Bitcoin Forum
July 19, 2018, 11:27:07 AM *
News: Latest stable version of Bitcoin Core: 0.16.1  [Torrent]. (New!)
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 [106] 107 108 »
  Print  
Author Topic: Avalon A7 announced  (Read 130872 times)
This is a self-moderated topic. If you do not want to be moderated by the person who started this topic, create a new topic.
throwaway2
Jr. Member
*
Offline Offline

Activity: 38
Merit: 0


View Profile
January 14, 2018, 06:49:47 PM
 #2101

Anyone else have their Raspberry pi have to be restarted (unplugged re plugged) every 3 days or so randomly?

Have you tried just hitting restart on cgminer or rebooting the entire system from the advanced dashboard instead of actually unplugging it?
1531999627
Hero Member
*
Offline Offline

Posts: 1531999627

View Profile Personal Message (Offline)

Ignore
1531999627
Reply with quote  #2

1531999627
Report to moderator
1531999627
Hero Member
*
Offline Offline

Posts: 1531999627

View Profile Personal Message (Offline)

Ignore
1531999627
Reply with quote  #2

1531999627
Report to moderator
1531999627
Hero Member
*
Offline Offline

Posts: 1531999627

View Profile Personal Message (Offline)

Ignore
1531999627
Reply with quote  #2

1531999627
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1531999627
Hero Member
*
Offline Offline

Posts: 1531999627

View Profile Personal Message (Offline)

Ignore
1531999627
Reply with quote  #2

1531999627
Report to moderator
1531999627
Hero Member
*
Offline Offline

Posts: 1531999627

View Profile Personal Message (Offline)

Ignore
1531999627
Reply with quote  #2

1531999627
Report to moderator
1531999627
Hero Member
*
Offline Offline

Posts: 1531999627

View Profile Personal Message (Offline)

Ignore
1531999627
Reply with quote  #2

1531999627
Report to moderator
goose1072
Full Member
***
Offline Offline

Activity: 236
Merit: 100


View Profile
January 14, 2018, 11:13:00 PM
 #2102

Anyone else have their Raspberry pi have to be restarted (unplugged re plugged) every 3 days or so randomly?

I have never have to restart, I have mine running for over a month now.

p4nt5
Member
**
Offline Offline

Activity: 73
Merit: 10


View Profile WWW
January 25, 2018, 03:28:35 AM
 #2103

Please help. One of my Avalon are restarting randomly. And I'm not sure what the problem is. Here's a log:
Code:
[Firmware Version] => Avalon Firmware - 20170719
    luci: 0afdd2d
    cgminer: 257f2f6
    cgminer-packages: 834e5a1
Reply was 'STATUS=S,When=1516255535,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV70,Elapsed=687,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM ID1=Ver[7411706-3162860]
    DNA[013c2a28291b8da2]
    Elapsed[689]
    MW[7502 7502 7480 7480]
    LW[29964]
    MH[1 1 0 0]
    HW[2]
    DH[1.715%]
    Temp[27]
    TMax[90]
    Fan[3870]
    FanR[46%]
    Vi[1182 1182 1178 1178]
    Vo[4424 4452 4411 4452]
    PLL0[704 104 372 1199 430 7]
    PLL1[307 58 297 1429 699 26]
    PLL2[378 70 286 1443 622 17]
    PLL3[230 42 251 1527 741 25]
    GHSmm[7832.03]
    WU[94680.61]
    Freq[695.32]
    PG[15]
    Led[0]
    MW0[24 20 21 28 18 22 28 25 26 26 23 32 26 26 18 20 25 23 20 26 30 20]
    MW1[30 20 25 30 16 20 29 27 27 21 27 21 26 19 28 32 23 26 30 24 23 22]
    MW2[26 35 34 24 25 26 29 21 25 27 26 25 29 29 26 25 22 19 21 25 26 19]
    MW3[33 15 26 19 16 18 25 28 36 33 29 32 22 26 24 29 29 25 22 26 18 30]
    TA[88]
    ECHU[0 0 0 0]
    ECMM[0]
    FAC0[0]
    SF0[600 636 672 708 744 780]
    SF1[600 636 672 708 744 780]
    SF2[600 636 672 708 744 780]
    SF3[600 636 672 708 744 780]
    PMUV[12c0 12c0]
    ERATIO0[0.62% 1.72% 4.43% 4.01% 4.22% 2.19% 3.02% 3.61% 2.91% 6.34% 4.68% 3.72% 6.02% 4.66% 4.15% 3.39% 3.32% 3.80% 1.71% 1.66% 1.27% 2.64%]
    ERATIO1[0.69% 0.60% 0.84% 1.00% 0.95% 0.48% 1.30% 2.56% 1.00% 1.28% 1.06% 1.77% 0.77% 1.13% 0.96% 1.28% 1.98% 1.49% 0.63% 0.76% 1.52% 0.28%]
    ERATIO2[1.31% 1.70% 1.17% 1.33% 1.75% 1.31% 2.02% 1.45% 3.25% 2.82% 2.51% 2.12% 1.05% 0.96% 1.02% 0.65% 1.55% 1.50% 1.98% 1.01% 1.00% 1.14%]
    ERATIO3[0.27% 0.66% 1.40% 0.92% 0.99% 0.77% 0.72% 1.32% 1.60% 0.74% 0.57% 1.29% 0.97% 0.51% 0.55% 1.22% 0.69% 0.73% 0.34% 0.99% 1.18% 0.66%]
    C_0_00[47501 46403 43654 44375 44311 44473 44856 45280 45404 42010 43402 44751 42084 43759 44144 45462 44542 44995 46502 46128 46537 45225]
    C_1_00[47372 47130 46946 46155 46865 47008 46724 45114 46500 46372 46508 45982 46835 46527 46717 46441 46162 45861 47014 46940 46135 47480]
    C_2_00[46813 46579 46318 46502 45492 46486 45905 46202 45017 45810 45309 44675 47005 46656 47019 47003 46106 46732 46318 47029 47226 46376]
    C_3_00[47626 46852 45704 46677 46417 46912 46542 46099 46664 47057 47143 46422 46708 47038 47241 46225 46677 46880 46968 46834 46330 47030]
    C_0_01[  296   811  2023  1854  1951   998  1399  1697  1360  2846  2129  1729  2697  2140  1910  1595  1530  1779   811   780   601  1228]
    C_1_01[  328   285   398   464   451   227   614  1185   472   599   499   828   363   533   452   600   932   693   297   359   712   134]
    C_2_01[  622   807   549   625   809   615   946   681  1510  1328  1168   968   498   452   486   309   724   714   935   479   479   534]
    C_3_01[  127   309   648   432   462   364   339   615   761   351   272   606   456   240   261   570   326   346   160   468   554   313]
    C_0_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_1_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_2_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_3_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_0_03[  156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156]
    C_1_03[  156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156     0     0]
    C_2_03[    0     0     0     0     0   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156]
    C_3_03[  155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155]
    C_0_04[    8     1     4    10     0     1     6     6     3     3     4     0     3     6     3     6     1     5     5     2     4     2]
    C_1_04[    4     1     5     1     3     6     1     3     7     5     5     4     0     0     2    12     0     3     6     7     0     0]
    C_2_04[    0     0     0     0     0     4     3     1     0     2     5     5     2     0     2     5     3     6     1     7     4     7]
    C_3_04[    4     2     5     5     4     7     2     4     1     2     7     7     2     6     1     4     6     6     5     7     3     0]
    GHSmm00[89.94 89.00 85.08 86.12 86.77 86.88 86.81 86.88 88.03 83.46 84.83 87.20 82.27 85.15 86.20 88.03 85.91 87.17 88.36 88.28 88.64 88.46]
    GHSmm01[90.41 90.88 89.90 89.47 89.44 90.30 89.47 87.67 89.18 89.58 89.18 88.50 89.47 89.04 89.76 89.72 88.64 88.57 90.26 90.19 89.83 90.66]
    GHSmm02[89.69 89.04 88.75 89.80 87.92 89.44 88.75 89.18 86.56 88.32 87.96 87.78 89.58 89.22 89.90 90.23 88.10 89.18 88.86 89.11 90.62 89.08]
    GHSmm03[91.02 89.72 88.64 90.08 89.54 90.73 89.83 89.40 89.36 89.62 90.01 89.15 90.05 90.48 90.37 89.54 89.33 90.08 90.41 89.76 89.29 90.37]
    FM[1]
    CRC[0 0 0 0]
    PAIRS[0 0 0]
    PVT_T[0-74/12-83/78 21-76/11-88/81 21-75/10-90/83 0-77/10-90/83],MM Count=1,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC Sensor=16000,AUC Temperature=26.55,Connection Overloaded=false,Voltage Offset=0,Nonce Mask=29,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=687,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=262144.00000000,Min Diff=1.00000000,Max Diff=524288.00000000,Min Diff Count=23,Max Diff Count=1351,Times Sent=18,Bytes Sent=1991,Times Recv=46,Bytes Recv=21677,Net Bytes Sent=1991,Net Bytes Recv=21677|STATS=2,ID=POOL1,Elapsed=687,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=4096.00000000,Min Diff=2048.00000000,Max Diff=4096.00000000,Min Diff Count=1,Max Diff Count=1,Times Sent=2,Bytes Sent=146,Times Recv=6,Bytes Recv=2765,Net Bytes Sent=146,Net Bytes Recv=2765|STATS=3,ID=POOL2,Elapsed=687,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=0,Bytes Sent=0,Times Recv=0,Bytes Recv=0,Net Bytes Sent=0,Net Bytes Recv=0|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1516255535
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.10.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AV70
   [Elapsed] => 687
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [MM ID1] => Ver[7411706-3162860]
    DNA[013c2a28291b8da2]
    Elapsed[689]
    MW[7502 7502 7480 7480]
    LW[29964]
    MH[1 1 0 0]
    HW[2]
    DH[1.715%]
    Temp[27]
    TMax[90]
    Fan[3870]
    FanR[46%]
    Vi[1182 1182 1178 1178]
    Vo[4424 4452 4411 4452]
    PLL0[704 104 372 1199 430 7]
    PLL1[307 58 297 1429 699 26]
    PLL2[378 70 286 1443 622 17]
    PLL3[230 42 251 1527 741 25]
    GHSmm[7832.03]
    WU[94680.61]
    Freq[695.32]
    PG[15]
    Led[0]
    MW0[24 20 21 28 18 22 28 25 26 26 23 32 26 26 18 20 25 23 20 26 30 20]
    MW1[30 20 25 30 16 20 29 27 27 21 27 21 26 19 28 32 23 26 30 24 23 22]
    MW2[26 35 34 24 25 26 29 21 25 27 26 25 29 29 26 25 22 19 21 25 26 19]
    MW3[33 15 26 19 16 18 25 28 36 33 29 32 22 26 24 29 29 25 22 26 18 30]
    TA[88]
    ECHU[0 0 0 0]
    ECMM[0]
    FAC0[0]
    SF0[600 636 672 708 744 780]
    SF1[600 636 672 708 744 780]
    SF2[600 636 672 708 744 780]
    SF3[600 636 672 708 744 780]
    PMUV[12c0 12c0]
    ERATIO0[0.62% 1.72% 4.43% 4.01% 4.22% 2.19% 3.02% 3.61% 2.91% 6.34% 4.68% 3.72% 6.02% 4.66% 4.15% 3.39% 3.32% 3.80% 1.71% 1.66% 1.27% 2.64%]
    ERATIO1[0.69% 0.60% 0.84% 1.00% 0.95% 0.48% 1.30% 2.56% 1.00% 1.28% 1.06% 1.77% 0.77% 1.13% 0.96% 1.28% 1.98% 1.49% 0.63% 0.76% 1.52% 0.28%]
    ERATIO2[1.31% 1.70% 1.17% 1.33% 1.75% 1.31% 2.02% 1.45% 3.25% 2.82% 2.51% 2.12% 1.05% 0.96% 1.02% 0.65% 1.55% 1.50% 1.98% 1.01% 1.00% 1.14%]
    ERATIO3[0.27% 0.66% 1.40% 0.92% 0.99% 0.77% 0.72% 1.32% 1.60% 0.74% 0.57% 1.29% 0.97% 0.51% 0.55% 1.22% 0.69% 0.73% 0.34% 0.99% 1.18% 0.66%]
    C_0_00[47501 46403 43654 44375 44311 44473 44856 45280 45404 42010 43402 44751 42084 43759 44144 45462 44542 44995 46502 46128 46537 45225]
    C_1_00[47372 47130 46946 46155 46865 47008 46724 45114 46500 46372 46508 45982 46835 46527 46717 46441 46162 45861 47014 46940 46135 47480]
    C_2_00[46813 46579 46318 46502 45492 46486 45905 46202 45017 45810 45309 44675 47005 46656 47019 47003 46106 46732 46318 47029 47226 46376]
    C_3_00[47626 46852 45704 46677 46417 46912 46542 46099 46664 47057 47143 46422 46708 47038 47241 46225 46677 46880 46968 46834 46330 47030]
    C_0_01[  296   811  2023  1854  1951   998  1399  1697  1360  2846  2129  1729  2697  2140  1910  1595  1530  1779   811   780   601  1228]
    C_1_01[  328   285   398   464   451   227   614  1185   472   599   499   828   363   533   452   600   932   693   297   359   712   134]
    C_2_01[  622   807   549   625   809   615   946   681  1510  1328  1168   968   498   452   486   309   724   714   935   479   479   534]
    C_3_01[  127   309   648   432   462   364   339   615   761   351   272   606   456   240   261   570   326   346   160   468   554   313]
    C_0_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_1_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_2_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_3_02[    0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0     0]
    C_0_03[  156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156]
    C_1_03[  156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156     0     0]
    C_2_03[    0     0     0     0     0   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156   156]
    C_3_03[  155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155   155]
    C_0_04[    8     1     4    10     0     1     6     6     3     3     4     0     3     6     3     6     1     5     5     2     4     2]
    C_1_04[    4     1     5     1     3     6     1     3     7     5     5     4     0     0     2    12     0     3     6     7     0     0]
    C_2_04[    0     0     0     0     0     4     3     1     0     2     5     5     2     0     2     5     3     6     1     7     4     7]
    C_3_04[    4     2     5     5     4     7     2     4     1     2     7     7     2     6     1     4     6     6     5     7     3     0]
    GHSmm00[89.94 89.00 85.08 86.12 86.77 86.88 86.81 86.88 88.03 83.46 84.83 87.20 82.27 85.15 86.20 88.03 85.91 87.17 88.36 88.28 88.64 88.46]
    GHSmm01[90.41 90.88 89.90 89.47 89.44 90.30 89.47 87.67 89.18 89.58 89.18 88.50 89.47 89.04 89.76 89.72 88.64 88.57 90.26 90.19 89.83 90.66]
    GHSmm02[89.69 89.04 88.75 89.80 87.92 89.44 88.75 89.18 86.56 88.32 87.96 87.78 89.58 89.22 89.90 90.23 88.10 89.18 88.86 89.11 90.62 89.08]
    GHSmm03[91.02 89.72 88.64 90.08 89.54 90.73 89.83 89.40 89.36 89.62 90.01 89.15 90.05 90.48 90.37 89.54 89.33 90.08 90.41 89.76 89.29 90.37]
    FM[1]
    CRC[0 0 0 0]
    PAIRS[0 0 0]
    PVT_T[0-74/12-83/78 21-76/11-88/81 21-75/10-90/83 0-77/10-90/83]
   [MM Count] => 1
   [Smart Speed] => 1
   [Connecter] => AUC
   [AUC VER] => AUC-20151208
   [AUC I2C Speed] => 400000
   [AUC I2C XDelay] => 19200
   [AUC Sensor] => 16000
   [AUC Temperature] => 26.55
   [Connection Overloaded] => false
   [Voltage Offset] => 0
   [Nonce Mask] => 29
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 0 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 687
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 262144.00000000
   [Min Diff] => 1.00000000
   [Max Diff] => 524288.00000000
   [Min Diff Count] => 23
   [Max Diff Count] => 1351
   [Times Sent] => 18
   [Bytes Sent] => 1991
   [Times Recv] => 46
   [Bytes Recv] => 21677
   [Net Bytes Sent] => 1991
   [Net Bytes Recv] => 21677
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 687
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 4096.00000000
   [Min Diff] => 2048.00000000
   [Max Diff] => 4096.00000000
   [Min Diff Count] => 1
   [Max Diff Count] => 1
   [Times Sent] => 2
   [Bytes Sent] => 146
   [Times Recv] => 6
   [Bytes Recv] => 2765
   [Net Bytes Sent] => 146
   [Net Bytes Recv] => 2765
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 687
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 0
   [Bytes Sent] => 0
   [Times Recv] => 0
   [Bytes Recv] => 0
   [Net Bytes Sent] => 0
   [Net Bytes Recv] => 0
)

[/code]
jchi2210
Full Member
***
Offline Offline

Activity: 294
Merit: 100



View Profile
January 28, 2018, 09:32:07 PM
 #2104

Guys I also have a 741 that keeps heating up every 2 to 3 minutes. It will hit around 100 C and then the fan will kick in to 100% to cool it off and then it will go right back down but will start working its way up. I contacted Canaan about it but was extremely let down with their service department.  At first they told me not to worry about it but I told them this would wear the fan out quicker than it normally would, then they told me they would send me a hash board. So I've received a hash board from them but I'm honestly not sure which one I need to replace. If I give you guys the log, will you be able to point me towards which one might need replaced? I'm not very well versed in the 741's

█▀▀▄█▀▀█▀▀██▀▀█▀▀▀▄  ▀█▀░░░█▀▀▄█▀▀▀█▀     |~~~~~~~~~~~~~~~~~~~~~ Decent.bet ~~~~~~~~~~~~~~~~~~~~                                Questions? Contact the team: Bitcointalk Thread  | Facebook
    █▀▀░░░░█▀▀░░░░░░░░░█▀▀▄█▀▀░░░░     |[Slots]  Revolutionizing the gaming industry. Be the house! [Sportsbook]                                                                                                      Twitter | Reddit
█▄▄▀█▄▄█▄▄██▄▄░░░░░░░█▄▄▀█▄▄░░░░     |95% of profits will go to Token Holders quarterly! The other 5% goes to a quarterly lottery!                                                                              Telegram
Steamtyme
Full Member
***
Offline Offline

Activity: 350
Merit: 249


View Profile
January 28, 2018, 09:40:19 PM
 #2105

Guys I also have a 741 that keeps heating up every 2 to 3 minutes. It will hit around 100 C and then the fan will kick in to 100% to cool it off and then it will go right back down but will start working its way up. I contacted Canaan about it but was extremely let down with their service department.  At first they told me not to worry about it but I told them this would wear the fan out quicker than it normally would, then they told me they would send me a hash board. So I've received a hash board from them but I'm honestly not sure which one I need to replace. If I give you guys the log, will you be able to point me towards which one might need replaced? I'm not very well versed in the 741's

First thing is the fan pulling air through the unit?

I mean to say does the air come in the back where the cables connect and leave the side the fan is mounted?

have you played around at all with your fan's min and max settings via the controller interface?
jchi2210
Full Member
***
Offline Offline

Activity: 294
Merit: 100



View Profile
January 28, 2018, 09:48:19 PM
 #2106

Guys I also have a 741 that keeps heating up every 2 to 3 minutes. It will hit around 100 C and then the fan will kick in to 100% to cool it off and then it will go right back down but will start working its way up. I contacted Canaan about it but was extremely let down with their service department.  At first they told me not to worry about it but I told them this would wear the fan out quicker than it normally would, then they told me they would send me a hash board. So I've received a hash board from them but I'm honestly not sure which one I need to replace. If I give you guys the log, will you be able to point me towards which one might need replaced? I'm not very well versed in the 741's

First thing is the fan pulling air through the unit?

I mean to say does the air come in the back where the cables connect and leave the side the fan is mounted?

have you played around at all with your fan's min and max settings via the controller interface?

The fan is pulling cool air through it, it is located outside in my shop and is pulling 27 C air through it. Once the fan kicks on it really cools it down but it seems like it climbs back up too quickly and the hash rate is only at 6.6 TH/s where it used to be at 7.3 Th/s a few weeks ago. I just remoted in and noticed that it is also resetting itself..Idk what is going on with the thing.

I haven't played around with the fan settings much, what should I set them to? I just wish Canaan's support for this thing was better. I told them about this problem as soon as I received the miner. I hate to say it but Bitmains support is better to me at this point.

█▀▀▄█▀▀█▀▀██▀▀█▀▀▀▄  ▀█▀░░░█▀▀▄█▀▀▀█▀     |~~~~~~~~~~~~~~~~~~~~~ Decent.bet ~~~~~~~~~~~~~~~~~~~~                                Questions? Contact the team: Bitcointalk Thread  | Facebook
    █▀▀░░░░█▀▀░░░░░░░░░█▀▀▄█▀▀░░░░     |[Slots]  Revolutionizing the gaming industry. Be the house! [Sportsbook]                                                                                                      Twitter | Reddit
█▄▄▀█▄▄█▄▄██▄▄░░░░░░░█▄▄▀█▄▄░░░░     |95% of profits will go to Token Holders quarterly! The other 5% goes to a quarterly lottery!                                                                              Telegram
Steamtyme
Full Member
***
Offline Offline

Activity: 350
Merit: 249


View Profile
January 28, 2018, 09:56:41 PM
Merited by SmartIphone (10)
 #2107

Guys I also have a 741 that keeps heating up every 2 to 3 minutes. It will hit around 100 C and then the fan will kick in to 100% to cool it off and then it will go right back down but will start working its way up. I contacted Canaan about it but was extremely let down with their service department.  At first they told me not to worry about it but I told them this would wear the fan out quicker than it normally would, then they told me they would send me a hash board. So I've received a hash board from them but I'm honestly not sure which one I need to replace. If I give you guys the log, will you be able to point me towards which one might need replaced? I'm not very well versed in the 741's

First thing is the fan pulling air through the unit?

I mean to say does the air come in the back where the cables connect and leave the side the fan is mounted?

have you played around at all with your fan's min and max settings via the controller interface?

The fan is pulling cool air through it, it is located outside in my shop and is pulling 5 C air through it. Once the fan kicks on it really cools it down but it seems like it climbs back up too quickly and the hash rate is only at 6.6 TH/s where it used to be at 7.3 Th/s a few weeks ago. I just remoted in and noticed that it is also resetting itself..Idk what is going on with the thing.

I haven't played around with the fan settings much, what should I set them to? I just wish Canaan's support for this thing was better. I told them about this problem as soon as I received the miner. I hate to say it but Bitmains support is better to me at this point.

I'm not near my miner at the moment. I'm guessing you aren't either if you had to remote into it.

I didn't play with my fan settings at all, I do know when it gets cooler in my shop that the fan will cycle sometimes like you describe. If you are worried you could change the min fan to something like 40 - 50%, in the cooler air that should be more than enough to try and stabilize it.

How long has you Avalon been running I know my hashrate fluctuates but after a few days from any reset or cycling power to the controller it stabilizes to around 7.6-7.9 TH/S per miner.

Have you made any changes to your setup since you were getting the 7.3? If you are looking at the average the resetting could be bringing that down? Just in case also what PSU are you using? anything else near the miner that could be drawing power on the same circuit? Do you have a stable internet connection?

jchi2210
Full Member
***
Offline Offline

Activity: 294
Merit: 100



View Profile
January 30, 2018, 03:34:59 AM
 #2108

Guys I also have a 741 that keeps heating up every 2 to 3 minutes. It will hit around 100 C and then the fan will kick in to 100% to cool it off and then it will go right back down but will start working its way up. I contacted Canaan about it but was extremely let down with their service department.  At first they told me not to worry about it but I told them this would wear the fan out quicker than it normally would, then they told me they would send me a hash board. So I've received a hash board from them but I'm honestly not sure which one I need to replace. If I give you guys the log, will you be able to point me towards which one might need replaced? I'm not very well versed in the 741's

First thing is the fan pulling air through the unit?

I mean to say does the air come in the back where the cables connect and leave the side the fan is mounted?

have you played around at all with your fan's min and max settings via the controller interface?

The fan is pulling cool air through it, it is located outside in my shop and is pulling 5 C air through it. Once the fan kicks on it really cools it down but it seems like it climbs back up too quickly and the hash rate is only at 6.6 TH/s where it used to be at 7.3 Th/s a few weeks ago. I just remoted in and noticed that it is also resetting itself..Idk what is going on with the thing.

I haven't played around with the fan settings much, what should I set them to? I just wish Canaan's support for this thing was better. I told them about this problem as soon as I received the miner. I hate to say it but Bitmains support is better to me at this point.

I'm not near my miner at the moment. I'm guessing you aren't either if you had to remote into it.

I didn't play with my fan settings at all, I do know when it gets cooler in my shop that the fan will cycle sometimes like you describe. If you are worried you could change the min fan to something like 40 - 50%, in the cooler air that should be more than enough to try and stabilize it.

How long has you Avalon been running I know my hashrate fluctuates but after a few days from any reset or cycling power to the controller it stabilizes to around 7.6-7.9 TH/S per miner.

Have you made any changes to your setup since you were getting the 7.3? If you are looking at the average the resetting could be bringing that down? Just in case also what PSU are you using? anything else near the miner that could be drawing power on the same circuit? Do you have a stable internet connection?



Sorry it took so long to get back with you and I wanted to let you know I appreciate any support you are giving me! I have been watching it for a few days now and its really weird, the uptime says that it has been up for 2 days (the last time I restarted it) but whenever i go to miner status it says that it has only been up for 6 mins and it is constantly resetting. I'm thinking that the cgminer keeps resetting itself for some odd reason..any idea what I should do? I set the fan to a minimum of 50% and it seems like that did the trick so thank you for that!

█▀▀▄█▀▀█▀▀██▀▀█▀▀▀▄  ▀█▀░░░█▀▀▄█▀▀▀█▀     |~~~~~~~~~~~~~~~~~~~~~ Decent.bet ~~~~~~~~~~~~~~~~~~~~                                Questions? Contact the team: Bitcointalk Thread  | Facebook
    █▀▀░░░░█▀▀░░░░░░░░░█▀▀▄█▀▀░░░░     |[Slots]  Revolutionizing the gaming industry. Be the house! [Sportsbook]                                                                                                      Twitter | Reddit
█▄▄▀█▄▄█▄▄██▄▄░░░░░░░█▄▄▀█▄▄░░░░     |95% of profits will go to Token Holders quarterly! The other 5% goes to a quarterly lottery!                                                                              Telegram
Steamtyme
Full Member
***
Offline Offline

Activity: 350
Merit: 249


View Profile
January 30, 2018, 03:56:53 AM
 #2109

That is strange. I Just want to make sure that you are refreshing the miner status page? If you had it open in its own tab it will not refresh on its own.

That would be the simple solve and possible if it always says 6 minutes. What do you see in your API  log in the "elapsed" field, I think that is the timer in seconds.

Can you post a photo of your status and API log

Now these are just throw in ideas. What pool are you mining? What does the pool show for a hashrate? Have you tried swapping AUC3 converters if you ha e a spare?
If we don't stumble on it it might be a firmware issue
jchi2210
Full Member
***
Offline Offline

Activity: 294
Merit: 100



View Profile
January 31, 2018, 01:30:12 PM
 #2110

That is strange. I Just want to make sure that you are refreshing the miner status page? If you had it open in its own tab it will not refresh on its own.

That would be the simple solve and possible if it always says 6 minutes. What do you see in your API  log in the "elapsed" field, I think that is the timer in seconds.

Can you post a photo of your status and API log

Now these are just throw in ideas. What pool are you mining? What does the pool show for a hashrate? Have you tried swapping AUC3 converters if you ha e a spare?
If we don't stumble on it it might be a firmware issue


I keep clicking on the minerstatus button at the top to refresh it.

Here is my miner status page


as you can see it says 1 min 10 seconds, i'm not sure why that is constantly resetting when it used to not do that.

and here is the API log
Code:
[Firmware Version] => Avalon Firmware - 20170603
    luci: ffc1d59
    cgminer: 2354004
    cgminer-packages: d309c69
Reply was 'STATUS=S,When=1483626365,Code=70,Msg=CGMiner stats,Description=cgminer 4.10.0|STATS=0,ID=AV70,Elapsed=118,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,MM ID1=Ver[7411706-3162860]
    DNA[0131ce5f1c5ba86b]
    Elapsed[119]
    MW[1320 1298 1298 1298]
    LW[5214]
    MH[9 2 3 1]
    HW[15]
    DH[0.000%]
    Temp[18]
    TMax[69]
    Fan[4260]
    FanR[51%]
    Vi[1215 1215 1210 1210]
    Vo[4434 4447 4447 4429]
    GHSmm[6936.89]
    WU[88238.82]
    Freq[615.85]
    PG[15]
    Led[0]
    MW0[5 6 5 7 6 8 4 3 6 5 1 1 6 6 4 3 5 5 5 1 3 3]
    MW1[3 3 4 7 4 2 5 1 3 8 1 5 2 4 5 4 2 3 2 2 8 4]
    MW2[4 4 5 3 5 3 1 6 1 4 3 6 9 4 4 5 4 6 5 4 2 6]
    MW3[6 3 7 4 1 4 2 5 3 4 3 4 3 0 5 1 2 3 4 8 3 2]
    TA[88]
    ECHU[16 0 0 0]
    ECMM[0]
    FM[1]
    CRC[0 0 0 0]
    PAIRS[0 0 0]
    PVT_T[0-52/13-60/58 21-56/12-62/58 0-60/10-69/62 5-33/10-65/60],MM Count=1,Smart Speed=1,Connecter=AUC,AUC VER=AUC-20151208,AUC I2C Speed=400000,AUC I2C XDelay=19200,AUC Sensor=19387,AUC Temperature=16.28,Connection Overloaded=false,Voltage Offset=0,Nonce Mask=29,USB Pipe=0,USB Delay=r0 0.000000 w0 0.000000,USB tmo=0 0|STATS=1,ID=POOL0,Elapsed=118,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=524288.00000000,Min Diff=524288.00000000,Max Diff=524288.00000000,Min Diff Count=383,Max Diff Count=383,Times Sent=4,Bytes Sent=334,Times Recv=12,Bytes Recv=8502,Net Bytes Sent=334,Net Bytes Recv=8502|STATS=2,ID=POOL1,Elapsed=118,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=152,Times Recv=4,Bytes Recv=1486,Net Bytes Sent=152,Net Bytes Recv=1486|STATS=3,ID=POOL2,Elapsed=118,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=0.00000000,Min Diff=0.00000000,Max Diff=0.00000000,Min Diff Count=0,Max Diff Count=0,Times Sent=2,Bytes Sent=145,Times Recv=5,Bytes Recv=1595,Net Bytes Sent=145,Net Bytes Recv=1595|'
[STATUS] =>
(
   [STATUS] => S
   [When] => 1483626365
   [Code] => 70
   [Msg] => CGMiner stats
   [Description] => cgminer 4.10.0
)
[STATS0] =>
(
   [STATS] => 0
   [ID] => AV70
   [Elapsed] => 118
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [MM ID1] => Ver[7411706-3162860]
    DNA[0131ce5f1c5ba86b]
    Elapsed[119]
    MW[1320 1298 1298 1298]
    LW[5214]
    MH[9 2 3 1]
    HW[15]
    DH[0.000%]
    Temp[18]
    TMax[69]
    Fan[4260]
    FanR[51%]
    Vi[1215 1215 1210 1210]
    Vo[4434 4447 4447 4429]
    GHSmm[6936.89]
    WU[88238.82]
    Freq[615.85]
    PG[15]
    Led[0]
    MW0[5 6 5 7 6 8 4 3 6 5 1 1 6 6 4 3 5 5 5 1 3 3]
    MW1[3 3 4 7 4 2 5 1 3 8 1 5 2 4 5 4 2 3 2 2 8 4]
    MW2[4 4 5 3 5 3 1 6 1 4 3 6 9 4 4 5 4 6 5 4 2 6]
    MW3[6 3 7 4 1 4 2 5 3 4 3 4 3 0 5 1 2 3 4 8 3 2]
    TA[88]
    ECHU[16 0 0 0]
    ECMM[0]
    FM[1]
    CRC[0 0 0 0]
    PAIRS[0 0 0]
    PVT_T[0-52/13-60/58 21-56/12-62/58 0-60/10-69/62 5-33/10-65/60]
   [MM Count] => 1
   [Smart Speed] => 1
   [Connecter] => AUC
   [AUC VER] => AUC-20151208
   [AUC I2C Speed] => 400000
   [AUC I2C XDelay] => 19200
   [AUC Sensor] => 19387
   [AUC Temperature] => 16.28
   [Connection Overloaded] => false
   [Voltage Offset] => 0
   [Nonce Mask] => 29
   [USB Pipe] => 0
   [USB Delay] => r0 0.000000 w0 0.000000
   [USB tmo] => 0 0
)
[STATS1] =>
(
   [STATS] => 1
   [ID] => POOL0
   [Elapsed] => 118
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 524288.00000000
   [Min Diff] => 524288.00000000
   [Max Diff] => 524288.00000000
   [Min Diff Count] => 383
   [Max Diff Count] => 383
   [Times Sent] => 4
   [Bytes Sent] => 334
   [Times Recv] => 12
   [Bytes Recv] => 8502
   [Net Bytes Sent] => 334
   [Net Bytes Recv] => 8502
)
[STATS2] =>
(
   [STATS] => 2
   [ID] => POOL1
   [Elapsed] => 118
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 2
   [Bytes Sent] => 152
   [Times Recv] => 4
   [Bytes Recv] => 1486
   [Net Bytes Sent] => 152
   [Net Bytes Recv] => 1486
)
[STATS3] =>
(
   [STATS] => 3
   [ID] => POOL2
   [Elapsed] => 118
   [Calls] => 0
   [Wait] => 0.000000
   [Max] => 0.000000
   [Min] => 99999999.000000
   [Pool Calls] => 0
   [Pool Attempts] => 0
   [Pool Wait] => 0.000000
   [Pool Max] => 0.000000
   [Pool Min] => 99999999.000000
   [Pool Av] => 0.000000
   [Work Had Roll Time] => false
   [Work Can Roll] => false
   [Work Had Expire] => false
   [Work Roll Time] => 0
   [Work Diff] => 0.00000000
   [Min Diff] => 0.00000000
   [Max Diff] => 0.00000000
   [Min Diff Count] => 0
   [Max Diff Count] => 0
   [Times Sent] => 2
   [Bytes Sent] => 145
   [Times Recv] => 5
   [Bytes Recv] => 1595
   [Net Bytes Sent] => 145
   [Net Bytes Recv] => 1595
)
[/code]

█▀▀▄█▀▀█▀▀██▀▀█▀▀▀▄  ▀█▀░░░█▀▀▄█▀▀▀█▀     |~~~~~~~~~~~~~~~~~~~~~ Decent.bet ~~~~~~~~~~~~~~~~~~~~                                Questions? Contact the team: Bitcointalk Thread  | Facebook
    █▀▀░░░░█▀▀░░░░░░░░░█▀▀▄█▀▀░░░░     |[Slots]  Revolutionizing the gaming industry. Be the house! [Sportsbook]                                                                                                      Twitter | Reddit
█▄▄▀█▄▄█▄▄██▄▄░░░░░░░█▄▄▀█▄▄░░░░     |95% of profits will go to Token Holders quarterly! The other 5% goes to a quarterly lottery!                                                                              Telegram
Steamtyme
Full Member
***
Offline Offline

Activity: 350
Merit: 249


View Profile
January 31, 2018, 02:03:13 PM
 #2111

I see that you are using nice hash. Is there a chance that all the resets are from it switching pools or wherever it is being paid to point?

Have you tried running it to your second pool "slush" for a while to see if it happens with steady work available.

I've never used nicehash so I don't know for sure how that works out.

Also what does it say on the overview tab for uptime?
akadamson
Member
**
Offline Offline

Activity: 140
Merit: 18


View Profile
February 06, 2018, 09:53:40 PM
 #2112

quick question.  741's, 4 on one controller.  -1 undervolt. on 1200W 240v PSUs. (this doesn't mater as I've ran them on 1600W 120v  PSUs with same response)

Each of them tends to show 2.x HW errors.  Based upon seeing other people  controller screen shots this seems to be normal, but what causes it?  Can it be influenced one way or the other?  And is that the reasonable number to see.  Doesn't hardly every change even after 2 weeks of running, or after 20 mins of a restart.  Is it related to the undervolt setting?
PeaMine
Hero Member
*****
Offline Offline

Activity: 768
Merit: 501



View Profile
February 07, 2018, 07:47:39 PM
 #2113

Just a heads up, I would highly recommend avoiding one of their official distributors, Minerwarez
https://bitcointalk.org/index.php?topic=2277516.140

Datacenter Technician and Electrician
endi17
Jr. Member
*
Offline Offline

Activity: 123
Merit: 0


View Profile
March 22, 2018, 12:30:16 AM
 #2114

does anyone knows how can i see my miner status from phone?
HagssFIN
Hero Member
*****
Offline Offline

Activity: 952
Merit: 1143


Electrician. Mining since 2014.


View Profile WWW
March 22, 2018, 12:31:40 AM
 #2115

You can access the miner configuration page when you are in the same local area network with your computer, laptop, smartphone, etc.

If you mean remote access, one quick option is to install TeamViewer in a PC located in the same local area network as your miner controller and access that PC by using the TeamViewer app with your smartphone.

endi17
Jr. Member
*
Offline Offline

Activity: 123
Merit: 0


View Profile
March 24, 2018, 02:25:57 AM
 #2116

You can access the miner configuration page when you are in the same local area network with your computer, laptop, smartphone, etc.

If you mean remote access, one quick option is to install TeamViewer in a PC located in the same local area network as your miner controller and access that PC by using the TeamViewer app with your smartphone.
Thank you
endi17
Jr. Member
*
Offline Offline

Activity: 123
Merit: 0


View Profile
March 24, 2018, 11:47:40 AM
 #2117

I recived my order about a week before at cryptouniverse and before three days i put it into work. It was hashing pretty fine till tonight when it keeps restarting. The temperatures dont cross the 27/93 max. But when I lower my voltage to -1 it works without restarting. So it restarts only when the voltage ise set to 0. Can somwbody tell me whats wrong?
HagssFIN
Hero Member
*****
Offline Offline

Activity: 952
Merit: 1143


Electrician. Mining since 2014.


View Profile WWW
March 24, 2018, 11:52:45 AM
 #2118

I recived my order about a week before at cryptouniverse and before three days i put it into work. It was hashing pretty fine till tonight when it keeps restarting. The temperatures dont cross the 27/93 max. But when I lower my voltage to -1 it works without restarting. So it restarts only when the voltage ise set to 0. Can somwbody tell me whats wrong?
My guess is that your A741 is overheating, and therefore it shuts down.
After it has cooled down it will try to operate again, and when it overheats again, it shuts down.
And this cycle keeps going over and over again.

I would try to get better ventilation, the key is to get rid of that hot air in an effective way.

What are your temps when the voltage offset setting is -1 ?

endi17
Jr. Member
*
Offline Offline

Activity: 123
Merit: 0


View Profile
March 24, 2018, 11:58:13 AM
 #2119

25/83max
HagssFIN
Hero Member
*****
Offline Offline

Activity: 952
Merit: 1143


Electrician. Mining since 2014.


View Profile WWW
March 24, 2018, 12:20:00 PM
 #2120

25/83max

Those are nice temps, A741 performance is the most stable if the temp is less than or equal to 88 deg Celsius.

Pages: « 1 ... 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 [106] 107 108 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!