[ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]

[MexiMelt]

Please, how are you mining? Can you explain the config you're using for cudaminer?

sure:
<snip>

I put that in [...]Roaming\Maxcoin\maxcoin.conf

I started maxcoind.exe without any arguments

then I just ran: cudaminer --algo=keccak -d gtx660 -C 2 -H 2 -L 128 -l K2048x32 -R 5 -o http://127.0.0.1:5252 -O username:password

You're a godsend! Now if I could just get a node to connect. All I'm getting is timeouts and of course, RPC is giving cudaminer 500 internal server errors.

[1713891776]

1713891776

[1713891776]

1713891776

[1713891776]

1713891776

[bathrobehero]

addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25

same...

[DrFingol]

My debug.log is full of these
2014-02-06 21:06:34 Added 1 addresses from 108.166.119.210: 7 tried, 2251 new
2014-02-06 21:06:35 trying connection 50.1.158.87:8668 lastseen=2.1hrs
2014-02-06 21:06:40 connection timeout
2014-02-06 21:06:40 trying connection 87.147.40.27:8668 lastseen=2.7hrs

Cudaminer is reporting ~150.000khash/s, GTx 780 Ti on Windows

[Mav2000]

Please, how are you mining? Can you explain the config you're using for cudaminer?

sure:
<snip>

I put that in [...]Roaming\Maxcoin\maxcoin.conf

I started maxcoind.exe without any arguments

then I just ran: cudaminer --algo=keccak -d gtx660 -C 2 -H 2 -L 128 -l K2048x32 -R 5 -o http://127.0.0.1:5252 -O username:password

You're a godsend! Now if I could just get a node to connect. All I'm getting is timeouts and of course, RPC is giving cudaminer 500 internal server errors.

me too only internal server errors....is this normal?

[9kracing]

When I run Maxcoind.exe, what should I see?

[cbuchner1]

me too only internal server errors....is this normal?

This happened to me after restarting by maxcoind.exe. Somehow it has trouble finding enough
connections to the network.

I have installed the Linux wallet (QT) on a separate machine and this one runs MUCH smoother.

Christian

[sambiohazard]

When I run Maxcoind.exe, what should I see?

You will see nothing but a blinking cursor. run it by opening the console and not by double clicking

[MexiMelt]

me too only internal server errors....is this normal?

This happened to me after restarting by maxcoind.exe. Somehow it has trouble finding enough
connections to the network.

I have installed the Linux wallet (QT) on a separate machine and this one runs MUCH smoother.

Christian

Their twitter just said they're updating the windows client. I've been through a few launches at this point. They're always sloppy but man... this one's a borderline massacre.

[manofcolombia]

I'm getting a ton of connection timeouts but I've also seen a couple connections but then immediately after comes a socket recv error 10054

[aikklond]

People plese help a noob I am getting the message that i have no cuda, do i need to install newest drivers or something more?

[9kracing]

When I run Maxcoind.exe, what should I see?

You will see nothing but a blinking cursor. run it by opening the console and not by double clicking

Ok cool, so then the solution to the internal server error is... to just wait longer?

[mmouse]

C:\Program Files (x86)\coins\Maxcoin>maxcoind.exe -rpcpassword=xxx getmininginfo
{
    "blocks" : 149,
    "currentblocksize" : 0,
    "currentblocktx" : 0,
    "difficulty" : 128.37905466,
    "errors" : "",
    "generate" : false,
    "genproclimit" : -1,
    "hashespersec" : 0,
   "networkhashps" : 12836029626,
   "pooledtx" : 0,
    "testnet" : false
}

12 GH/s aren't CPU only, I'm sure. Seems like this launch goes to the nvidia/cudaminer folks... Too bad I don't have a decent Nvidia GPU myself, but thanks for the entertaining evening anyway

[MexiMelt]

I'm getting a ton of connection timeouts but I've also seen a couple connections but then immediately after comes a socket recv error 10054

Same here. I think cuda manager will be skipping this one. People would need to know how to use command line anyway.

[DrFingol]

FOR ALL WINDOWS USERS:

1. Run Maxcoind.exe. A new directory for maxcoin is created, but only a black command box should be visible. You can close the command box.
2. Search for %appdata% and you will find the directory "roaming". In this directory you will find "MaxCoin" somewhere. Get in there!
3. This is the maxcoin.conf file I use:
# MaxCoin Example Config
# https://en.bitcoin.it/wiki/Running_Bitcoin#Bitcoin.conf_Configuration_File

# Seed nodes
addnode=maxcoin.cloudapp.net
addnode=maxcoinus.cloudapp.net
addnode=maxcoinasia.cloudapp.net
addnode=maxexplorer.cloudapp.net
addnode=213.179.202.19
addnode=91.121.8.25

# Enable RPC
server=1

# RPC information
rpcuser=YOURNAME
rpcpassword=YOURPASS
rpcport=8108
# Mining
gen=0

4. Go to your cudaminer directory. This is the launch.bat file I use for a GTX 780 Ti (replace the last parameters with something that is compatible with your card):
cudaminer.exe --algo=keccak -o http://localhost:8108 -O YOURNAME:YOURPASS -L 128 -l T1000x24

5. I just ran maxcoind.exe and waited for a while, and checked the debug.log file (in the Roaming\MaxCoin directory) for any signs of a connection.

6. If you think you might have a connection, use your launch.bat file to get cudaminer going! Cross your fingers.

[cbuchner1]

the Windows wallet is a bitch.

But mining to my Linux wallet with around 700 MHash/s is going smoothly. Found 2 blocks way after the launch. So solo'ing is feasible.

Christian

[Mitchell]

When I run Maxcoind.exe, what should I see?

You will see nothing but a blinking cursor. run it by opening the console and not by double clicking

Ok cool, so then the solution to the internal server error is... to just wait longer?

Yes. The RPC server wont work until there are enough connections

[cbuchner1]

C:\Program Files (x86)\coins\Maxcoin>maxcoind.exe -rpcpassword=xxx getmininginfo
   "networkhashps" : 12836029626,
}

12 GH/s aren't CPU only, I'm sure. Seems like this launch goes to the nvidia/cudaminer folks... Too bad I don't have a decent Nvidia GPU myself, but thanks for the entertaining evening anyway

We win this!

[sambiohazard]

When I run Maxcoind.exe, what should I see?

You will see nothing but a blinking cursor. run it by opening the console and not by double clicking

Ok cool, so then the solution to the internal server error is... to just wait longer?

I am on windows and i used maxcoind -printtoconsole and it throws up everything it is writing to debug.log

[bugilt]

@maxcoinproject: another node: 213.192.56.163:8334

[jeroenn13]

Guys I have this, can someone verify I am mining maxcoin?  :


cudaminer --algo=keccak -H 1 -i 0 -l
 F227x9 -C 1 -o 127.0.0.1:9332 -O user:password
           *** CudaMiner for nVidia GPUs by Christian Buchner ***
                     This is version 2014-02-06 (beta)
        based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
            Cuda additions Copyright 2013,2014 Christian Buchner
          LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
          BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
          YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2014-02-06 22:24:06] 1 miner threads started, using 'keccak' algorithm.
[2014-02-06 22:24:06] GPU #0: GeForce GT 555M with compute capability 2.1
[2014-02-06 22:24:06] GPU #0: interactive: 0, tex-cache: 1D, single-alloc: 1
[2014-02-06 22:24:06] GPU #0: 32 hashes / 4.0 MB per warp.
[2014-02-06 22:24:06] GPU #0: Launch config 'F227x9' requires too much memory!
[2014-02-06 22:24:06] GPU #0: using launch configuration F227x9
[2014-02-06 22:24:06] GPU #0: GeForce GT 555M, 12052 khash/s
[2014-02-06 22:24:11] GPU #0: GeForce GT 555M, 11742 khash/s