will try to keep some coins in a long time, just like ETH development.

[elpivesabe]

There will be 21 million Zcoins. Zcoin follows the same halving cycle as Bitcoin (every 4 years). 10% of the total Zcoin supply will be distributed to the Founders Reward as time passes.

Does it mean that it is a high inflationary coin for now? Because the circulating supply is only 3 millions, far from the 21 millions of total supply.

[Jazek]

hi guys, what u guys get on the 1060 6G nvidia? 

I am using ccminer 2.2 and get 1050 kh for 1 card. is that normal?

Can someone tell me the recommended oc setting?

Thanks.

with my gtx 970 i get 1030 kH/s and i have +200 Core -501 Mem

[webtimmi]

hi guys, what u guys get on the 1060 6G nvidia? 

I am using ccminer 2.2 and get 1050 kh for 1 card. is that normal?

Can someone tell me the recommended oc setting?

Thanks.

with my gtx 970 i get 1030 kH/s and i have +200 Core -501 Mem

hi guis. I have 6 cards of 1060 6G of the NVIDIA. in the miner shows 6100 kh/s. but on the miningpoolhub shows that I have about 3500 kh/s. what could be the problem?

[cyberspacemonkey]

hi guys, what u guys get on the 1060 6G nvidia? 

I am using ccminer 2.2 and get 1050 kh for 1 card. is that normal?

Can someone tell me the recommended oc setting?

Thanks.

with my gtx 970 i get 1030 kH/s and i have +200 Core -501 Mem

hi guis. I have 6 cards of 1060 6G of the NVIDIA. in the miner shows 6100 kh/s. but on the miningpoolhub shows that I have about 3500 kh/s. what could be the problem?

That is normal because your hashrate information fluctuates on the pool based on an average of all the valid shares that you are submitting.

[Jazek]

hi guys, what u guys get on the 1060 6G nvidia? 

I am using ccminer 2.2 and get 1050 kh for 1 card. is that normal?

Can someone tell me the recommended oc setting?

Thanks.

with my gtx 970 i get 1030 kH/s and i have +200 Core -501 Mem

hi guis. I have 6 cards of 1060 6G of the NVIDIA. in the miner shows 6100 kh/s. but on the miningpoolhub shows that I have about 3500 kh/s. what could be the problem?

Im mining in suprnova because the hashrate doesnt fluctuate so much.

[Moonshots]

HI, could anyone tell me the minimum xzc necessary for creating a znode (masternode)? Also, what is the purpose of this special nodes on this coin? Thanks

[elsystem]

Only 0.76769030 for last 24 hours with 9300kh/s
maybe mph problem ? on suprnova was 1.6 before 2 days.

Do you mind sharing your rig setup? Details of the GPUs, CPUs? Thanks

[m1sh0k]

Only 0.76769030 for last 24 hours with 9300kh/s
maybe mph problem ? on suprnova was 1.6 before 2 days.

Do you mind sharing your rig setup? Details of the GPUs, CPUs? Thanks

3x1080ti 2025@950mV (cards are stable only in zcoin on this settings)

[biggee]

Hey guys,

Is there anybody out there that has managed to get sgminer working on XZC with AMD RX* cards?

The latest djm34 release complains about missing dll files then crashes.

The previous version looks like it's all going to work then crashes and closes down.

I can't even get the supplied test.bat to run.

Win 10 / Latest AMD drivers (blockchain release) / 6 x RX480 / 470 mixed

Any suggestions or is this a lost cause with AMD cards?