psjw4450
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 03:12:52 PM |
|
Any idea with my issue luke?
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 03:21:47 PM |
|
Any idea with my issue luke?
Sounds like an OS issue. Check that your /etc/ld.so.conf is correct, maybe rerun ldconfig. If that doesn't help, mention here where the library is, the output of ldd bfgminer, and the content of /etc/ld.*
|
|
|
|
pluMmet
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 05:57:46 PM |
|
How would this terminal code be properly put into the config file? sudo bfgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u <user> -p <Password> -S all
And is the config file named bfgminer.conf?
Running the sudo command I just listed then I try to save out to conf file from the terminal window running bfgMiner but it does not seem to work...
|
|
|
|
JBT
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 05:59:56 PM |
|
i have 12 usb eruptors but bfg only seems to see 9...... restart then i only picks up 7, restart picks up 10 with 2 giving errors?!
|
|
|
|
-Redacted-
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 06:18:05 PM |
|
How would this terminal code be properly put into the config file? sudo bfgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u <user> -p <Password> -S all
And is the config file named bfgminer.conf?
Running the sudo command I just listed then I try to save out to conf file from the terminal window running bfgMiner but it does not seem to work...
That would be because sudo executes as root and would be saving it under root's directory. Try just running the bfgminer command without using sudo.
|
|
|
|
Mudbankkeith
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 06:25:47 PM |
|
i have 12 usb eruptors but bfg only seems to see 9...... restart then i only picks up 7, restart picks up 10 with 2 giving errors?!
what size are your usb hubs? If the psu is not big enough some erupters will not start
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
xyzzy099
Legendary
Offline
Activity: 1065
Merit: 1077
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 06:31:19 PM |
|
How would this terminal code be properly put into the config file? sudo bfgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u <user> -p <Password> -S all
And is the config file named bfgminer.conf?
Running the sudo command I just listed then I try to save out to conf file from the terminal window running bfgMiner but it does not seem to work...
That would be because sudo executes as root and would be saving it under root's directory. Try just running the bfgminer command without using sudo. That doesn't sound correct. Saving the config from BFGMiner saves it in the current directory, right? Using sudo does not change the current directory, and it also does not change the environment - so even if it save to $HOME, it would still be your home directory, not root's.
|
Libertarians: Diligently plotting to take over the world and leave you alone.
|
|
|
pluMmet
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 06:47:52 PM |
|
Okay I had to save it to another directory to get it to save and I got this: ______________________________________________________________________ { "pools" : [ { "url" : "stratum+tcp://stratum.mining.eligius.st:3334", "user" : "<user>", "pass" : "<password>", "pool-priority" : "0" }, { "url" : "stratum+tcp://stratum.mining.eligius.st:3334", "user" : "<user>", "pass" : "<password>", "pool-priority" : "1" } ] , "temp-cutoff" : "95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95", "temp-target" : "89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89", "algo" : "fastauto", "api-port" : "4028", "expiry" : "120", "expiry-lp" : "3600", "gpu-dyninterval" : "7", "log" : "5", "no-pool-disable" : true, "no-show-processors" : true, "no-show-procs" : true, "no-unicode" : true, "queue" : "9", "scan-time" : "60", "skip-security-checks" : "0", "submit-stale" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/share/bfgminer" } ______________________________________________________________________ Thanks guys ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
JBT
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 06:58:41 PM |
|
i have 12 usb eruptors but bfg only seems to see 9...... restart then i only picks up 7, restart picks up 10 with 2 giving errors?!
what size are your usb hubs? If the psu is not big enough some erupters will not start mmm u might have a point there. its a 10port with a 1000ma power. 2 low? ed 2 running of pc no problems there
|
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:04:44 PM |
|
i have 12 usb eruptors but bfg only seems to see 9...... restart then i only picks up 7, restart picks up 10 with 2 giving errors?!
what size are your usb hubs? If the psu is not big enough some erupters will not start mmm u might have a point there. its a 10port with a 1000ma power. 2 low? ed 2 running of pc no problems there 1000mA is good for 2 ports.
|
|
|
|
JBT
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:05:52 PM |
|
i have 12 usb eruptors but bfg only seems to see 9...... restart then i only picks up 7, restart picks up 10 with 2 giving errors?!
what size are your usb hubs? If the psu is not big enough some erupters will not start mmm u might have a point there. its a 10port with a 1000ma power. 2 low? ed 2 running of pc no problems there 1000mA is good for 2 ports. so i actually need 5A since each usb pulls 0.5A ?
|
|
|
|
xyzzy099
Legendary
Offline
Activity: 1065
Merit: 1077
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:10:15 PM |
|
Okay I had to save it to another directory to get it to save and I got this: ______________________________________________________________________ { "pools" : [ { "url" : "stratum+tcp://stratum.mining.eligius.st:3334", "user" : "<user>", "pass" : "<password>", "pool-priority" : "0" }, { "url" : "stratum+tcp://stratum.mining.eligius.st:3334", "user" : "<user>", "pass" : "<password>", "pool-priority" : "1" } ] , "temp-cutoff" : "95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95,95", "temp-target" : "89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89,89","algo" : "fastauto", "api-port" : "4028", "expiry" : "120", "expiry-lp" : "3600", "gpu-dyninterval" : "7", "log" : "5", "no-pool-disable" : true, "no-show-processors" : true, "no-show-procs" : true, "no-unicode" : true, "queue" : "9", "scan-time" : "60", "skip-security-checks" : "0", "submit-stale" : true, "temp-hysteresis" : "3", "shares" : "0", "kernel-path" : "/usr/share/bfgminer" } ______________________________________________________________________ Thanks guys ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Every time I save the config from BFGMiner I have to go in and edit out all these multiples of the temp-* values, because BFGMiner (which created the file) says there are too many values, and won't start. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
Libertarians: Diligently plotting to take over the world and leave you alone.
|
|
|
Mudbankkeith
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:12:14 PM |
|
i have 12 usb eruptors but bfg only seems to see 9...... restart then i only picks up 7, restart picks up 10 with 2 giving errors?!
what size are your usb hubs? If the psu is not big enough some erupters will not start mmm u might have a point there. its a 10port with a 1000ma power. 2 low? ed 2 running of pc no problems there 1000mA is good for 2 ports. so i actually need 5A since each usb pulls 0.5A ? I run a bank of 10 port usb3 hubs with 4A psu 10 erupters in each hub, 70 erupters in total. over the last month I have blown 2 psus I am replacing with 5A units but this is getting expensive.
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
JBT
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:19:02 PM |
|
I run a bank of 10 port usb3 hubs with 4A psu 10 erupters in each hub, 70 erupters in total. over the last month I have blown 2 psus
I am replacing with 5A units but this is getting expensive.
so how much does each erupter actually pull surely not 0.5A? bah. i'll get a 6A psu tomrrow or another usb hub
|
|
|
|
pluMmet
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:38:03 PM |
|
Every time I save the config from BFGMiner I have to go in and edit out all these multiples of the temp-* values, because BFGMiner (which created the file) says there are too many values, and won't start. ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Interesting... In Ubuntu I've never been able to get it to run using the conf file I have to use that whole sudo string every time. I tried your idea: "temp-cutoff" : "95", "temp-target" : "89",Still gives the "To Many Values" error ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Mudbankkeith
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:39:07 PM |
|
I run a bank of 10 port usb3 hubs with 4A psu 10 erupters in each hub, 70 erupters in total. over the last month I have blown 2 psus
I am replacing with 5A units but this is getting expensive.
so how much does each erupter actually pull surely not 0.5A? bah. i'll get a 6A psu tomrrow or another usb hub Go for another hub with a 5A psu. The hub you already have, will not handle more power. If you use a 4A 10 port hub just use 9 erupters and a fan(for the chips and psu) Edit. expect about 550mA for each erupter
|
BTc donations welcome:- 13c2KuzWCaWFTXF171Zn1HrKhMYARPKv97
|
|
|
Luke-Jr (OP)
Legendary
Offline
Activity: 2576
Merit: 1186
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:39:19 PM |
|
so i actually need 5A since each usb pulls 0.5A ? Plus a bit more for the hub itself... so how much does each erupter actually pull surely not 0.5A? bah. i'll get a 6A psu tomrrow or another usb hub Yes, they use the full 0.5A. ... and don't assume a hub that only includes a 1A power supply can handle more!
|
|
|
|
astutiumRob
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:44:37 PM |
|
Odd problem with build of latest from git ... Being a few versions behind, thought a bit of upgrading was in order ... built from source as before, same option, seemed to all go through as expected, but failed to start (or started and quit) as no 'screen' for me to switch to. My startup script is screen -dmS BFG /home/bitcoin/bfgminer/bfgminer --config /root/.bfgminer/bfgminer.conf -S all
which was fine with 3.1.3 - Started: [2013-08-16 23:43:51] - [ 34 days 20:52:08] latest version just 'stops' with [2013-09-20 20:38:27] clDevicesNum returned error, no GPUs usable
without the -S all it starts and works, but doesnt find any of the USB-BlockErupters (only the BFL Singles) with the -S all it fails dmesg finds all the USB's ok bfgminer -S all -D -d? finds everything it should - snippet: [2013-09-20 20:40:06] Found ICA43 at /dev/ttyUSB45 [2013-09-20 20:40:06] ICA43: Init: baud=115200 work_division=1 fpga_count=1 [2013-09-20 20:40:06] ICA43: Init: mode=value read_count=100 Hs=3.000000e-09 [2013-09-20 20:40:06] Icarus Detect: Attempting to open /dev/ttyUSB19 [2013-09-20 20:40:06] Acquired exclusive advisory lock on /dev/ttyUSB19 [2013-09-20 20:40:06] Icarus Read: No data in 0.10 seconds [2013-09-20 20:40:06] Icarus Detect: Test failed at /dev/ttyUSB19: get 00000000, should: 000187a2 [2013-09-20 20:40:06] Acquired exclusive advisory lock on /dev/ttyUSB37 [2013-09-20 20:40:06] BFL: Attempting to open /dev/ttyUSB37 [2013-09-20 20:40:06] BFL: Didn't recognise BitForce on /dev/ttyUSB37 [2013-09-20 20:40:06] Acquired exclusive advisory lock on /dev/ttyUSB19 [2013-09-20 20:40:06] BFL: Attempting to open /dev/ttyUSB19
But it simply wont start with the -S all and without it sees no Block Erupters Anything else I should be trying to debug the situation ?
|
|
|
|
RicRock
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:47:04 PM |
|
But it simply wont start with the -S all and without it sees no Block Erupters
Anything else I should be trying to debug the situation ?
I've never been able to start my erupters without a -S 'erupters:all' switch My command line: /usr/bin/screen -dmS M bfgminer --no-submit-stale -S 'opencl:noauto' -S 'erupter:all' -c /etc/miner.conf
|
|
|
|
HellDiverUK
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 20, 2013, 07:50:25 PM |
|
Blades aren't being restarted, just using the Switch Server function (the backup server are to a stratum_proxy running on my WHS.
I'll likely need the crash report (printed to standard error, or log file if one is configured) to do anything. I'll sort out a log for you tomorrow. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
|