NiceHash EQM Zcash NVIDIA optimized miner [Maxwell/Pascal] + CPU mining v1.0.4c

[sp_]

1060 3gb with 50% tdp:

180sol/s@60Watt

Light oc (when running with the -ca parameter) (100% tdp)

225sol/s@100Watt

[QuintLeo]

Sure np, it is Inno3D GTX 1070 iChill X4, TDP at 50%, mem clock +600 (total of 4500).

 None of my cards have been able to handle +600 memory clock reliably, most of them can do +550 a few +500 at most.
 Mix of at least 3 different Gigabyte models (couple ITX, 4 2-fan, 2 Windforce 3-fan) and some EVGAs.

 I've never bothered trying to max efficiency on eqm though, as my current situation gives me a fixed monthly cost for electric so *FOR ME FOR NOW* it makes more sense to try to push for max hash.

[m1n1ngP4d4w4n]

same setting, but i can't get that hash with that wattage, the maximum is 310 sol 100w, what is your core clock?

6x GTX 1070 EVGA FTW - Drivers 376.19

Core +140 (real core ~1860Mhz)
vCore +20%
Mem +685 (real core ~4482Mhz)
TDP 50% (~91w per card)




~320 Sols/card - Total 1927 sols/s with 2 process of EQM (3 cards each) i know you can do 2 threads per cards now, but i found it to be less stable in my experiments (had some crashes, and get 3% less sols/s overall)

~695W @ wall - 1 sol/s per 0.36066W

Very efficient for now ;-), will play a bit more with OC/vCore over the week-end, this configuration being rock stable for 2 days, 0 rejected shares. Would like to see if some settings or code optimizations could max out the GPU's they're not fully maxed (about 96% load in nvidia-smi), i used the usual variables to max out cards, but it's not 100%.

Cheers.

moving above 600 mem give me artifact and i have samsung memory, it must be the model, i have the g1 gaming, the bst i could get was 93 watt but 306 sol

I have micron memory, from what i heard the samsung perform better in OC, but the EVGA FTW design has something that i think help alot when doing overclock, a double 8 pin power supply, i think even @ lower
TDP it help maintaining very stable voltage, and probably help higher OC's to be stable, i can even push the memory to 780 when i lower the core to +0mhz when mining ETH (it's more efficient for ETH to boost, mem) also it probably help that this card is made for OC and already OC'ed by design, as stated by many before not all cards are equal, due to the making of electronics some chip perform better than others (has been verified with CPU overlclocking for many many years) the fact that you have a card OC'ed by default mean the chip was already "pre" selected to be better than the others and more stable. It probably help too

[ioglnx]

Server in EU again down and the website also down of nicehash.
If you min to eu server check if you not waste energy again for nothing as long as the servers are down.

[m1n1ngP4d4w4n]

Server in EU again down and the website also down of nicehash.
If you min to eu server check if you not waste energy again for nothing as long as the servers are down.

Site is down, stratum seems OK.

[Newton90]

posting in this topic,because don't know where to post.i have 12 sol on 4690k instead of 20 with nicehash nheqminer.of course i set -t 4,and tried ver 0.2, 0.3, 0.4.what could be the reason?

[k0stas]

1060 3gb with 50% tdp:

180sol/s@60Watt

Light oc (when running with the -ca parameter) (100% tdp)

225sol/s@100Watt

1060 3gb 66%tdp core clock 1731, memory clock 4484

225sol/s at ~85watt

thats for palit samsung memory

[seljak]

I have a big problem with my Gigabyte gtx750.
After some time mining and otherwise inactive computer the card shuts down the fan. The card drops the clock to 824mhz and heats up to 95degrees.
It doesnt happen with any other miner/algo or any other card. Is this somehow related to this miner? How to force P0 state? The integrated solution in nicehashminer doesnt work.

[_ZET_]

We purchased NVDIA graphic cards.

Shortly we will present review. I am courious how it works with current miner.

[ManyMan]

Who "we" ?

[restless]

I know its not the place... but ...
How can I change launch parameters in "new" nicehash miner GUI?
I want to use 1 thread on my main desktop GPU

[m1n1ngP4d4w4n]

same setting, but i can't get that hash with that wattage, the maximum is 310 sol 100w, what is your core clock?

6x GTX 1070 EVGA FTW - Drivers 376.19

Core +140 (real core ~1860Mhz)
vCore +20%
Mem +685 (real core ~4482Mhz)
TDP 50% (~91w per card)




~320 Sols/card - Total 1927 sols/s with 2 process of EQM (3 cards each) i know you can do 2 threads per cards now, but i found it to be less stable in my experiments (had some crashes, and get 3% less sols/s overall)

~695W @ wall - 1 sol/s per 0.36066W

Very efficient for now ;-), will play a bit more with OC/vCore over the week-end, this configuration being rock stable for 2 days, 0 rejected shares. Would like to see if some settings or code optimizations could max out the GPU's they're not fully maxed (about 96% load in nvidia-smi), i used the usual variables to max out cards, but it's not 100%.

Cheers.

Revision on my post, now i'm able to work with only 1 process and 2 threads by GPU's with the "-ca -ca" switches (the -cd 0 0 1 1 etc... wasn't working crashing), now pushing 50-60 more sol/s (1927 -> 1980-90) than with 2 process 1 threads per card, seems to also have reduced the few reject/stales i could have sometimes (very little about 0.2%, now looking more like 0.1%) stable since ~24h  

Still wondering what those "Solver Interrupted" messages are, probably part of the solving process to avoid collisions or something, would love to get some infos

Cheers.

[Amph]

yeah the two instances trick is fabulous, i'm also at 330 sol with 100 watt, but my mem oc is msaller only 400+ up to 600 i didn't see any big difference, i guess i need to go above 600

[BryanC]

Damn! Went from total ~450 Sols/s on previous version to ~650 Sols/s on 2x Asus STRIX-GTX980Ti. Stock memory settings.

Edit: ... and running two threads provides a 6% boost (~40 sols/s). I can't get my GPU memory clock to OC in the Asus GPU tweak - any suggestions? I change the value, hit accept, and it changes back to the default value.

[_ZET_]

Who "we" ?

Check our sites:

Twitter: https://twitter.com/ZET_mining

Facebook: https://www.facebook.com/zetproject.eu/

Ebay: http://www.ebay.com/itm/262764597525?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

All about mining.

[kopija]

Damn! Went from total ~450 Sols/s on previous version to ~650 Sols/s on 2x Asus STRIX-GTX980Ti. Stock memory settings.

Edit: ... and running two threads provides a 6% boost (~40 sols/s). I can't get my GPU memory clock to OC in the Asus GPU tweak - any suggestions? I change the value, hit accept, and it changes back to the default value.

Thats because Maxwell cards have issues with Windows 10 and P2 state regarding memory overclocking.
You can force P0 state by running nvidiasetp0state.exe that resides in root folder of official Nicehash mining tool.
Then you will be able to OC memory.
Or you can use Nvidia Inspector and OC memory there my selecting P2 state in drop-down menu of its overclocking panel.

[marcus_v]

it seems faster. hopefully it will be useful on any pool soon. don't have much hash and don't want to wait forever for payment on nicehash

[Kompik]

Do you believe you can push it even more? Maybe over 400 sols for the 1070?

[bensam1231]

EWBF .05 is out, runs 5% slower then EQM (with two instances) and uses the same power (less efficient), but not pool locked. 2% dev fee besides.

[Slava_K]

EWBF .05 is out, runs 5% slower then EQM (with two instances) and uses the same power (less efficient), but not pool locked. 2% dev fee besides.

For me 346 hash on 1080 is good.