Open Source ZEC (ZCash) GPU Miner AMD & NVidia (up to 45 sol/s on RX480)

[mikegi]

Thank you for your really good answers and advise mikegi!

As the wallet containing the z-address I mined to does not contain coins, I don't have to transfer anything before I can send the .dat file.
I'll go ahead and follow those steps:
- make a new wallet on a VM and generate a t-address
- send the old wallet and the new t-address to eXtremal
- backup the old wallet just in case, even if it's very unlikely any coins end up in it

Dikyx

Yep, sounds right.

Happy, that you appreciate my answer. It feels good to be able to write something helpful.

Myself, I had produced shares worth about 0.00001 to a z address while figuring out how compile and run get the miner working... Switched to the t address early enough. It might have almost been worth a coffee at a gas station if I started mining on the the first day and sold for 200 BTC/Zcash. :-)

[1713264778]

1713264778

[1713264778]

1713264778

[1713264778]

1713264778

[1713264778]

1713264778

[1713264778]

1713264778

[paagrio]

AMD is shit for equihash, trully, it doesn't have shared memory and that is why NVIDIA owns:

https://cdn-enterprise.discourse.org/zcash/uploads/default/original/2X/7/772a33c7d30d4489ec9d35589ce079f88a6d8c51.png

Except I have ~70H/s on my RX480

http://i.piccy.info/i9/1727893fc4339941ab16debdbe82f658/1478800134/35449/1088389/RX480.png

[Amph]

AMD is shit for equihash, trully, it doesn't have shared memory and that is why NVIDIA owns:

what miner is that, the one that work on linux only?

ah i get it, this is the new version fo the nicehash miner, 66 sol on a 1070

AMD is shit for equihash, trully, it doesn't have shared memory and that is why NVIDIA owns:

Except I have ~70H/s on my RX480

real nvidia potential is at least 134 sol on a 1070, just look at the djm miner, which is private

[paagrio]

Best AMD mining card for zcash is R9 390X. It can mine 100 sol/s

[gary_aut]

Why you dont realize a zcash Solo Mining Pool like solorider.io

There is only one now and you are trusted

cg

Gary

[ayiphelmy]

it's already slowly die.... dumper is everywhere....

[adamvp]

I am looking for improved miner.
Am I right that eXtremal works now can be found in Silentarmy topic?

[Penguen]

 i have a problem v5. My pc close 3 min later. Again restart. I have a 3gb ram ; is it problem this?

[Dikyx]

Hi eXtremal,

I sent you a payment request by email containing all the required information.

http://coinsforall.io/#!/coin/ZCASH/wallet/zcPE7HSDd5xJnM2DnzMVj4Dt216KxXZCDGCFRDNLG9oBo5kzLGqkfktj1owrobLqQ3vVmAuVscEUFUYKC6JhLtn9UkQ1Jk7

Now the balance shows 0 ZCASH and no transactions are listed.

Can you please check it out? The balance was 0.00724922 ZCASH and I didn't receive anything on the t-address provided in the email.

Thank you !

Dikyx

[eXtremal]

Hi eXtremal,

I sent you a payment request by email containing all the required information.

http://coinsforall.io/#!/coin/ZCASH/wallet/zcPE7HSDd5xJnM2DnzMVj4Dt216KxXZCDGCFRDNLG9oBo5kzLGqkfktj1owrobLqQ3vVmAuVscEUFUYKC6JhLtn9UkQ1Jk7

Now the balance shows 0 ZCASH and no transactions are listed.

Can you please check it out? The balance was 0.00724922 ZCASH and I didn't receive anything on the t-address provided in the email.

Thank you !

Dikyx

You are not right, see https://explorer.zcha.in/transactions/805e5d3d2c1edb767a1f7521322aba05c625c6ef598a6326c48200a1c0570695 and time of this transaction.

[Dikyx]

You are not right, see https://explorer.zcha.in/transactions/805e5d3d2c1edb767a1f7521322aba05c625c6ef598a6326c48200a1c0570695 and time of this transaction.

Thank you for your quick answer.

I can see the transaction on explorer.zcha.in but I'm still getting 0 as result when running the zcash-cli z_getbalance "t1eaFFkyGz7mPXU8Y1AMAWs4mizn5D97xJP" command.

./src/zcash-cli listtransactions and ./src/zcash-cli listunspent return [] too.

Weird, I found this:

https://github.com/zcash/zcash/issues/1792

Hi, I am mining ZCash and I got some ZCash already, if I check my balance on-line with my T-Address I see some balance but when I run ./src/zcash-cli z_getbalance "$TADDR" the balance return is always 0.
I followed the guide and I am not using it to mine, just to have a Wallet. Is it a bug? Or I am doing something wrong? Thanks.

Today the command worked. I think I know why. The ZCash needs a balance of at least 0.1ZCash to show up. That is my guess.

Maybe he's right. Anyway, thank you for sending the ZEC!

[faddat]

We are trying to get this running on ARM MALI.  I have also failed with the OpenCL stuff for nheqminer.  Anyone have insights? 

[megacrypto]

eXtremal .... great work and super super super thanks for putting the pool source out there ))))

i have a couple of questions:

i keep getting this in the pool cli:

Code:

<error> getBalance call failed

other than that ..... dont know how to say thank you  !!!!! .... definitely one of the people that will support with my first coins !!!

and looking at the restapi cli i keep getting this:

Code:

<error> can't read message size, exiting..
<error> can't read message size, exiting..
<error> queryFoundBlocks call failed
<error> queryPoolStats call failed
<error> can't read message size, exiting..
<error> can't read message size, exiting..
<error> queryFoundBlocks call failed
<error> queryPoolStats call failed
<error> can't read message size, exiting..
<error> can't read message size, exiting..
<error> queryFoundBlocks call failed
<error> queryPoolStats call failed
<error> can't read message size, exiting..
<error> can't read message size, exiting..
<error> queryFoundBlocks call failed
<error> queryPoolStats call failed

any pointers?

[mmd123]

so, I'm confused here... it states that this thing supports nvidia gpus, and maybe I'm doing something horribly wrong here, I probably am, but when trying to launch the program, I cannot for the life of me get it to do anything other than open and near instantly close right after opening....anyone able to help me understand what I'm doing so horribly wrong here?? latest nvidia drivers and everything. granted, it states it works with the 1070s and I'm using dual 1080s, but I would not think that would murder this from working....would it?

[Bannedseller]

How many H/s people are getting using RX480 8GB please?
Thanks

[blackice2013]

Hi all!
I am trying to setup this pool by myself, but getting problem at this point:

After building by command ./zcutil/build.sh you must apply pool integration patch:

patch -p0 < pool.diff

Add path to pool libraries in Makefile:

--- src/Makefile        2016-11-08 13:36:41.033699973 +0300
+++ src/Makefile        2016-11-08 13:37:20.889665298 +0300
@@ -1380,7 +1380,7 @@
 LIBSNARK_LIBS = -lsnark
 LIBTOOL = $(SHELL) $(top_builddir)/libtool
 LIBTOOL_APP_LDFLAGS =
-LIBZCASH_LIBS = -lsnark -lgmp -lgmpxx -lboost_system-mt -lcrypto -lsodium -fopenmp
+LIBZCASH_LIBS = -lsnark -lgmp -lgmpxx -lboost_system-mt -lcrypto -lsodium -fopenmp -LYOUR_BUILD_DIRECTORY/poolcore/x86_64-Linux/zcash -lpoolrpczcash -LYOUR_BUILD_DIRECTORY/libp2p/x86_64-Linux/p2p -lp2p -LYOUR_BUILD_DIRECTORY/libp2p/x86_64-Linux/asyncio -lasyncio-0.3 -lrt
 LIPO =
 LN_S = ln -s
 LRELEASE =

Build ZCash daemon again:

make -j5


when I change that single line on makefile, and i do make -j5 i get this error:

 make -j5
Making all in src
make[1]: se entra en el directorio '/home/pool/zcash/src'
make[2]: se entra en el directorio '/home/pool/zcash/src'
CXX libbitcoin_server_a-init.o
CXX libbitcoin_server_a-main.o
CXX libbitcoin_server_a-miner.o
CXX libbitcoin_util_a-clientversion.o
AR libbitcoin_server.a
ar: u' modifier ignored sinceD' is the default (see U')
AR libbitcoin_util.a
ar:u' modifier ignored sinceD' is the default (seeU')
CXXLD zcash/GenerateParams
CXXLD zcash-cli
CXXLD zcash-tx
CXXLD zcashd
CXXLD test/test_bitcoin
CXXLD zcash-gtest
libbitcoin_server.a(libbitcoin_server_a-init.o): In function AppInit2(boost::thread_group&, CScheduler&)':
/home/pool/zcash/src/init.cpp:1524: undefined reference topoolRpcThread(void*)'
libbitcoin_server.a(libbitcoin_server_a-main.o): In function ActivateBestChain(CValidationState&, CBlock*)':
/home/pool/zcash/src/main.cpp:2707: undefined reference tonewBlockNotify(void*)'
collect2: error: ld returned 1 exit status
Makefile:3116: fallo en las instrucciones para el objetivo 'zcashd'
make[2]: *** [zcashd] Error 1
make[2]: *** Se espera a que terminen otras tareas....
libbitcoin_server.a(libbitcoin_server_a-main.o): In function ActivateBestChain(CValidationState&, CBlock*)':
/home/pool/zcash/src/main.cpp:2707: undefined reference tonewBlockNotify(void*)'
libbitcoin_server.a(libbitcoin_server_a-init.o): In function AppInit2(boost::thread_group&, CScheduler&)':
/home/pool/zcash/src/init.cpp:1524: undefined reference topoolRpcThread(void*)'
collect2: error: ld returned 1 exit status
Makefile:3102: fallo en las instrucciones para el objetivo 'zcash-gtest'
make[2]: *** [zcash-gtest] Error 1
libbitcoin_server.a(libbitcoin_server_a-main.o): In function ActivateBestChain(CValidationState&, CBlock*)':
/home/pool/zcash/src/main.cpp:2707: undefined reference tonewBlockNotify(void*)'
collect2: error: ld returned 1 exit status
Makefile:3035: fallo en las instrucciones para el objetivo 'test/test_bitcoin'
make[2]: *** [test/test_bitcoin] Error 1
make[2]: se sale del directorio '/home/pool/zcash/src'
Makefile:7457: fallo en las instrucciones para el objetivo 'all-recursive'
make[1]: *** [all-recursive] Error 1
make[1]: se sale del directorio '/home/pool/zcash/src'
Makefile:676: fallo en las instrucciones para el objetivo 'all-recursive'
make: *** [all-recursive] Error 1

Help please!!
Ty

[Kenarix]

How many H/s people are getting using RX480 8GB please?
Thanks

Between 180 to 200.

[mr_aleks]

Can I use this Mining on Maxwell cards? I have gtx 980 (not ti)

[Kenarix]

Can I use this Mining on Maxwell cards? I have gtx 980 (not ti)

Yes.

[aurigae]

BUILD SUCCESS - RUN FAIL

Ubuntu 16.04 - Cuda 8 , nvidia prop driver.

Build & run log - bbuilding works but run fails:

https://hastebin.com/ogejuyiraq.scala

Code:

✘-ABRT ~/xpmclient [master|…102]
00:12 $ ./xpmclient
madPrimeMiner-v1.1
ClientName = 'nebulax'  ClientID = 1962103082  InstanceID = 1983032392
Address = 't1QuKTZZgFYfWJM6XJjY4Mn4qTJKoRuFHgu'
terminate called after throwing an instance of 'config4cpp::ConfigurationException'
Aborted (core dumped)