[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[cbuchner1]

the -i 0 option should be in lower case. Also, consult the spreadsheet linked in first post for possible -l kernel launch parameters. Not sure if we have a GT 430 in there already...

[1713591517]

1713591517

[Lacan82]

[2013-04-26 20:10:35] GPU #0:  with compute capability 716.25

See, it can't even open your GPU. No name indicated and compute capability is bogus.

Try updating your driver. It must be new enough to support CUDA 5.0.

thank you and to all the others, I solved installing latest 314.22 nvidia driver!

now I see

Code:

[2013-04-26 22:10:48] GPU #0: GeForce GT 430, 81408 hashes, 18.13 khash/s

same speed of cgminer but it's ok!

Try it with -I 0 at the end of the launch

that is a -i and not an uppercase.

He might also try using the -l flag also to see how it goes. My 450 has one of -l 40x2 I think.

If you're using any extra flags you should always autotune before using -l because you might actually end up using a lower config.

and my add-on for IE auto corrects

[BrewCrewFan]

[2013-04-26 20:10:35] GPU #0:  with compute capability 716.25

See, it can't even open your GPU. No name indicated and compute capability is bogus.

Try updating your driver. It must be new enough to support CUDA 5.0.

thank you and to all the others, I solved installing latest 314.22 nvidia driver!

now I see

Code:

[2013-04-26 22:10:48] GPU #0: GeForce GT 430, 81408 hashes, 18.13 khash/s

same speed of cgminer but it's ok!

Try it with -I 0 at the end of the launch

that is a -i and not an uppercase.

He might also try using the -l flag also to see how it goes. My 450 has one of -l 40x2 I think.

If you're using any extra flags you should always autotune before using -l because you might actually end up using a lower config.

and my add-on for IE auto corrects

very true at least get a feel for what your card would be set at for that flag. Of course... if set too high you will get a hash rate of 600+ and toss out errors about the CPU or something lol.

[nst6563]

I have a gt430 and it's using -i 0 -C 2 -l 112x2.  Nets about 37kh/s after a little overclocking. 

[zeded]

thank you. it worked great.
i have a gigabyte windforce gtx 570 1.25gb
achieved 200k/s

[beppe]

I have a gt430 and it's using -i 0 -C 2 -l 112x2.  Nets about 37kh/s after a little overclocking. 

thanks! with same parameters i get 20 kh/s, no overclock

[xandriel]

What a great miner
Is there any correlation between the launch configurations and the number of shaders on the gpu?

[statdude]

This is impossible!

Can someone explain how to get this working?

I have a GTX 570.

I've unzipped the cudaminer.

Now what?

[BrewCrewFan]

This is impossible!

Can someone explain how to get this working?

I have a GTX 570.

I've unzipped the cudaminer.

Now what?

have you installed all the other requirements also listed on the first post? For the prethreads I unpacked that also into the folder that I made for cudaminer

[termhn]

This is impossible!

Can someone explain how to get this working?

I have a GTX 570.

I've unzipped the cudaminer.

Now what?

http://teksyndicate.com/forum/litecoin/guide-mining-nvidia-now-guide-mining-feathercoin/137688
If you need more help after that ask.

[statdude]

I'll start with the CPU miner.
I'm getting the following error following his instructions, with my launch.bat saved as follows:

minerd -o http://coinotron.com:3334 -O myuser.worker1:workerpassword

"4 miner threads started, using 'scrypt' algorithm.
HTTP requrest failed: coudln't connect to host
json_rpc_call failed, retry afer 30 seconds."


Appreciate the help. This looks fun.

[termhn]

I'll start with the CPU miner.
I'm getting the following error following his instructions, with my launch.bat saved as follows:

minerd -o http://coinotron.com:3334 -O myuser.worker1:workerpassword

"4 miner threads started, using 'scrypt' algorithm.
HTTP requrest failed: coudln't connect to host
json_rpc_call failed, retry afer 30 seconds."


Appreciate the help. This looks fun.

couldn't connect means you typed in the host address wrong... make sure you have the port and url correct. Also make sure you have myuser.worker1:workerpassword as your actual worker username/password!

[KnowBuddy]

I'll start with the CPU miner.
I'm getting the following error following his instructions, with my launch.bat saved as follows:

minerd -o http://coinotron.com:3334 -O myuser.worker1:workerpassword

"4 miner threads started, using 'scrypt' algorithm.
HTTP requrest failed: coudln't connect to host
json_rpc_call failed, retry afer 30 seconds."


Appreciate the help. This looks fun.

One point:

• Coinotron LTC is Stratum only. You will need to run a stratum proxy program and point your minerd.exe (and your cudaminer.exe when you get to that) to http://170.0.0.1:8332 or http://localhost:8332 (same user/pass info).

This would be my suggestion for the .bat file for your setup on coinotron:
start mining_proxy.exe -pa scrypt -o coinotron.com -p 3334
start cudaminer.exe -i 0 -C 2 -l 30x8 -o http://localhost:8332 -O worker1username:worker1password
start minerd.exe --threads 4 --url http://localhost:8332 --userpass worker2username:worker2password

You will see json_rpc_call failed errors until the mining proxy program is up and running. I suggest running minerd with --threads 3 if you're seeing significantly lower hashrate for your GPU when also running minerd.

[Signus]

Awesome tool. Works quite well.

EVGA NVIDIA GTX 480 is averaging about ~180kH/s without any tuning. I'll do some tuning later and see what I can get.

I'll even try my Linux partition and see how the performance differs.

[cbuchner1]

I've unzipped the cudaminer.
Now what?

have you installed all the other requirements also listed on the first post? For the prethreads I unpacked that also into the folder that I made for cudaminer

Worst advice ever. These are compilation requirements only.

What may be required in some cases is the Visual Studio 2010 Runtime libraries. I did not include them because they would make the download much bigger: http://www.microsoft.com/en-us/download/details.aspx?id=8328

[TiuraZ]

How are you guys getting 120-130 khash/s out of GTX 460? Overclocking? Because mine is only doing around 100 khash/s.

[Waramp22]

Anyone have the link to download cudaminer handy that doesnt require google chrome?

[Schleicher]

Anyone have the link to download cudaminer handy that doesnt require google chrome?

Just click on "no thanks"
Works fine with IE 10

[Waramp22]

I have a fresh install of Windows 7 64 bit.
I dont see the "No Thanks" option anywhere. Im either blind or retarded.

[statdude]

I'll start with the CPU miner.
I'm getting the following error following his instructions, with my launch.bat saved as follows:

minerd -o http://coinotron.com:3334 -O myuser.worker1:workerpassword

"4 miner threads started, using 'scrypt' algorithm.
HTTP requrest failed: coudln't connect to host
json_rpc_call failed, retry afer 30 seconds."


Appreciate the help. This looks fun.

One point:

• Coinotron LTC is Stratum only. You will need to run a stratum proxy program and point your minerd.exe (and your cudaminer.exe when you get to that) to http://170.0.0.1:8332 or http://localhost:8332 (same user/pass info).

This would be my suggestion for the .bat file for your setup on coinotron:
start mining_proxy.exe -pa scrypt -o coinotron.com -p 3334
start cudaminer.exe -i 0 -C 2 -l 30x8 -o http://localhost:8332 -O worker1username:worker1password
start minerd.exe --threads 4 --url http://localhost:8332 --userpass worker2username:worker2password

You will see json_rpc_call failed errors until the mining proxy program is up and running. I suggest running minerd with --threads 3 if you're seeing significantly lower hashrate for your GPU when also running minerd.

Thanks, but I have no idea what Stratum is or want to get into that.

I have been able to get launched on WinCoin for CPU mining. here is my command line (I guessed on # of threads...)

minerd.exe --algo scrypt --s 6 --threads 8 --url http://94.23.199.14:9327/ --

I'm getting like 50 khash/s on a Intel core i-5 2320 @ 3.00 GHZ

What do I put on CudaMiner launch.bat? I was able to launch cgminer like this (didn't change a single setting, don't know what to put.):
cgminer --scrypt -o http://94.23.199.14:9327/ --intensity 10 --worksize 128 -g 1 but only got like 60 Khash a second and it sounded like my video card was going to explode.

I have a Geforce GTX 570. I removed the user/pass parts.

.01 BTC donation to whoever gets me over 150 gpu hash with this pool.
I've found some kind of gdoc but don't know what I'm looking for.

Thanks guys.

https://docs.google.com/spreadsheet/ccc?key=0AjMqJzI7_dCvdG9fZFN1Vjd0WkFOZmtlejltd0JXbmc#gid=2